LÖNSET Slatted Bed Base Assembly Instructions
Product Overview
This document provides assembly instructions for the IKEA LÖNSET slatted bed base.
Illustration: A line drawing of the LÖNSET slatted bed base.
IKEA Logo and "Design and Quality IKEA of Sweden"
Before You Begin
Ensure you have all parts and tools before starting assembly. If you encounter any issues, contact IKEA customer support.
Illustration: Person with a screwdriver and a cross mark, indicating a tool is needed but not provided.
Illustration: Person looking confused at bed frame parts, then a person on the phone outside an IKEA store.
Parts List
| Part | Description | Quantity |
|---|---|---|
| 100006 | Allen Key | 1x |
| 100229 | Screw | 12x |
| 109049 | Screw | 2x |
| 100823 | Washer | 2x |
| (Slats) | Wooden Slats | 10x |
| (Support) | Long Support Beam | 18x |
| (End Caps) | End Caps for Slats | 3x |
| (Connecting Piece) | Connecting Piece for Slats | 2x |
| (Strap) | Assembly Strap | 1x |
Assembly Steps
Step 1
Illustration: Attaching the first two wooden slats to the side support beams using screws (100229) and the Allen key (100006). A close-up shows the screw insertion.
Illustration: Close-up showing the correct and incorrect way to insert the screws into the pre-drilled holes.
Step 2
Illustration: Attaching the remaining slats to the support beams. The slatted base is shown partially assembled.
Illustration: Close-up showing screws (100229) being inserted into the support beams to secure the slats. Another close-up shows the correct placement of the screws and a crossed-out image showing incorrect placement.
Step 3
Illustration: Inserting the wooden slats into the connecting pieces on the support beams. Arrows indicate the direction of insertion.
Illustration: Close-up showing the slats being pushed into the plastic connectors. Another close-up shows the correct way to engage the connectors and a crossed-out image showing incorrect engagement.
Step 4
Illustration: Continuing to insert the wooden slats into the connecting pieces. The slatted base is nearly complete.
Illustration: Close-up showing the slats being inserted into the connectors. Another close-up shows the correct method of insertion and a crossed-out image showing incorrect insertion.
Step 5
Illustration: The completed slatted bed base, ready to be placed in a bed frame.
Illustration: Close-up showing the final placement of the slats and connectors, with a crossed-out image indicating an incorrect assembly.
Step 6
Illustration: Securing the slatted base to the bed frame using screws (100006) and washers (100823). A close-up shows the screw and washer being used.
Illustration: The slatted base is shown being folded or tilted for placement.
Step 7
Illustration: Final assembly step, securing the slatted base to the bed frame. Screws (109049) and washers (100823) are used.
Illustration: A close-up shows the screw (109049) and washer (100823) being inserted into the frame to secure the slatted base. Arrows indicate the direction of fastening. X marks indicate incorrect placement.
Step 8
Illustration: The completed LÖNSET slatted bed base placed inside a bed frame.
Information icon: Indicates a general note or tip.
Care Instructions
Wipe clean with a damp cloth.
