Bazyths ZY760A User Guide

Catalogue

• Panel Cognition
• Remote Control Panel
• Remote Control Match Code Instruction
• Knob Button (with Halo)
• Host Display Screen
• Ambient Light
• How to Use
• When sitting on the seat
• Start Rear cleansing or Front cleansing Function
• When unseated on the seat
• Function Setup and Adjustment
• Auto-open the seat cover
• Lid/Seat Ring Open
• Aperient
• Rear cleansing
• Front cleansing
• Water Pressure Adjustment
• Nozzle Position Adjustment
• Water Temperature Adjustment
• Hot/Cold Massage
• Drying Function
• Dryer Temperature Adjustment
• Seat Ring Temperature Adjustment
• Night Light
• Nozzle Cleaning
• Power Button
• Flush by the Remote Control
• Flushing Manually
• Flush by Foot Sensor
• Smart power-saving mode
• Flushing when Power Off
• Smart Seat Ring Temperature
• User 1 and user2 Shortcut Settings
• Cleaning and Maintenance
• Clean and Maintain the Power Plug
• Clean and Maintain the Main Unit of the Smart Toilet
• Clean and Maintain the Ceramic Part of the Smart Toilet
• Moisture condensation
• Change the batteries in remote control

Panel Cognition

The smart toilet can be operated primarily by the remote control, with assistance from the host operate panel.

Remote control panel

The remote control panel features buttons for: Stop, Rear, Front, Dryer, and Water Temp.

Front Panel Components

The front panel includes indicators for Auto-lid, Smart Self-clean, Temp, Seat Temp +, Seat Temp -, <, >, Flushing, Foam shield, Night light, Position, Massage, Moving, User 1, User 2, Seat ring/Cover up, and Seat cover closed.

Remote control match code instruction

1. Press the "Front cleansing" and "Dryer" buttons on the remote control while powering on. The indicator light will flash to enter match mode.
2. Cut off and re-power the power plug. The knob indicator light flashes twice. Then press the "stop" button on the remote control. The knob light will turn blue to indicate successful matching.
3. The knob indicator light will return to normal display, indicating successful matching. Wait for the host reset to complete.

Knob button (with halo)

The knob can be pressed to switch between flushing and stop functions.

• Vertically pressing the knob will flush the smart toilet once when it is not working.
• When seated, rotating the knob clockwise activates the rear cleansing function. Rotating anticlockwise activates the front cleansing function. Vertically pressing the knob stops functions like rear cleansing, front cleansing, or drying.
• When rear or front cleansing is active, rotating the knob once in the same direction activates the drying function.

Host display screen

The host display screen shows icons for power, temperature levels, air temperature, seat temperature, and water temperature. The displayed temperature cycles through water, seat, and air temperature every 30 seconds. The screen turns off automatically about 30 seconds after the user leaves the sensor area.

Ambient light

The smart toilet has a default ambient light mode (mode 1) that turns on when a person is close and turns off when the seat cover is closed for over 30 seconds. The night light function can be turned on/off by long-pressing the night light button on the remote control. The atmosphere light mode can be switched by pressing the "Position" button on the remote control within 5 seconds of the light being on. The display will show the mode number (1-64). Pressing the "Stop" button exits the mode setting.

How to Use

When seated on the seat

• When you hear "di", all functions start up.
• The nozzle auto-cleans once.

Start rear cleansing or front cleansing function

A diagram shows the cleaning nozzle and seat ring.

• Start rear or front cleaning using the remote control.
• Adjust cleaning position and water pressure using the remote control.
• Start drying function using the remote control.
• Pressing the "Stop" button stops rear cleaning, front cleaning, or drying.

When unseated on the seat

• The toilet auto-flushes once.

Function Setup and Adjustment

Auto-open the seat cover

The lid will auto-open when you get close to the toilet. This function can be turned on/off via the remote control.

Lid/Seat open

The toilet features automatic lid and seat opening activated by a foot sensor. When people approach, the lid and seat ring open automatically.

• Press the "Cover Up/Seat Up" button on the remote control to open or close the lid and seat.
• By foot sensor: When unseated and the seat cover/ring are in the low position, a single foot sensor activation opens the seat cover. When the seat cover is high and the seat ring is low, a single foot sensor activation opens the seat ring. When both are high, a single foot sensor activation closes the seat cover and seat ring, and the toilet flushes once. Note: If the last operation was flushing, it will not flush again upon closing the seat cover.
• By remote control: When unseated, press the "open seat cover and seat ring" button to open or close them. Pressing the "close seat cover" button closes them and flushes the toilet once. Note: If the last operation was flushing, it will not flush again upon closing the seat cover.
• The seat cover and seat ring open/close function cannot be used while the smart toilet is performing rear cleansing, front cleansing, flushing, or other functions.

Rear cleansing

This function uses a single hole nozzle for rear cleansing. Pressing the designated button on the remote control initiates rear cleansing, with the nozzle moving back and forth. Pressing a different button on the remote control switches to a fixed cleansing mode where the nozzle stops moving. This can be operated circularly.

• The rear cleansing function automatically stops after 90 seconds. Other function buttons can be used to switch to different functions, or the stop button can be pressed to end it within 90 seconds.
• The nozzle auto-cleans before and after rear cleansing.

Front cleansing

This function uses a feminine hole nozzle for gentle cleansing. Pressing the designated button on the remote control initiates front cleansing, with the nozzle moving back and forth for a gentle experience. Pressing another button on the remote control switches to a fixed cleansing mode where the nozzle stops moving. This can be operated circularly.

• The front cleansing function automatically stops after 90 seconds. Other functions can be selected, or the stop button can be pressed to end it within 90 seconds.
• The nozzle auto-cleans before and after front cleansing.

Water pressure adjustment

While in rear or front cleansing mode, pressing the rear or front cleansing button again on the remote control adjusts the water pressure strength. There are 4 levels of water pressure available.

Nozzle position adjustment

While in rear or front cleansing mode, pressing the designated button moves the nozzle back and forth to adjust the cleansing position. There are 5 levels of nozzle position available. Pressing another button starts this function and adjusts the cleansing position.

Water temperature adjustment

Pressing the designated button on the remote control will trigger a "di" sound, entering the water temperature adjustment state. Adjust the temperature for a comfortable cleansing experience. There are 4 levels of water temperature: normal, high, medium, and low. The water temperature level changes with each press of the button.

More Functions

Hot and cold massage

Pressing the designated button on the remote control starts the H/C massage mode. The water temperature alternates between cold and hot, transitioning from normal to the set level. If the set level is normal, it alternates between normal and low levels.

Drying function

Pressing the designated button on the remote control dries wet body parts. The drying function automatically stops after 3 minutes. Other functions can be selected, or the stop button can be pressed to end it within 3 minutes.

Drying temperature adjustment

Pressing the designated button on the remote control will trigger a "di" sound, entering the drying temperature adjustment state. Adjust to the desired drying temperature. There are 4 levels of drying temperature: normal, high, medium, and low. The drying temperature level changes with each press of the button.

Seat ring temperature adjustment

Pressing the designated button on the remote control will trigger a "di" sound, entering the seat ring temperature setting state. Adjust to the desired seat ring temperature. There are 4 levels of seat ring temperature: normal, high, medium, and low. The seat ring temperature level changes with each press of the button.

Night light

This product is equipped with a lighting function for nighttime use. Pressing the designated button turns the night light on/off.

Additional Features

Nozzle cleaning

Pressing the designated button on the remote control activates water flow for nozzle cleaning. This function is only available when unseated. The nozzle cleaning function will turn off after 90 seconds. Pressing the stop button on the remote control finishes the cleaning.

Power button

Long pressing the designated button on the remote control shuts down the host system.

Flushing by remote control

Pressing the designated button on the remote control flushes the toilet once. If flushing is initiated during a cleansing function, the cleansing will stop.

Flushing manually

Press the flushing rotary knob vertically to flush the toilet once. This function works even if the host system is shut down. If flushing is initiated during a cleansing function, the cleansing will stop.

Flushing by foot sensor

Designed for men, this feature allows flushing without bending. The smart toilet uses capacitive induction technology. Lightly touching the ceramic sensor area with your foot will initiate flushing automatically after your foot is removed.

Smart power-saving mode

When this mode is activated, the host system enters power-saving mode. Upon product use, it immediately returns to normal mode, and the seat ring heats to the set temperature. Long pressing the designated button on the remote control turns the smart power-saving mode on or off. The smart toilet remembers the last operation when powered off. When starting the mode, the knob light flashes for 10 seconds; when closing it, it flashes 4 times. In smart power-saving mode, the seat ring stops heating when unseated and automatically heats to the set temperature level or the smart seat temperature level when seated.

Flushing when power off

When the power is off, long press the side rotary knob for 3 seconds to start the flushing function.

Smart seat ring temperature

When connected to power, the toilet enters smart seat ring temperature mode, automatically adjusting the seat ring temperature based on indoor temperature. Pressing the designated button on the remote control deactivates this mode. Long pressing the button or reconnecting the power re-enters the smart seat ring temperature mode.

User 1 and user 2 shortcut settings

Long press the User 1 or User 2 button on the remote control for 3 seconds to save the current settings (nozzle position, water pressure, water temperature, seat temperature, and drying temperature). When using these settings, press the User 1 or User 2 button to apply the preset configurations.

Cleaning and Maintenance

Clean and maintain power plug

Regularly clean the power plug. When cleaning, unplug it from the socket and wipe with a dry cloth. Accumulated dust on the power plug can cause a fire.

Clean and maintain the main engine part of intelligent toilet

Wipe the surface of the main engine with a soft wet cloth. When cleaning, unplug the power to avoid contact with water. For stubborn stains, use a soft wet cloth with a neutral kitchen detergent.

Clean and maintain the ceramic part of intelligent toilet

Use a neutral toilet cleaner with a soft brush or sponge and rinse with tap water. Do not use detergents or disinfectors containing chlorine or acidity. Do not use brushes with abrasive materials.

Cleaning and maintain of nozzle

A diagram shows cleaning the nozzle with a brush and detergent.

Moisture condensation

Due to differences in indoor and ceramic pan/seat cover temperature and humidity, moisture condensation may occur. Ensure complete air circulation in the bathroom to prevent this. In case of condensation, use a dry cloth to wipe.

Change the batteries in remote control

Replace batteries when the remote control becomes insensitive or the indicator does not work. Ensure correct polarity when installing batteries. Do not mix different battery types. Remove batteries if the remote control will not be used for an extended period.