EJEAS Q2 Motorcycle Intercom System User Manual

Product Details

This section details the components and features of the EJEAS Q2 Motorcycle Intercom System.

• Indicator (?): Visual status indicator.
• Antenna (?): For wireless communication.
• Power/Phone Button (?): Controls power and phone functions.
• Intercom/FM Button (?): Controls intercom and FM radio functions.
• Volume + (➕): Increases volume.
• Volume - (➖): Decreases volume.
• Type-C (?): Charging port.
• Earphone interface (?): For connecting earphones.

Application (APP)

The SafeRiding APP allows you to set up intercom groups, stay in touch with friends, view the multi-language user guide, and access more features. Download the app from ejeas.com/support.

Download options:

• SafeRiding APP: ⬇️
• iOS: ?
• Android: ?

Product Installation

Follow these steps to install the EJEAS Q2 on your helmet:

1. Step 1: Attach the main unit to the helmet using the provided adhesive mount or clip. Diagrams show two methods for helmet attachment.
2. Step 2: Connect the microphone and the earphone speakers to the main unit.
3. Step 3: Route the cables along the helmet and secure them using the included clips or adhesive guides. Diagrams show cable routing.
4. Step 4: Securely attach the main unit to the helmet mount.
5. Step 5: The installation is complete.

Product Operations

Operation Diagram

Understand the different button press actions:

• Single-click: A brief press of a button.
• Double-click: Pressing a button twice in quick succession.
• Long press for 5s: Press and hold a button for approximately 5 seconds.
• Simultaneous click: Pressing multiple buttons at the same time.

Basic Operations

Power ON/OFF

Please charge the device before use.

• To turn ON: Press and hold the Power/Phone Button for approximately 1 second. You will hear a prompt tone. The device enters standby mode with a slow flashing blue light.
• To turn OFF: Press the Phone Button and Intercom Button simultaneously. The lights will turn off.

Battery Level

Check the battery status:

• Press and hold the Power/Phone Button for approximately 3 seconds.
• The device will announce the battery level: "Battery Level High", "Battery Level Medium", or "Battery Level Low".

Status Indicators

Low Battery Indication

When the battery is low, the red light flashes twice, and you will hear the prompt "Low Battery".

Charging Indication

• Charging: The indicator light is constantly red.
• Full Charge: The red light turns off.

Volume Control

FM and intercom can be used at the same time.

• Intercom / Calling / Music / FM: Use the Volume + (➕) and Volume - (➖) buttons to adjust the volume.
• Simultaneous Use: When Intercom & FM are used simultaneously, the Volume + (➕) and Volume - (➖) buttons control the FM volume.

Factory Reset

To restore the device to its default settings:

• Long press the Volume + (➕), Volume - (➖), and Phone Button simultaneously for 5 seconds.
• The red and blue lights will quickly flash four times simultaneously. You will hear the prompt "Restore Default Setting".

Bluetooth Intercom

Intercom Pairing

1. Long press the Intercom Button for 5 seconds to enter the pairing mode.
2. Lights: Red and blue lights flash fast alternately. Prompt: "Intercom Pairing".
3. The device will search and pair.
4. Upon successful pairing, you will hear "Intercom Pairing Successful".
5. Once connected, you can start communication.

Intercom Reconnection

The device will prompt "Intercom Connected" when reconnected.

Intercom Disconnection

To disconnect the intercom, press the Intercom Button for 1 second. You will hear "Intercom Disconnected".

Compatible with Old Intercom Pairing

This section describes pairing with older intercom models.

1. Step 1: Long press both the Volume - (➖) button and the Intercom Button for 5 seconds to enter the pairing mode. Lights: Red and blue flash fast alternately.
2. Step 2: Click the Intercom Button to enter Bluetooth search mode. Lights: Red and blue flash twice alternatively. Prompt: "Intercom Searching".
3. Pairing is successful when the blue light flashes slowly.
4. Step 3: Click the Intercom Button to connect.

Pairing of Other Bluetooth Devices

This function may not be compatible with all Bluetooth headsets or intercoms on the market.

1. Step 1: Long press the Intercom Button for 5 seconds to enter the pairing mode. Lights: Red and blue flash fast alternately. Prompt: "Intercom Pairing".
2. Step 2: Click the Intercom Button to enter Bluetooth search mode. Lights: Red and blue flash twice alternatively. Prompt: "Intercom Searching".
3. Step 3: Put your other Bluetooth device into its Bluetooth search mode. (Note: Supports HFP protocol).
4. Pairing is successful. Prompt: "Intercom Pairing Successful".

Bluetooth Pairing (Phone)

Phone Pairing

1. Step 1: Long press the Phone Button for 5 seconds to enter the pairing mode. Lights: Red & blue flash fast alternately. Prompt: "Phone Pairing". (If no phone is connected, it will exit pairing mode after 2 minutes).
2. Step 2: Open your phone's Bluetooth settings, search for "Q2", and pair with the device.
3. Pairing is successful. The blue light flashes slowly. Prompt: "Pairing Successful, Connected".
4. The current power level will be shown on your phone (requires phone to support HFP).

Phone Reconnection

The device will automatically connect back to the last paired phone when turned on.

Mobile Phone - Answer a Call

The device supports auto-answering calls within 8 seconds if no operation is performed.

Call Management

Reject a Call

To reject an incoming call, press and hold the Phone Button for 2 seconds.

Last Call Replay

To redial the last called number, press and hold the Phone Button for 2 seconds.

End a Call

To end an ongoing call, press and hold the Phone Button for 2 seconds.

TEL Priority

When listening to music, FM, or intercom, and a phone call is received, the call will take priority. After the call ends, the previous audio source will be restored.

Voice Assistant

Your phone must support and have the voice assistant (e.g., Google Assistant & Siri) enabled.

1. Turn on the voice assistant on your phone.
2. Long press the Phone Button for 1 second.

Music Control

• Music Play/Pause: Press and hold the Intercom Button for 2 seconds.
• Music Switching:
  • Next Track: Long press the Volume + (➕) button for 2 seconds. (Indicated by a forward arrow ➡️).
  • Previous Track: Long press the Volume - (➖) button for 2 seconds. (Indicated by a backward arrow ⬅️).

FM Radio

FM frequency range: 76~108MHz. Auto search and radio, intercom, and radio can work at the same time.

FM ON/OFF

• To open FM: Double click the FM Button. The blue light will be on for 4 seconds. A quick double flash of the red light indicates an error or issue. Prompt: "FM Radio".
• To close FM: Double click the FM Button. Prompt: "FM Radio Off".

Frequency Switching

• Frequency -: Long press the Volume - (➖) button for 2 seconds. (Indicated by a backward arrow ⬅️).
• Frequency +: Long press the Volume + (➕) button for 2 seconds. (Indicated by a forward arrow ➡️).

EUC Remote Control (Optional)

Details of the EUC Remote Control buttons:

• FM (?)
• Useless Button
• Useless Button
• Intercom Button (?️)
• Volume + (➕)
• Phone (?)
• Volume - (➖)

EUC Pairing

1. Step 1: Clear EUC pairing record: Long press both the FM Button and Volume - (➖) button of the EUC for 5 seconds. Lights: Red and Blue lights consistently on.
2. Step 2: Pair EUC: Long press both the Phone Button and Volume - (➖) button for 5 seconds. Lights: Red and blue lights flash alternately and quickly. Prompt: "Remote Control Pairing".
3. Step 3: Click any key on the EUC to complete the pairing.
4. Pairing is successful. Prompt: "Pairing Successful". (If the EUC cannot be successfully paired within 2 minutes, it will automatically exit the pairing mode.)

FM ON/OFF (for EUC)

• To open FM: Click the FM Button.
• To close FM: Click the FM Button.

FCC Compliance

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.