fischer Variable Bracket VB Series

Image Description

A metal bracket assembly is shown, with one part angled upwards and connected to another part via a pivot. This assembly is mounted to a wall or ceiling structure, supporting a horizontal channel beam which is braced by a diagonal element. The overall impression is one of robust structural support.

Applications

• Variable bracket to build up and strengthen supporting structures of FUS channel constructions with an angle from 0° to 180°.
• For use in dry interior areas.

Advantages

• The design of the variable bracket VB enables the fixation of mounting channels at an angle of 0° to 180°.
• Due to the holes on all three sides, the channels can be installed with the slot lateral.
• The punched holes in the base plate allow the direct fixing to the substructure or onto a mounting channel.

Properties

• Material: steel S235JR (material no. 1.0037) acc. to DIN EN 10025
• Zinc plating: electro zinc-plated

Technical Data

See channel nut FCN Clix P for loads.

Diagram Description

A technical drawing of the bracket shows a main body with multiple mounting holes. Key dimensions are indicated: a length of 128 units, a width of 50 units, a height of 135 units, a central M12 threaded hole, and smaller dimensions of 38 and 13 units. The bracket is labeled 'VB'.

Image Description

A metal bracket assembly is shown, with one part angled upwards and connected to another part via a pivot. This assembly is mounted to a wall or ceiling structure, supporting a horizontal channel beam which is braced by a diagonal element. The overall impression is one of robust structural support.

Applications

• Variable bracket to build up and strengthen supporting structures of FUS channel constructions with an angle from 0° to 180°.
• For indoor and outdoor application.

Advantages

• The design of the variable bracket VB enables the fixation of mounting channels at an angle of 0° to 180°.
• Due to the perforations on all sides of the VB, channels can be mounted with the channel opening facing downwards or laterally.
• The punched holes in the base plate allow the direct fixing onto a wall, ceiling or onto a mounting channel.

Properties

• Material: steel S235JR (material no. 1.0037) acc. to DIN EN 10025
• Zinc plating: hot-dip galvanised

Technical Data

See channel nut FCN Clix P hdg. for loads.

Diagram Description

A technical drawing of the bracket shows a main body with multiple mounting holes. Key dimensions are indicated: a length of 128 units, a width of 50 units, a height of 135 units, a central M12 threaded hole, and smaller dimensions of 38 and 13 units. The bracket is labeled 'VB'.

Image Description

A metal bracket assembly is shown, with one part angled upwards and connected to another part via a pivot. This assembly is mounted to a wall or ceiling structure, supporting a horizontal channel beam which is braced by a diagonal element. The overall impression is one of robust structural support.

Applications

• Variable bracket to build up and strengthen supporting structures of FUS channel constructions with an angle from 0° to 180°.
• For indoor and outdoor applications and in environments with high stress to components due to corrosion.

Advantages

• The design of the variable bracket VB enables the fixation of mounting channels at an angle of 0° to 180°.
• Due to the perforations on all sides of the VB, channels can be mounted with the channel opening facing downwards or laterally.
• The punched holes in the base plate allow the direct fixing onto a wall, ceiling or onto a mounting channel.

Properties

• Material: stainless steel A4 (material no. 1.4401)

Technical Data

See channel nut FCN Clix P A4 for loads.

Diagram Description

A technical drawing of the bracket shows a main body with multiple mounting holes. Key dimensions are indicated: a length of 128 units, a width of 50 units, a height of 135 units, a central M12 threaded hole, and smaller dimensions of 38 and 13 units. The bracket is labeled 'VB'.