Bazyths Smart Toilet Instruction Manual

Enjoy Your New Bazyths Smart Toilet

Please contact Bazyths Support if you have any questions.

Contact Information:
support@bazyths.com
www.bazyths.com

Catalogue

• Packing List ............................................................................ 02
• Installation of the Battery Box ................................................... 04
• How to Use Foam Shield & Toilet Bowl Cleaner Tablets.................. 05
• Component Name .................................................................... 06
• Function Introduction ............................................................... 07
• Cautions ................................................................................. 08
• Installation Instruction .............................................................. 11
• Preparation before Use ............................................................ 16
• Panel Cognition ........................................................................ 17
• How to Use .............................................................................. 20
• Function Setup and Adjustment ................................................. 21
• Cleaning and Maintenance ........................................................ 26
• FAQ ........................................................................................ 30
• Function List ........................................................................... 31
• Product Specification ................................................................ 32
• Acceptance Record .................................................................. 33

Packing List

Dear user, Please count the following items after opening the package:

Smart Toilet Unit

Remote Control & Mounting Bracket: Requires 2 alkaline AAA batteries (batteries not included).

Flange, Sealing Wax Rings, Mounting Accessory Kit

Backup Battery Box for Power Outage Flush: Requires 10 AA alkaline batteries to enable flushing during a power outage (batteries not included).

Hoses and Adapter:

• 1 Braided Hose (for Flushing Water)
• 1 Plastic Hose (for Cleansing Water) (Pre-installed)

Spare Part: 3/8" Female to 1/2" Male Adapter: If your existing shut-off valve has a 3/8" outlet, you can use this spare part to connect it to our smart toilet without the need for replacing the valve.

Installation of the Battery Box

Installation of the Battery Box for Power Outage

This battery box is for use as backup during power outages. It must not be used simultaneously with a plugged-in power source when the toilet is in operation. It is recommended to connect it to the main unit only during power outages. Bazyths accepts no responsibility for the consequences of using dual power sources at the same time, as such usage is not covered by the warranty.

Before activating the power outage flushing function, install 10 AA alkaline batteries (not supplied) into the battery box. Do not mix new and old batteries, batteries of different models, or batteries from different brands. When replacing batteries, ensure all are replaced at the same time.

Please follow the '+' and '-' signs on the battery box when installing batteries. This battery box is a series battery group, and no single cell can be reversed. Failing to do so may cause battery damage, and in severe cases, may pose safety hazards such as explosion and combustion.

Take out the battery connection cable from the rear side of the seat cover and connect it to the battery box, ensuring that it is plugged in place.

Do not disassemble the battery box unnecessarily. After replacing the battery, make sure to seal the battery box tightly. If moisture from the bathroom gets into the box, it could cause the batteries to rust and become damaged.

When replacing batteries, disconnect the battery box from the main unit.

To avoid potential hazards, this battery box cannot be recharged.

How to Use Foam Shield & Toilet Bowl Cleaner Tablets

Introduction to the Foam Shield Function

The Foam Shield creates a soft foam layer inside the toilet bowl that prevents splashing, blocks odors, and keeps the bowl cleaner. It is an innovative feature designed to enhance hygiene and provide a more comfortable and pleasant bathroom experience.

How to Get Your Free Foam Shield Liquid

For transportation safety, the foam liquid is not pre-filled in the foam shield bottle. After receiving your toilet, please contact Bazyths Support at support@bazyths.com to request the foam liquid. Your first bottle is completely free, and it will be shipped to you separately.

Replace the Foam Shield Bottle

1. Hold both hands together on the left and right sides of the decorative cover, and lift it out vertically.
2. Press the connector cap and detach the soft tube.
3. Remove the old bottle.
4. Take the connector head from the old bottle and attach it to the new bottle.
5. Place the new bottle back into the machine and reconnect the soft tube.
6. Secure the decorative cover back in place.

Note: Regardless of whether you use the Foam Shield function, please ensure that a foam liquid bottle is placed here and that the soft tube is connected to the bottle. Without a bottle, water leakage may occur.

Component Name

Seat Cover

Decorative strip

Knob

Water Pipe for Cleansing

Inlet Valve

Filter

Toilet Pan

Foot Sensor

Remote Control (with buttons for Stop, Rear, Front, Dryer, Water Temp.)

Display Screen

Dryer Device

Cleaning Nozzle

Seat Sensor

Seat Ring

Technical Drawing

Dimensions are provided for the toilet unit. The approximate dimensions are: Width 17.7" (450mm), Depth 27.6" (700mm), Height 15.4" (390mm).

Function Introduction

Below functions can be adjusted or turned on/off by remote control:

• Super Quiet Flushing: Flushing noise below 45 decibels.
• Auto lid: Auto opens the lid when human body gets close to the front of the toilet.
• Foot sense to open the lid or the seat ring: Auto opens the lid or the seat ring when human body gets close to the toilet.
• H/C massage: Cleaning water alternates between hot and cold.
• Rear cleansing: Single hole nozzle, powerful cleansing.
• Moving rear cleansing: Nozzle moves to wash with a wide range.
• Front cleansing: Special nozzle hole for female, gentle cleansing.
• Moving front cleansing: Nozzle moves to wash with a wide range.
• Strength adjustment: Adjusts cleaning strength.
• Position adjustment: Adjusts cleaning position by moving the nozzle forward and backward.
• Cleansing water temp. adjustment: 4 levels of cleaning water temperature (normal/high/medium/low).
• Warm air drying: Drying after cleansing.
• Seat sense: All functions can be conducted after being seated.
• Seat ring temp. adjustment: Built-in heating device with 4 levels of seat temperature circulation (normal/high/medium/low).
• Smart seat temp.: Auto adjusts seat temperature according to different seasons.
• Remote control: All functions can be conducted by the remote control.
• Auto flush: Auto flush after use and standing up.
• Flush by remote control: Flush by pressing the button on the remote control.
• Foot sense flush: Flush by foot sensor.
• Night light: Interior light for convenient night use.
• Nozzle cleaning: Self-cleaning function for the nozzle when unseated.
• Nozzle auto cleaning: Nozzle cleans itself before and after use.
• Blackout flush: Operates flushing functions using built-in standby battery during power outages.
• User 1 and user 2 shortcut settings: Dual user memory buttons for one-click switch to exclusive modes.
• Foam Shield: Provides deodorizing, splash-proof, anti-stick, and antibacterial protection.

Cautions

WARNING:

• ? Please do not disassemble, repair, or modify this product. May cause fire or electric shock damage.
• ? Please do not use wet hands to pull the plug. May cause electric shock damage.
• ? Please do not pour water, detergent, or deodorant, etc. on the equipment and the power plug. May cause fire or electric shock damage.
• ⚡ Only support 110V AC. Please do not put through power supply before making sure the inlet valve is open. May cause fire.
• ? No scratch, damage the wire. No change, curve/tensile, bend, bear, pinch the wire. No using loosening socket. May damage the wire, causing electric shock or fire.
• ? Do not connect with outer water supply. May cause corrosion inside and fire, or inflammation of the skin.
• ⚡ Please be sure to connect with the ground wires. It is easy to get an electric shock when failure and leakage.
• ? Do not put it in the wet area. Easy to get electric shock and fire.
• ?️ Long time using, set the temperature to the normal level. Long time using +1 level may cause scald.
• ? Keep away from fire. Easy to get on fire.
• ? Children, elderly, patients, tired persons, drunk persons, persons who have taken sleeping pills: These individuals need to be accompanied, and the dry temperature should be set to 1. Long time using +1 level may cause scald.
• ? Do not use wet hands to operate the remote control or to pull the remote. Easily leads to remote control failure.

Installation Instructions

1. Confirmation of installation environment

Before installation, please confirm that the bathroom wall and floor tiles have been completed, and that the sewage pipes, water pipes, and electrical circuits have been reserved as shown in the figure. This toilet's rough-in is 300mm (11.81in). Water inlet pressure range: 0.15Mpa (dynamic) - 0.75Mpa (static). Water inlet temperature: 4°C-35°C (39.2°F-95°F).

Diagram Description: Shows a wall, ground, water inlet, and drain outlet. Dimensions indicate required clearances: Over 300mm (11.81in) from wall to drain outlet, 100mm (3.94in) from wall to water inlet, 280mm (11.02in) from wall to toilet center.

2. Assembly of dedicated shut-off valve

Install the shut-off valve provided with the product.

Note: If your existing shut-off valve has a 3/8" outlet, you can use the provided Spare Adapter (Refer to page 3) to connect it to your smart toilet without needing to replace the valve.

Diagram Description: Shows a wall, ground, and the dedicated shut-off valve component.

3. Installation and fixation of the toilet

1. Align the "flange-ABS" on the ground drain outlet, adjust the "flange-ABS" arrow to point vertically to the wall, and mark the drilling position of the ground. Drill four holes in the ground according to the marks.
2. Install the "sealing wax ring-thin" at the bottom of the "flange-ABS".
3. Insert the "expansion plastic sleeve - small" completely into the small hole; Align the hole position and install "flange-ABS" and "sealing wax ring-thin"; Use "round head self tapping screw-5×36mm" to lock.
4. Insert the "bolt-8×43mm" into the slot of "flange-ABS"; Adjust "bolt-8 x 43mm" to make the center line of the two bolts perpendicular to the arrow marked on the flange body.

Diagram Description: Illustrates steps 1.1 to 1.4 showing the flange, sealing wax ring, screws, and bolts being assembled and fixed.

Diagram Description: Shows steps 2.1 to 2.4. Step 2.1 involves aligning the "sealing wax ring-thick" and installing it on the "flange-ABS", then inserting L-shaped plastic fixed blocks and gaskets, followed by a large washer and nut. Step 2.2 shows aligning the toilet's drain outlet with the flange. Step 2.3 shows installing a "T-shaped pad" and "flat head self tapping screw". Step 2.4 shows covering the "T-shaped pads" with "decorative caps".

Diagram Description: Shows applying glass glue at the bottom of the toilet before connection.

4. Connection for the inlet water pipe

Connect the inlet pipe with the inlet valve & filter cotton using a spanner.

Notice: Turn on the water inlet valve after installation to check for leaks.

Diagram Description: Shows the inlet hose, inlet valve, and spanner connecting the inlet hose to the valve.

The Installation Method of Remote Control

1. Check the installation of remote control batteries. Open the battery cover and insert two alkaline AAA batteries. Ensure correct polarity. Do not mix battery types or use old and new batteries together. Remove batteries if not in use for a long time.
2. Confirm the installation location of the remote control. Install it in a suitable, easily accessible area near the smart toilet.
3. Install the remote control bracket on the wall. Tear off the 3M tape backing and apply it to a dry tile surface.
4. Install remote control. Align the remote control with the bracket and insert it from top to bottom.

Preparation before Use

1. Open the inlet valve. Rotate the valve switch counterclockwise to fully open it.
2. Plug the power plug into the socket. Insert the plug into a 110V socket. The intelligent toilet will perform an automatic check and enter power-on mode. The auto-open seat cover and seat ring will self-reset; do not obstruct them. Ensure the wiring meets power supply specifications and the socket has reliable safety grounding.
3. Adjust the cleansing water temperature and the seat temperature to the appropriate level.
4. Pressing the buttons on the remote control to run each function, referring to the function adjustment instructions.

Panel Cognition

This product can be operated mostly by remote control, assisted by the host operate panel.

Remote control panel

The remote control panel includes buttons for: Stop, Rear, Front, Dryer, Water temp., Auto-lid, Smart Self-clean, Seat temp. +, Seat temp. -, Flushing, Foam shield, Night light, Position, Massage, Moving, User 1, User 2, Seat ring/Cover up, Seat cover closed.

Remote control match code instruction:

1. Press the "Front cleansing" and "Dryer" buttons on the remote control while powering on. The indicator light will flash to enter match mode.
2. Cut off and re-power the power plug. The knob indicator light flashes twice. Then press the "Stop" button on the remote control. The knob light will turn blue to indicate matching.
3. The knob indicator light returns to normal display, indicating successful matching. Wait for the host reset to complete.

Knob button (with halo)

Front Cleansing, Rear Cleansing

Press the knob to switch the function of flushing and stop.

• Vertically pressing the knob flushes once when the smart toilet is not working.
• When seated: Rotating the knob clockwise turns on the rear cleansing function. Rotating anticlockwise turns on the front cleansing function. Vertically pressing the knob stops functions like rear cleansing, front cleansing, or drying.
• When rear or front cleansing is active, rotating the knob once in the same direction activates the drying function.

Host display screen

The display screen shows icons for power, temperature level, air temperature, seat temperature, and water temperature. It cycles through these settings every 30 seconds. The screen turns off automatically about 30 seconds after the human body leaves the toilet sensor area.

How to Use

When seated on the seat

• When a "di" sound is heard, all functions start up.
• Auto clean the nozzle once.
• Start rear cleansing or front cleansing function: Start the rear or front cleaning function by remote control. Adjust cleaning position and water pressure by remote control. Start drying function by remote control. Press the "Stop" button to stop rear cleaning, front cleaning, or drying.

When unseated on the seat

• Auto flush the toilet once.

Function Setup and Adjustment

Auto-open the seat cover

When approaching the toilet, the lid will auto-open. Press the Auto-lid button on the remote control to turn this function on or off.

Lid/Seat open

This product features automatic lid/seat opening. When people approach the toilet, the lid and seat ring auto-open via foot sensor. Press the "Cover Up/Seat Up" button on the remote control to open/close the lid and seat.

Open seat cover and seat ring by foot sensor:

• When unseated and the seat cover/ring are in the low position, a single foot sensor touch opens the seat cover.
• When the seat cover is high and the seat ring is low, a single foot sensor touch opens the seat ring.
• When both are high, a single foot sensor touch closes them and flushes the toilet once. Note: If the last operation was flushing, closing the seat will not flush again.

Open seat cover and seat ring by remote control:

• While unseated, press the "open seat cover and seat ring" button on the remote to open or close them. Pressing the "close seat cover" button closes them and flushes the toilet once. Note: If the last operation was flushing, closing the seat will not flush again.

The lid/seat open/close functions cannot be used while rear cleansing, front cleansing, flushing, or other functions are active.

Rear cleansing

This function uses a single hole nozzle. Press the button on the remote control to enter rear cleansing state; the nozzle moves back and forth. Pressing the button again switches to a fixed cleansing mode where the nozzle stops moving. This can be operated circularly.

The rear cleansing function automatically turns off after 90 seconds. Other function buttons can switch to other functions or stop rear cleansing within 90 seconds. The nozzle auto-cleans before and after rear cleansing.

Front cleansing

This product features front cleansing with a feminine hole nozzle for gentle cleansing. Press the button on the remote control to enter moving cleansing state; the nozzle moves back and forth for gentle care. Pressing the button again switches to a fixed cleansing mode where the nozzle stops moving. This can be operated circularly.

The front cleansing function automatically turns off after 90 seconds. Switch to other functions or press the button to stop it directly within 90 seconds. The nozzle auto-cleans before and after front cleansing.

Water pressure adjustment

While in rear or front cleansing, pressing the rear or front cleansing button on the remote control again adjusts water pressure. 4 levels of water pressure are available.

Nozzle position adjustment

While in rear or front cleansing, pressing the button moves the nozzle back and forth to adjust the cleansing position. 5 levels of nozzle position are available. Press the button to start this function and adjust the position.

Water temperature adjustment

Press the button on the remote control. A "di" sound indicates entry into water temperature adjustment. Adjust to a comfortable water temperature for cleansing. 4 levels are available: normal, high, medium, and low. The water temperature switches levels with each press of the button.

Hot and cold massage

Press the H/C massage button on the remote control to start the H/C massage mode. The water temperature alternates between cold and hot, changing from the normal temperature to the set level. If the set level is normal, it alternates between normal and low levels.

Drying function

Press the drying button on the remote control to dry wet body parts. The drying function automatically turns off after 3 minutes. Switch to other functions or press the button to stop it within 3 minutes.

Drying temperature adjustment

Press the drying temperature button on the remote control. A "di" sound indicates entry into drying temperature adjustment. Adjust to the proper drying temperature. 4 levels are available: normal, high, medium, and low. The drying temperature switches levels with each press of the button.

Seat ring temperature adjustment

Press the seat temperature button on the remote control. A "di" sound indicates entry into seat ring temperature setting. Adjust to the proper seat ring temperature. 4 levels are available: normal, high, medium, and low. The seat ring temperature switches levels with each press of the button.

Night light

This product is equipped with a lighting function for convenient nightly use. Press the night light button to turn the function on or off.

Nozzle cleaning

Press the nozzle cleaning button on the remote control; water will flow out to clean the nozzle. This function is only available when unseated. The nozzle cleaning function turns off after 90 seconds. Press the button on the remote control to finish it.

Power button

Long press the power button on the remote control to turn off the host system.

Flushing by remote control

Press the flush button on the remote control to flush the toilet once. If cleansing is active, it will stop.

Flushing manually

Press the flushing rotary knob vertically to flush the toilet once. This function is available even if the host system is shut down. If cleansing is active, it will stop.

Flushing by foot sensor

Designed for men to urinate without needing to bend down. Foot sensor achieves flushing. The smart toilet uses capacitive induction technology. Lightly touch the ceramic sensor area with your foot; it will flush automatically after your foot leaves.

Smart power-saving mode

Activating this mode puts the host system into power saving mode. Upon use, it returns to normal mode, and the seat ring automatically heats to the set temperature.

Long press the power button on the remote control to turn the smart power-saving mode on or off. The smart toilet remembers the last operation when powered off. When starting, the knob light flashes for 10 seconds; when closing, it flashes 4 times.

In smart power saving mode, the seat ring stops heating when unseated and automatically heats to the set temperature level or smart seat temperature level when seated.

Flushing when power off

When the power is off, long press the side rotary knob for 3 seconds to start the flushing function.

Smart seat ring temperature

When the power is connected, the toilet enters smart seat ring temperature mode, automatically adjusting seat ring temperature based on indoor temperature. Press the seat temperature button on the remote control to exit this mode. Long press the button or reconnect power to re-enter smart seat ring temperature mode.

User 1 and user 2 shortcut settings

Long press the User 1 or User 2 button on the remote control for 3 seconds to save current settings (nozzle position, water pressure, water temperature, seat temperature, drying temperature). When in use, press User 1 or User 2 to apply these preset settings.

Foam Shield

Manual Activation: Press the "Foam Shield" button on the remote control to activate foam shield manually. Foam dispenses once.

Automatic Activation: Foam is automatically generated once you are seated. Press and hold the "Foam Shield" button on the remote control for 3 seconds to turn the automatic foam function on or off.

Cleaning and Maintenance

Clean and maintain power plug

Clean the power plug regularly. When cleaning, remove the power plug from the socket and wipe it with a dry cloth. Dust accumulated on the power plug may cause fire.

Clean and maintain the main engine part of intelligent toilet

When cleaning the surface, wipe with a soft wet cloth. Pull the power plug out of the socket to avoid contact with water. For stubborn spots, use a soft wet cloth with neutral kitchen detergent.

Clean and maintain the ceramic part of intelligent toilet

Use a neutral toilet cleaner with a soft brush or sponge and rinse with tap water. Do not use detergents or disinfectants containing chlorine or acidity. Do not use brushes with abrasive materials.

Cleaning and maintain of nozzle

In normal operating status, press the nozzle cleaning button on the remote control. The nozzle will extend and auto-clean. You can use a toothbrush to clean it simultaneously. Do not stretch the nozzle by force.

Moisture condensation

Due to temperature and humidity differences, moisture condensation may occur on the ceramic pan and seat cover. Ensure complete air circulation in the bathroom. In case of condensation, use a dry cloth to scrub.

Change the batteries in remote control

• Change batteries when the remote control is insensitive or the indicator does not work.
• Do not mistake the positive and negative poles when installing batteries.
• Do not mix different types of batteries.
• Please remove the battery if not using for a long time.

FAQ

Some problems can be fixed by simple operation. Please confirm the following items before entrusting service.

Function List

Remarks: Indicates this product contains the function; blank indicates no function. The function of different items may be different from the above list; detailed function is in accordance with the actual product.

Product Specification

Acceptance Record

After installation, please try to operate the toilet and write down the result below.

Shop: ____________________ Installers: ____________________ Checking personnel: ____________________ Date: ____________________

Detachable nozzle model cleaning method

1. Press the button of self-cleaning on the remote control to extend the nozzle.
2. After the nozzle is extended, pull out the front nozzle by hand.
3. Use a toothbrush to clean the nozzle.

Cleaning and maintain of water inlet filter

1. Shut off the inlet valve first to stop water supplying.
2. Use a coin to open the filter counterclockwise, then clean it by brush or water directly.
3. Reinstall the filter and screw up. Do not leave behind the seal ring of the filter.
4. Open the inlet valve to check for leakage. If there is any leakage, please recheck and reinstall.

Not to use for a long time

When not using this product for a long time, please follow these operations: drain out all the water in the smart toilet to prevent water pollution or freezing; shut off the power; take out the batteries from the remote control.

1. Shut off the inlet valve first, stop supplying water.
2. Pull off the plug from the power socket.
3. Remove the inlet pipe from the inlet valve to drain out the water inside the pipe and the pipe.

When reusing the product, you can just open the inlet valve, plug the power cord into the socket, and start up.

Frozen

In winter, the intelligent toilet may be damaged by freezing. To prevent freezing, please keep the power on and operate as follows:

• Set the temperature of the seat and water to the highest level.
• In case the inlet pipe is frozen, the nozzle may not work. Use a warm cloth to heat the inlet valve or open the heating to fix this problem.