System connector FMA-FUS
The system connection of FMP massive profiles and FUS mounting channels.
Multidimensional channel structures: Two images depict the FMA-FUS system connector. The first shows the connector mounted on a base plate, forming a multidimensional profile structure. The second image displays a vertical FUS mounting channel connected to a profile using the FMA-FUS system connector.
Applications
- Construction of multidimensional profile structures.
- Constructing variable supporting structures from profiles.
- For indoor and outdoor application.
Advantages
- The FMA-FUS system connector, when used as a saddle flange, allows the mounting of FUS mounting channels in various heights via screw connections with the FCN Clix P channel nut.
- The design of the FMA-FUS system connector, featuring long slots and grating to match the FMHB hammer-head push connector, enables optimum adjustment of the structure and simplifies the assembly process.
- The strong construction of the FMA-FUS system connector allows optimum transmission of the applied loads in the application as an angle.
Properties
- Base plate: steel S355 (material no. 1.0976) according to DIN EN 10149-2
- Profile mount: steel S235JR (material no. 1.0038) according to DIN EN 10025-2
- Zinc plating: hot-dip galvanised
Installation FMA-FUS
Diagram showing the installation of the FMA-FUS system connector. It illustrates connecting FUS mounting channels to profiles at various angles (e.g., 90°) and heights, with a specified installation torque (Tinst) of 75 Nm.
Technical Data
| Item | Item no. | Length L [mm] | Width B [mm] | Height H [mm] | Thickness S [mm] | Sales unit [pcs] |
|---|---|---|---|---|---|---|
| FMA-FUS | 568824 | 250 | 90 | 95 | 8.0 | 6 |
Technical drawing of the FMA-FUS connector with dimensions labeled: L (Length), B (Width), H (Height), S (Thickness).
