Pure & Easy Assembly Instructions

Notice

IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY. This notice is provided in multiple languages: German (WICHTIG, FÜR SPÄTERE NACHSCHLAGE AUFBEWAHREN: SORGFÄLTIG LESEN), Italian (IMPORTANTE, CONSERVARE PER RIFERIMENTI FUTURI: LEGGERE ATTENTAMENTE), Spanish (IMPORTANTE, GUARDAR PARA REFERENCIA FUTURA: LEER ATENTAMENTE), and French (IMPORTANT, À CONSERVER POUR RÉFÉRENCE FUTURE : LIRE ATTENTIVEMENT).

Assemble on a flat, clean and soft surface. The diagram shows a correct assembly surface and an incorrect one (marked with a cross).

Professional installation is highly recommended. The diagram shows a checkmark next to a professional installation icon.

Periodically check that all components are tightly secured. The diagram shows a gear icon, symbolizing regular checks.

Recommendations

It is recommended that multiple people assemble this product. The diagram shows two people assembling furniture, contrasted with a single person assembly with a cross mark.

Auxiliary Tools

Please have the following auxiliary tools ready:

• Hammer
• Screwdriver
• Wrench
• Measuring Tape
• Drill
• Safety Glasses

Parts List

Exploded View

The exploded view diagram provides a visual representation of all components and their intended assembly relationships, showing how the various parts fit together to form the final product.

Assembly Steps

Step 1: Separate Drawer Runners

Separate the inner and outer drawer runners. H1 denotes the outer runner, and H2 denotes the inner runner. The diagram illustrates pressing the runner lock and pulling the inner runner away from the outer runner.

Step 2: Attach Runners to Panel 7

Secure three H1 outer runners to panel 7. Use two 'A' screws and one 'C' screw for each runner. The diagram shows the placement of screws and runners on panel 7.

Step 3: Attach Runners to Panel 8

Attach three H1 runners to panel 8 using six 'D' screws and three 'H1' components (referring to the runner parts). The diagram shows the placement of these components.

Step 4: Attach Runners to Panel 9

Attach three H1 runners to panel 9 using six 'D' screws and three 'H1' components. The diagram illustrates the correct placement.

Step 5: Attach Runners to Panel 10

Secure three H1 runners to panel 10 using two 'A' screws, two 'C' screws, six 'D' screws, and three 'H1' components. The diagram shows the assembly process.

Step 6: Attach Runners to Panel 13

Attach runners to panel 13 using four 'A' screws and four 'C' screws. The diagram shows the runner attachment points.

Step 7: Connect Panels 7 and 13

Connect panel 7 to panel 13 using four 'B' components (plastic dowels/connectors). The diagram shows the connection points.

Step 8: Connect Panels 8 and 9

Attach panels 8 and 9 to the main structure using four 'B' components each. The diagram shows the insertion of these connectors.

Step 9: Insert Panel 14

Slide panel 14 into the designated slots within the structure. The diagram shows the direction of insertion.

Step 10: Attach Panels 15

Secure panels 15 to the structure using eight 'C' screws and twelve 'E' screws. The diagram shows the attachment points.

Step 11: Assemble Small Frame Units

Assemble two small frame units using parts 27 and 28. Use eight 'J' screws in total for this step. The diagram shows the assembly of these two units.

Step 12: Attach Runners (K) to Side Panels

Attach sixteen 'K' components (runners) to the side panels. The diagram shows the screws and runner placement.

Step 13: Attach Side Panels

Connect the side panels to the main structure using two 'E' screws per panel. The diagram shows the connection points for left and right sides.

Step 14: Attach Top Panels 11

Attach the top panels, labeled 11, to the main structure. The diagram indicates the placement and orientation.

Step 15: Assemble Components 1, 2, 4

Assemble components 1, 2, and 4 together using eight 'A' screws. The diagram shows the assembly of these base components.

Step 16: Attach Components to Base Structure

Attach components 1, 2, 3, and 4 to the base structure using eight 'B' components. The diagram illustrates the connection points.

Step 17: Attach Components 5

Secure component 5 to the base structure using ten 'A' screws and five 'C' screws. The diagram shows the screw placement.

Step 18: Attach Components 5 to Structure

Attach components 5 to the main structure using ten 'B' components. The diagram shows the connection points.

Step 19: Attach Components 6

Attach component 6 to the frame using 'A' and 'C' screws. The diagram shows the component being rotated into place.

Step 20: Attach Doors/Panels

Attach the doors or side panels to the main unit using four 'B' screws and nine 'E' screws. The diagram shows the attachment of these panels.

Step 21: Attach Mirror Assembly

Secure the mirror assembly to the main unit using six 'B' screws. The diagram shows the mirror assembly being lowered into place.

Step 22: Attach Drawer Runners (H1)

Attach H1 drawer runners to the main unit using eight 'D' screws and four 'H1' components. The diagram shows the runner installation.

Step 23: Attach Mirror Assembly to Unit

Secure the mirror assembly to the main unit using nineteen 'D' screws, eighteen 'B' screws, and one 'R' component. The diagram shows the final attachment of the mirror assembly.

Step 24: Assemble Units (16+17)

Assemble two units using parts 16 and 17, securing them with eight 'A' screws. The diagram shows the assembly of these two identical units.

Step 25: Attach Panels 18 and 19

Attach panels 18 and 19 to the previously assembled units using eight 'E' screws. The diagram shows the panels being attached.

Step 26: Insert Panel 21

Insert panel 21 into the drawer assembly. The diagram shows the panel sliding into place.

Step 27: Assemble Drawer Sides

Assemble the drawer sides using eight 'B' components and parts 16+17. The diagram shows the connection of the drawer sides.

Step 28: Assemble Drawer Base

Assemble the drawer base using two 'F' screws and two 'G' screws. The diagram shows the screws securing the drawer base.

Step 29: Attach Drawer Runners (H2)

Attach H2 drawer runners to the drawer assembly using eight 'D' screws and four 'H2' components. The diagram shows the runner installation on the drawer.

Step 30: Assemble Drawer Fronts/Sides

Assemble the drawer fronts and sides using twenty-four 'A' screws for component 22. The diagram shows the attachment of the drawer front.

Step 31: Assemble Drawer Sides (E)

Assemble the drawer sides using twenty-four 'E' screws for components 23, 24, and 25. The diagram shows the assembly of the drawer box.

Step 32: Insert Panel 26

Insert panel 26 into the drawer assembly. The diagram shows the panel sliding into the drawer structure.

Step 33: Assemble Drawer Sides (B)

Assemble the drawer sides using twenty-four 'B' components for component 22. The diagram shows the drawer assembly.

Step 34: Assemble Drawer Base (F, G)

Assemble the drawer base using six 'F' screws and six 'G' screws. The diagram shows the screws securing the drawer base.

Step 35: Attach Drawer Runners (H2)

Attach H2 drawer runners to the drawer assembly using twenty-four 'D' screws and twelve 'H2' components. The diagram shows the runner attachment to the drawer.

Step 36: Attach Mirror Assembly (N)

Attach the mirror assembly (N) to the main unit. The diagram shows the mirror assembly being lowered onto the vanity top. It also provides instructions for attaching drawer runners to panels, emphasizing correct alignment and screw placement.

Step 37: Attach Components with Screws

Attach components using 'D' screws and 'L' components. The diagram shows the attachment of the mirror assembly to the vanity.

Step 38: Final Connections

Make final connections using 'P' components. The diagram shows the 'P' component being attached to the vanity structure.

Step 39: Assemble Frame Units

Assemble frame units using parts 29, 30, 31, and 33. Use six 'J' screws for each unit. The diagram shows the assembly of these frame structures.

Step 40: Attach Base to Frame

Attach the base (part 32) to the assembled frame units using six 'K' screws. The diagram shows the frame being placed onto the base and secured.

Step 41: Attach Mirror Assembly

Attach the mirror assembly using two 'Q' components. The diagram shows the LED light components being attached to the mirror.

Step 42: LED Light Functionality

This vanity mirror has a smart LED Light (Cold, Natural, Warm) that can be adjusted in 3 colors. A short press changes the color, and a long press adjusts the brightness. The diagram shows the mirror with the LED light.

Safety Warnings

Tip-Over Hazard: Serious or fatal crushing injuries can occur from furniture tip-over. Always secure this furniture to the wall using tip-over restraints. The diagram shows furniture tipping and causing injury, with an exclamation mark icon. It also shows furniture secured to the wall with a checkmark.

Child Safety: Never let children climb or hang on drawers, doors, or shelves. The diagram shows a child climbing on furniture with a cross mark.

Electrical Safety: When using the power supply, pay attention to the safety of electricity. The diagram shows an exclamation mark within a triangle, indicating a warning.

Help Center

If you encounter any difficulties during assembly, please contact us. The document provides contact information in multiple languages.

Email: after-sale.cs@hotmail.com

Disclaimer

Manufacturer and seller expressly disclaim any and all liability for personal injury, property damage or loss, whether direct, indirect, or incidental, resulting from the incorrect attachment, improper use, inadequate maintenance, unapproved modification, or neglect of this product. This disclaimer is provided in multiple languages including English, German, Spanish, and French.