RÅDMANSÖ Chest of 6 Drawers

Important Safety Information

⚠️ WARNING: Serious or fatal crushing injuries can occur from furniture tip-over.

ALWAYS secure this furniture to the wall using the provided tip-over restraints.

To further reduce the risk of serious injury and death from tip-overs:

• Place heaviest items in the lower drawers.
• Never let children climb or hang on drawers, doors, or shelves.

Parts and Hardware

The assembly requires various components and hardware. These include:

• Main cabinet panels (sides, top, bottom, back panels)
• Drawer components (fronts, sides, backs, bottoms)
• Legs
• Drawer slides (left and right)
• Various screws, dowels, and cam lock fasteners
• Wall mounting hardware (screws, plugs, brackets)
• Tools required: Screwdriver, hammer, drill (with appropriate bits), and potentially a wrench.

Refer to the diagrams for specific part identification and quantities.

Assembly Steps

Follow these steps to assemble your RÅDMANSÖ chest of drawers:

1. Prepare the base and side panels: Insert dowels and cam lock posts into the designated holes on the base and side panels. This typically involves inserting wooden dowels and screwing in metal posts.

   Diagrams show inserting dowels and posts into pre-drilled holes on panels.

2. Assemble the main cabinet frame: Connect the side panels to the base panel, then attach the top panel. Secure these connections using the cam locks, turning them to lock the posts in place. Ensure all connections are firm.

   Illustrations show joining panels and tightening cam locks.

3. Install drawer slides: Attach the drawer slides (CR and CL) to the inside of the cabinet frame using screws. Ensure they are oriented correctly and aligned with the pre-drilled holes.

   Diagrams show attaching metal drawer slide components to the cabinet interior.

4. Assemble the drawers: Construct each of the six drawers by connecting the drawer sides, back, and front panels using dowels and screws. Slide the drawer bottom into the grooves.

   Illustrations show assembling drawer boxes and inserting drawer bottoms.

5. Attach drawer slides to drawers: Mount the corresponding drawer slide components (DR and DL) to the sides of each assembled drawer, securing them with screws.

   Diagrams show attaching drawer slide parts to the exterior of the drawer boxes.

6. Attach the back panel: Carefully slide or attach the back panel(s) into the grooves or against the rear of the cabinet frame. Secure it with small screws or nails as indicated.

   Illustrations show fitting the thin back panel into place.

7. Attach the legs: Screw the legs into the designated mounting points on the underside of the cabinet base. Ensure they are tightened securely.

   Diagrams show screwing the legs into the base of the unit.

8. Insert drawers: Carefully slide the assembled drawers into the cabinet, aligning the drawer slides with the corresponding tracks inside the frame. They should click into place.

   Illustrations show sliding drawers into the cabinet and a close-up of the slide mechanism engaging.

9. Final securing: Some steps may involve final tightening of screws or attaching decorative elements. Ensure all parts are secure.

   Final illustrations show the completed unit and potential final securing points.

Wall Mounting (Crucial for Safety)

To prevent tip-over accidents, it is essential to secure the furniture to the wall using the provided anti-tip hardware.

The supplied screws and plugs are designed for use with most solid (A) and hollow (B) walls. For solid wood (C) walls, use the screws without plugs.

Steps for Wall Mounting:

1. Identify the appropriate mounting points on the furniture and the wall.
2. Drill holes in the wall according to the size of the plugs and the required depth.
3. Insert the wall plugs into the drilled holes.
4. Attach the mounting bracket to the furniture using the provided screws.
5. Align the furniture with the wall and secure the bracket to the wall using the appropriate screws and plugs.

⚠️ If you are uncertain about the correct wall mounting procedure or the type of wall you have, seek professional advice.