Mounting Angle FMA
The application-oriented connection of FMP massive profiles to built up racks
Product Overview
The Fischer Mounting Angle FMA is designed for creating supporting structures using FMP massive profiles, suitable for both indoor and outdoor applications. It facilitates application-oriented connections that align with the three different construction heights of FMP massive profiles.
A specific version features slotted holes and grating, designed to accommodate the toothed plate of the hammer bolt connector FMHB. This design optimizes construction adaptation and simplifies the mounting process.
Each FMA article is supplied as a set, including the necessary screws, hexagonal nuts, and washers, ensuring error-free installation.
Key Features:
- Applications: Mounting elements for supporting structures with FMP massive profiles. Suitable for indoor and outdoor use.
- Advantages: Enables application-oriented connections matching FMP profile heights. Simplified mounting with slotted hole version for FMHB connector. Error-free installation with included hardware sets.
- Properties:
- Material: Steel S235JR (material no. 1.0038) according to DIN EN 10025-2
- Zinc plating: Hot-dip galvanised
- Screw material: Steel grade 8.8
Installation Note: The installation process involves a 90-degree angle connection, utilizing a hammer bolt connector (FMHB) and requiring a torque of 75 Nm for secure tightening.
Technical Data
The following table details the specifications for the Fischer Mounting Angle FMA series.
| Item | Item no. | Length L [mm] | Width B [mm] | Height H [mm] | Thickness S [mm] | Sales unit [pcs] |
|---|---|---|---|---|---|---|
| FMA 90 | 547844 | 277.5 | 77.5 | 148 | 6.0 | 4 |
| FMA 120 | 547845 | 277.5 | 77.5 | 148 | 6.0 | 4 |
| FMA 160 | 547846 | 350 | 77.5 | 148 | 6.0 | 4 |
The dimensions of the mounting angle are characterized by Height (H), Length (L), Thickness (S), and Width (B).
