Sprout Closed Back Infant Shelf
Assembly Instructions
Fostering Exploration & Independence
We're Here to Help
Please reach out to our support team if you need any assistance along the way!
Phone: +1 (833) 530-0033
Hours: Monday-Friday, 8 AM - 4 PM MST
Email: support@sprout-kids.com
Included Parts
| Identifier | Description | Quantity |
|---|---|---|
| A | Sides | 2 |
| B | Shelves | 2 |
| C | Back | 1 |
Diagrams in the original document illustrate the shape of each part.
Assembly Steps
-
Step 1: Attach Shelves to Side
Insert the tabs of Shelves (B) into the corresponding slots on Side (A). Refer to the diagram for correct tab orientation. Apply gentle force to partially secure the parts.
Important Note: Ensure the "Groove" on the part faces the "Notch" on the slot. Push the tab into the slot until it clicks or "pops" into place. Apply firm force on the part to secure it.
-
Step 2: Attach Back Panel to Side
Insert the tabs of the Back panel (C) into the rectangular slots on Side (A), as shown in the diagram.
-
Step 3: Attach Second Side
Align and attach the second Side panel (A) onto the exposed tabs of Shelves (B) and the Back panel (C).
-
Step 4: Secure the Unit
Carefully tip the partially assembled unit so that the Back panel (C) rests against the floor. Apply force on the Shelves (B) to lock all parts securely into place. The parts should be flush with each other when fully locked.
Diagrams in the original document illustrate the orientation and connection points for each step. Arrows indicate where to apply force for securing parts.
