Sprout Maverick Hybrid

About Sprout

Sprout is an Australian brand that develops technology accessories to enhance your world, now and into the future. From maximising your productivity at work and while you study to enriching your downtime and recreational activities, Sprout develops accessories that add value to your way of life.

Content

• 01. What's in the Box?
• 02. Product Overview
• 03. Quick Start Guide
• 04. Extra Controls
• 05. Specifications
• 06. Important Safety Information
• 07. Consumer Guarantee

01. What's in the Box?

Thank you for choosing our Maverick Hybrid 3-in-1 Bluetooth Speaker, Wireless Charger and Powerbank. For optimum performance and safety, please read instructions carefully before usage. Please keep this manual for future reference.

• 1x Maverick Hybrid
• 1x USB Type-A to USB Type-C charging cable
• 1x Product manual

02. Product Overview

The Maverick Hybrid features the following components:

• 1. Wireless charging pad
• 2. LED indicator
• 3. Battery LED indicator
• 4. USB-C input/output
• 5. USB-A output
• 6. Microphone
• 7. UNISYNC button
• 8. Power button
• 9. Play/pause/answer

Diagram Description: The diagram shows the top and bottom views of the Maverick Hybrid device, with numbered callouts indicating the different components.

03. Quick Start Guide

Charging Maverick Hybrid

Important note: Charging the Maverick Hybrid requires the use of a standard AC wall charger. The Maverick Hybrid is supplied with a USB-A to USB-C charging cable, but does not include a wall charger.

1. Connect the USB Type-C cable into the Maverick Hybrid Speaker's USB Type-C port and connect the other end of the cable into a power source*.
2. White LEDs indicate the level of charge**.

*Power source options include USB connection to a Sprout AC power adapter, a Sprout car charger, or computer/notebook USB connection.

**Full charge will take approximately 4 hours. Please refer to the LED indicator section in this product manual.

Power Modes

Battery Level

Press the power button once to see the battery level. The Battery LED indicator will turn off automatically after 30 seconds when there is no power input/output.

The speaker will announce “Low Battery” when the battery level reaches 10%. At this point, wireless charging and USB charging will be disabled. They will remain disabled until the battery is completely drained, or the Maverick Hybrid is plugged in to charge.

USB Charging Output

Maverick Hybrid can connect and recharge a variety of devices using its 10050mAh internal battery. Simply connect your devices' USB Type-C or USB Type-A cable into the available USB ports.

Wireless Charging

Press the power button once to turn on the powerbank, then place the phone vertically on the wireless charging symbol. Maverick Hybrid's wireless charging pad conveniently recharges your Qi-compatible devices, with an efficient power output of up to 10W. To operate, place a Qi-certified phone (transmitter side) on the Maverick Hybrid.

Diagram Description: A diagram illustrates placing a smartphone onto the wireless charging pad of the Maverick Hybrid.

Bluetooth Pairing

1. Press the power button for approximately three seconds. The Maverick Hybrid's single LED will flash blue/red to indicate it is ready for pairing*.
2. Turn on Bluetooth on your mobile phone/music device**.
3. 'Maverick Hybrid' will appear on your mobile phone/music device. Select 'Maverick Hybrid' to pair.
4. Once your mobile phone/music device is connected to the Maverick Hybrid, you will hear 'Bluetooth connected'***.
5. Enjoy your music.

*If the single LED is not flashing red and blue, hold the UNISYNC button for 5 seconds to initiate Bluetooth pairing.

**If you are not familiar with Bluetooth pairing for your mobile phone or music device, refer to the user guide for your mobile phone/music device for instructions to pair a new device using Bluetooth.

***Maverick Hybrid will always store the last device paired, and if the device is within Bluetooth range, Maverick Hybrid will automatically connect to the device.

Play/Pause/Answer

Press the play/pause/answer button to play or pause songs and answer mobile phone calls.

04. Extra Controls

UNISYNC Mode

If you are using the UNISYNC feature, you can connect your Maverick Hybrid as a primary, then connect up to 50 UNISYNC devices with replicas.

To connect to another UNISYNC compatible speaker, short press the UNISYNC button on your primary device once to enter UNISYNC Mode. Once the primary announces it is in UNISYNC Mode, repeat on the other device. After the replica announces it is in UNISYNC Mode, press the UNISYNC button once more – the replica will announce it is using UNISYNC Audio. The primary speaker will show a solid blue light while replicas will show a flashing red and blue light.

Press the UNISYNC button again to disable UNISYNC.*

Press and hold the UNISYNC button for five seconds to reset the UNISYNC function.**

*If UNISYNC is disabled, Maverick Hybrid will disconnect from but remember the replicas connected to it.

**Resetting UNISYNC will enable Maverick Hybrid to 'forget' all replica devices.

LED Indicator

The single blue LED indicator will flash when Maverick Hybrid is switched on. When it is flashing red and blue LED light, the Maverick Hybrid is in pairing mode.

The battery LED indicator will flash from one to four LEDs to indicate Maverick Hybrid is charging. The lights will stop flashing once Maverick Hybrid is fully charged.

• 4 white lights on: Battery 100%
• 3 white lights on: Battery 75%
• 2 white lights on: Battery 50%
• 1 white light on: Battery requires recharge

05. Specifications

• Unit size: 190 x 79 x 31 mm (L x W x H)
• Weight: 400g
• Speaker: Total 10W
• Frequency range: 20Hz - 22kHz
• Power source: 3.7V 10050mAh lithium battery
• Playtime: 20 hours from full charge at 50% volume level
• Charging time: Approximately 4 hours (PD 3.0 fast charging)
• Bluetooth: V5.1
• Operating temperature: 0°C to 40°C
• USB Type-C charging input: 5V/3A, 9V/2A
• USB Type-C charging output: 5V/2A
• USB Type-A 2.0 output: 5V/2A
• Wireless charging output: 10W (max)

06. Important Safety Information

1. Keep Maverick Hybrid dry. Never place Maverick Hybrid in water.
2. Do not store Maverick Hybrid in very hot or cold areas. It is recommended that you use your Maverick Hybrid at room temperature only.
3. Do not open to modify, repair, or remove any original componentry of the Maverick Hybrid. A qualified technician must carry out repair work.
4. Do not remove the built-in battery.
5. Do not put metal objects or magnets between the mobile device and the wireless charging surface.
6. Stop using Maverick Hybrid immediately if it bulges, leaks, or smells, and contact the Manufacturer for service.

Safety Symbols Description: The document displays four icons: a crossed-out flame (indicating do not expose to fire), a hand with a circuit board (indicating do not disassemble), a screwdriver (indicating do not repair), and a crossed-out battery symbol (indicating do not dispose of with regular waste).

07. Consumer Guarantee

Our Goods come with consumer guarantees under Australia Consumer Law. Under this legislation, you are entitled to a replacement or refund for a major failure, and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if they are not of acceptable quality and the failure is not a major failure. If you have any questions about your rights in relation to this product, please return it to the point of sale or contact Sprout Accessories Pty Ltd at www.sproutinc.com.au.

For more information about your rights under Australia Consumer Law, go to www.accc.gov.au.

Your Maverick Hybrid Speaker is warranted to the original owner for 24 months from the date of purchase against defects in material and workmanship under normal use and service. The warranty does not cover misuse of this product, and liability will not exceed the purchase price of the product. If you have any problems while using the product, please do not hesitate to contact our customer support team.

For warranty and technical support, please visit sproutinc.com.au or email sproutenquiries@sproutinc.com.au.

Thank you for choosing a Sprout product.