Pure & Easy Assembly Instructions
Model: BZKY-V2
Notice
IMPORTANT: RETAIN FOR FUTURE REFERENCE. READ CAREFULLY.
Assemble on a flat, clean, and soft surface.
Professional installation is highly recommended.
Periodically check that all components are tightly secured.
It is recommended that multiple people assemble this product.
Parts List
Below is a list of all components and hardware required for assembly. Please verify you have all parts before beginning.
| Item No. | Description | Quantity |
|---|---|---|
| 1 | Long plank with holes | 1 pc |
| 2 | Long plank with holes | 1 pc |
| 3 | Short plank with holes | 1 pc |
| 4 | Short plank with holes | 1 pc |
| 5 | Long plank | 1 pc |
| 6 | Long plank | 1 pc |
| 7 | Rectangular panel | 2 pcs |
| 8-1 | Component set | 1 pc |
| 8-2 | Component set | 1 pc |
| 9 | Large rectangular panel | 1 pc |
| 10 | Large rectangular panel | 1 pc |
| 11 | Large rectangular panel | 1 pc |
| 12 | Long plank | 1 pc |
| 13 | Long plank | 1 pc |
| 14 | Long plank | 1 pc |
| 15 | Long plank | 1 pc |
| 16 | Long support piece | 2 pcs |
| 17 | Long support piece | 2 pcs |
| 18 | Vertical support post | 2 pcs |
| 19 | Long support piece | 2 pcs |
| 20 | Long support piece | 1 pc |
| 21 | Long support piece | 2 pcs |
| 22 | Long support piece | 2 pcs |
| 23 | Vertical support with connection point | 1 pc |
| 24 | Small dowel/pin | 10 pcs |
| 25 | Slatted bed base | 4 pcs |
| 26 | Bracket piece | 4 pcs |
| 27 | Small feet/casters (4 pcs), L-shaped brackets (4 pcs), R-shaped brackets (4 pcs) | 4 pcs total for feet/casters, 4 pcs for L-brackets, 4 pcs for R-brackets |
| 28 | Electrical component with wires and plug | 1 pc |
| 29 | Remote control | 1 pc |
| A | M6x10mm screw | 54 pcs |
| B | M6x16mm screw | 20 pcs |
| C | M6x20mm screw | 2 pcs |
| D | M6x25mm screw | 4 pcs |
| E | M6x40mm screw | 12 pcs |
| F | M8x35mm screw | 2 pcs |
| G | M8x55mm screw | 1 pc |
| H | M6x18mm screw | 6 pcs |
| I | M6x16mm screw | 4 pcs |
| J | M7x40mm screw | 10 pcs |
| K | M3x12mm screw | 36 pcs |
| L | M3x30mm screw | 12 pcs |
| M | M6 connector | 2 pcs |
| N | Bracket with screw | 1 pc |
| O | Small connector/bracket | 20 pcs |
| P | M4x10mm screw | 2 pcs |
| Q | Hinge-like connector | 4 pcs |
| R | Screw-like foot | 5 pcs |
| T | Angled bracket | 2 pcs |
| V | Connector set | 3 pcs |
| X | Bracket | 1 pc |
| Y | Anti-skid pad | 2 pcs |
Assembly Steps
- Step 1: Attach parts 1, 3, 4, and 5 to the main frame using part E screws (6 pcs).
- Step 2: Connect parts 7, 8-1, 8-2, 1, 4, and 5 to the frame using part A screws (20 pcs).
- Step 3: Secure parts 9, 10, and 11 to the frame using parts A (4 pcs), D (4 pcs), and J (4 pcs) screws. A bottom view is provided for clarity.
- Step 4: Attach parts 10, 11, 12, and 28 to the frame using parts A (2 pcs), J (6 pcs), K (2 pcs), and 28 (1 pc) screws.
- Step 5: Assemble the main structure by attaching parts 13, 11, 12, and 10 using parts K (34 pcs), L (12 pcs), P (2 pcs), T (2 pcs), Q (4 pcs), V (3 pcs), and X (1 pc) screws and connectors.
- Step 6: Attach parts 14 and 15 to the frame using part A screws (8 pcs).
- Step 7: Install support components. Attach parts 16 (2 pcs), 17 (2 pcs), and 18 (2 pcs) using parts B (4 pcs), H (4 pcs), and R (2 pcs) screws/feet.
- Step 8: Secure the frame further by attaching parts 15, 16, 17, and 18 using part B screws (8 pcs).
- Step 9: Attach parts 19 (2 pcs) and 20 (1 pc) to the frame using part E screws (6 pcs).
- Step 10: Install vertical supports and feet. Attach parts 21 (2 pcs), 22 (2 pcs), and 23 (1 pc) using parts C (2 pcs), F (2 pcs), H (2 pcs), and R (3 pcs) screws.
- Step 11: Secure the main structure using parts 20, 21, and 23 with parts B (4 pcs) and G (1 pc) screws.
- Step 12: Attach anti-skid components. Secure parts 24 (10 pcs) and O (20 pcs) to the frame.
- Step 13: Connect the electrical component (29) to the unit.
- Step 14: Attach the slatted bed bases (25, 4 pcs) to the frame using part 27 (8 pcs).
- Step 15: Attach the slatted bed bases (25, 4 pcs) to the frame using part 27 (16 pcs).
- Step 16: Secure the slatted bed bases (25, 4 pcs) to the frame using parts 26 (4 pcs), A (20 pcs), and 27 (4 pcs).
- Step 17: Attach brackets (26) to the frame using part I screws (4 pcs).
- Step 18: Final attachment of brackets (26) to the frame.
- Step 19: Note: Electrical components such as a power adapter and remote control are not included.
- Step 20: Attach the anti-skid pads (Y, 2 pcs) to the frame using part B screws (4 pcs).
- Step 21: Installation Completed.
Help Center
❓ Inquiry
?️ Assembly issue
? Missing parts
↩️ Returns & Refunds
If you encounter any difficulties during assembly, please contact us.
Disclaimer
Manufacturer and seller expressly disclaim any and all liability for personal injury, property damage or loss, whether direct, indirect, or incidental, resulting from the incorrect attachment, improper use, inadequate maintenance, unapproved modification, or neglect of this product.
