Fisher & Paykel Optiflow+ Tracheostomy Interface Fitting Guide
CPAPMAN.COM - BEST SERVICE SINCE 1997
Optiflow+ Tracheostomy Interface
This guide provides instructions for fitting the F&P Optiflow+ Tracheostomy Interface.
Fitting Steps
Step 1: Securing the Lanyard
To ensure loading and movement on the tracheostomy tube is kept to a minimum, make sure the lanyard is secured properly.
Diagram 1a: Lanyard position as shown in 1a is not suitable for patients with damaged skin.
Diagram 1b: Proper lanyard securing.
Step 2: Connecting to Humidification System
Connect to the humidification system. Make sure all connections are secure.
Connection to F&P AIRVO and F&P 850 System.
Diagram 2: If using an MR850, attach the tubing clip to the breathing circuit but ensure probe cable is not crushed by tubing clip.
[OK symbol] indicates a secure connection.
Step 3: Orientating the Sputum Guard
Orientate the sputum guard so that sputum drains downwards. The sputum guard can be removed if required.
Important Information
IMPORTANT: Always refer to the user instructions supplied with the product for full set up instructions, warnings, cautions and contraindications.