Metal Storage Shed Owner Manual & Assembly Guide

Customer Service

If you have any problem, please contact us through the online platform.

Base Size

All parts are packed in a box, please note that refer to the parts list to check if all parts are received.

Before You Begin

Tools Required (Not Included)

• Electric Screwdriver
• Manual Screwdriver
• Ladder

Package Included Tools

• Gloves x 1 Pair
• Spanner x 1

Important Safety Information

⚠️ ATTENTION

Care MUST be taken when handling various pieces of your building since many contain sharp edges.

DO NOT attempt to assemble your building before double checking that you have all parts indicated in the parts lists. Any building left partially assembled may be seriously damaged by even light winds.

DO NOT attempt to assemble your building on a windy day; the large panels can catch the wind like a "sail", making construction difficult and unsafe. Watch the weather closely.

Keep children and pets away from the worksite during construction and until the building is completely assembled. This will help avoid distractions and any accidents which may occur.

Never concentrate your weight on the roof of the building.

Before assembling any parts, your base should be constructed and an anchoring system should be ready to use. Your building must be anchored to prevent wind damage.

Assembly Guidelines

The best location is a level area with good drainage. Allow enough space outside the building to be able to access the roof with a ladder. USE TEAMWORK: Two or more people are required to assemble your building.

Care & Maintenance

DO NOT use power washing to clean your shed. Combustibles and corrosives must be stored in air-tight containers designed for chemical and/or combustible storage.

Rust Protection Precautions

Avoid nicking or scraping the coating surface, inside and out.

PLEASE KEEP THIS INSTRUCTION FOR FUTURE REFERENCE.

Hardware List

For missing or damaged parts, contact customer service. DO NOT return to store.

Hardware Views by Key No.:

[Image Description: Visual representations of hardware items corresponding to Key Numbers 1 through 8. Item 1 shows screw F1. Item 2 shows washer V2. Item 3 shows bolt and nut F2. Item 4 shows screw F3. Item 5 shows screw F6. Item 6 shows bolt and nut F7. Item 7 shows spanner M4. Item 8 shows two hand symbols labeled ST.]

Part List

Shed Top Panels

[Image Description: Diagram showing various parts for the shed top panels. Labeled parts include GD, DF, L35-10, L35-12, L35-13, L35-8, L35-9, and L35-11. Arrows indicate how these parts are arranged.]

Shed Top Frame

[Image Description: Diagram illustrating the assembly of the shed top frame. Parts C13, L35-6, L35-3L, L35-3R, GC, DH1, L35-5, L35-7, L35-4, and DB are shown being connected to form the frame structure. Magnified views highlight connection points.]

Shed Side Panels

Door Components

[Image Description: Diagram showing the assembly of shed side panels and door components. Various parts like L35-W5CL, L35-W5C, L35-W5, T-F, L35-1, L35-2, L35-14, L35-W5CR, L35-UA, DH, L35-DA, L35-W5K, DDA, L35-W2HL, L35DLA, DE, L35DBA, L35DRA, and L35-W2HR are depicted. Arrows and callouts indicate how they connect.]

Shed Base Frame Assembly

[Image Description: Diagram illustrating the assembly of the shed base frame. Two L35-1 parts and two L35-2 parts form the rectangular base. T-F connectors are used at the corners, and the structure is secured with F1 screws. A magnified view shows the corner connection detail with T-F and F1 screws.]

⚠️ The frame is sharp; wear gloves during installation to avoid scratches.

Shed Side Panels Assembly

[Image Description: Diagram showing the assembly of shed side panels. Two main side panels, L35-W5CL and L35-W5C, are shown. A magnified view details the attachment of L35-W5C panels using F2 fasteners and F1 screws. Another magnified view shows the connection of L35-W5CL and L35-W5C panels at the base using F1 screws.]

NOTE: Please team work, need more than two people together to install. ⚠️

Side Panel Installation

[Image Description: Diagram showing the installation of vertical support panels L35-3L and L35-3R onto the side panels L35-W5CL and L35-W5CR. The diagram indicates an 'UP' and 'DOWN' orientation for these parts. A magnified view shows the attachment using F1 screws. A note specifies that there are 7 holes on one side connected to the side panels.]

⚠️ Please pay attention to the installation direction of Part [L35-3L] and Part [L35-3R]. There are 7 holes on one side connected to the side panel [L35-W5CL] and [L35-W5CR].

Horizontal Panel Installation

[Image Description: Diagram showing the installation of horizontal panels L35-W5 onto the side panels. The main structure is shown with L35-W5 panels being attached. Magnified views detail the attachment points using F2 fasteners and F1 screws at the base and mid-section of the side panels.]

Top Front/Back Panel Installation

[Image Description: Diagram showing the installation of the L35-4 panel, which appears to be a top front or back support. The panel is attached to the side walls using F1 screws. Magnified views show the connection points and the use of F1 screws.]

Corner Support Installation

[Image Description: Diagram illustrating the installation of corner support parts L35-UA and L35-5. L35-UA parts are attached to the corners of the structure using F1 screws and F2 fasteners. L35-5 is shown as a long support beam attached to the structure, secured with F1 screws.]

Corner Reinforcement

[Image Description: Diagram showing the installation of corner reinforcement parts L35-6 and C13. L35-6 parts are attached to the top corners, and C13 pieces are used for corner connections. The assembly is secured with F1 screws. A magnified view shows the attachment of L35-6 and C13 at the corner, with a note indicating 'F1*3' for a specific connection.]

Bracket and Hinge Assembly

[Image Description: Diagram showing the attachment of bracket part L35-14 and EE components. L35-14 is secured using F1 screws, and EE components are attached to it using F2 fasteners. Two views show the assembly process.]

Roof Support Installation

[Image Description: Diagram showing the installation of roof support beams L35-7. These beams are attached to the top corners of the structure using F1 screws. A magnified view details the attachment.]

[Image Description: Diagram showing the installation of GC and DB components, likely for door or roof mechanisms. GC parts are attached, and DB is connected to it using F7 fasteners and F1 screws. A magnified view details the connection.]

Shed Top Assembly

[Image Description: Diagram illustrating the assembly of the shed top. Parts L35-8, L35-9, L35-10, L35-12, and L35-13 are shown. The diagram depicts the arrangement of these panels to form the shed roof. A magnified view shows the attachment of the shed top panels using F1 screws.]

The inside of the shed top panel: [Image Description: Detailed view of the inside of the assembled shed top panel, showing the arrangement of supporting parts and connection points.]

The outside of the shed top panel: [Image Description: Detailed view of the outside of the assembled shed top panel, showing the panel arrangement and securing points.]

Shed Top Panel Inner Assembly

[Image Description: Diagram showing the assembly of the inner part of the shed top panel using L35-11 components. The assembly involves L35-11 panels, F2 fasteners, F1 screws, and V2 washers. Magnified views show the connection details.]

The inside of the shed top panel: [Image Description: Detailed view of the inside of the shed top panel assembly, showing the arrangement of L35-11 components and fasteners.]

Additional Assembly Components

[Image Description: Diagram showing various assembly components. Parts DB, GG1, FF, and DH1 are listed with quantities. Step 1 shows a base structure. Step 2 shows attachment of GG1 and FF with F1 screws. Step 3 shows attachment of DH1 with F1 screws. Step 4 shows attachment of GD parts.]

Final Assembly Steps

[Image Description: Diagram showing the final assembly stages. The shed frame is shown, and the shed top panel is being placed and secured. A magnified view shows the attachment of the shed top to the frame using F1 screws.]

Roof Mechanism

[Image Description: Diagram showing the final step of attaching a rod into a connector for the roof mechanism. A warning icon is present.]

⚠️ Force the rod into the connector.

Door Assembly

[Image Description: Diagram illustrating the assembly of the doors. Two types of door panels are shown: L35-W5K and L35-W2HL. The diagram provides a view from the front, indicating that the vertical rod covers the horizontal rod, and the larger hole covers the smaller ones. Door components DDA, L35DA, L35DLA, L35DBA, L35DRA, and L35-W2HR are also shown with their respective fasteners.]

Please follow the steps of 1-2-3-4. The final fixation should be done after all parts are aligned.

Door Assembly (Continued)

[Image Description: Diagram illustrating the assembly of the doors, similar to the previous page but potentially for a different door configuration or side. It shows L35-W5K and L35-W2HR panels. The diagram provides a view from the front, indicating that the vertical rod covers the horizontal rod, and the larger hole covers the smaller ones. Door components DDA, L35DA, L35DRA, L35DBA are also shown with their respective fasteners.]

Please follow the steps of 1-2-3-4. The final fixation should be done after all parts are aligned.

Door Hinges and Latches

[Image Description: Diagram showing the installation of door hardware including DH, DC, F3, and DE components. DL and DR represent the left and right doors. Magnified views show the attachment of DH to the door frame with F1 screws, and the attachment of DE latch mechanism with F2 screws. V2 and DC are also shown.]

Door Attachment and Final Details

[Image Description: Diagram showing the attachment of the assembled doors (DL and DR) to the shed. The diagram also shows the attachment of DF and SL components, likely for door sealing or support. F3 fasteners are used for attachment. Magnified views show the connection of DF to the door frame and SL to the shed body.]