Installation Product Manual

Important Information

Please read the entire manual before starting to assemble and/or using this product. Follow the manual thoroughly and keep it for further reference.

Assembly Guidelines

Avoid Scratches

To avoid scratching, this furniture should be assembled on a soft layer, such as a rug.

Improve Efficiency

To speed up the installation and shorten the time, try to find a partner to install with you.

Anti-Topple Warning

Overturned furniture can cause serious or fatal crush injuries. To prevent tipping over, be sure to use the anti-tip device provided. If not included with this product, please purchase a suitable wall attachment. If unsure, seek professional advice. Please read and follow each step of the instructions carefully.

Important Maintenance

It is important that any product assembled using screws is re-tightened 2 weeks after assembly, and then every 3 months to ensure stability throughout the product's lifespan.

For regular maintenance and cleaning of the frame, use a rag dipped in neutral detergent, wipe thoroughly, and then dry with a clean rag. For glass materials, wipe with a rag dampened with glass cleaner and then dry with a dry rag.

Do not use an electric screwdriver or excessive force when installing, as the board can easily break.

Tools Required

Please prepare the following tools:

When installing, carefully confirm that each screw corresponds to the manual. Accessories with similar shapes can be distinguished by size.

Parts List and Assembly Steps

Step 1

Fix slide rail (R) and rail (Q) to board 6 and 8 with screw (D) as shown.

Step 2

Fix slide rail (R) and (Q) to board 3 and 4 with screw (D) as shown.

Step 3

Fix rail (R) to board 7 with screw (D). Flip the boards to the back, and fix rail (Q) as well.

Step 4

Screw eccentric rod (A) into board 2 as shown. Insert wooden dowel (P) into board 2. Fix board 5 to board 2 with screw (N) as shown.

Step 5

Fix board 7 to board 2 with screw (O) as shown.

Step 6

Fix board 11 to board 7 with screw (N) as shown.

Step 7

Fix board 8 and 6 to board 11 with screw (N) as shown.

Step 8

Embed board 9 and 12 into the slots first. Fix board 9 to board 8 with screw (N) as shown.

Step 9

Attach board 10 and 28 to board 2. Add cam lock (C) into holes in board 10 and 28 and turn clockwise to tighten. Fix board 10 to board 8 and board 28 to board 6 with screw (N) as shown.

Step 10

Attach board 3 to board 9, 11, and 12. Add cam lock (C) and turn clockwise to tighten as shown.

Step 11

Attach board 4 to board 9, 11, and 12. Add cam lock (C) and turn clockwise to tighten as shown.

Step 12

Fix board 3 and 4 to board 2 with screw (O) as shown.

Step 13

Insert back boards 29 and 30 along the available grooves as shown.

Step 14

Screw eccentric rod (A) into board 1 as shown. Fix board 5 to board 1 with screw (N) as shown.

Step 15

Cover board 1 with the top. Add cam lock (C) into boards 3, 10, 28, 6, and 4, and turn clockwise to tighten as shown.

Step 16

Fix board 15 to boards 13, 22, and 23 with screw (F) as shown. Insert bottom board 17 along grooves.

Step 17

Screw eccentric rod (A) into board 19 first.

Step 18

Attach board 13 and 23 to board 19. Add cam lock (C) and turn clockwise to tighten. Fix knob (G) to board 19 with screw (H) as shown.

Step 19

Fix runner (S) and (T) to board 13 and 23 with screw (D) as shown.

Step 20

Fix board 24 to board 13 and 23 with screw (F). Insert bottom board 26 along the groove. Fix board 25 to board 13 and 23 with screw (F). Insert bottom board 27 along the groove.

Step 21

Screw eccentric rod (A) into boards 20 and 21 first.

Step 22

Attach boards 13 and 23 to board 21 respectively. Add cam lock (C) and turn clockwise to tighten. Fix knob (G) to board 21 with screw (H) as shown.

Step 23

Attach boards 13 and 23 to board 20 respectively. Add cam lock (C) and turn clockwise to tighten. Fix knob (G) to board 20 with screw (H) as shown.

Step 24

Fix runner (S) and (T) to board 13 and 23 with screw (D) as shown.

Step 25

Align rails and slide all drawers in.

Step 26

Insert buckle (L) into back slots and fix to tighten as shown.

Step 27

Install anti-tipping device as shown.

Warranty Information

Warranty Claims

• There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty starts from the date of purchase, verified by proof of purchase.
• Before making a claim, please call with your purchase order number and details of the problem. A replacement part will be arranged within 48 hours. If out of stock, a shipping date will be provided.
• The product must be used according to the provided instructions for health reasons.
• For other reasons, if the furniture needs to be returned, it must be cleaned and dried and operated within 30 days of receipt.

Type of Warranty Claim

• Failure to follow furniture instructions will invalidate the warranty.
• Damage during installation is not covered, but damage during transportation is.

Scope of Responsibility

• The manufacturer is not responsible for misuse, user damage, or loss of parts during installation.
• Damage and scratches after use are not covered by the warranty.

Warranty Coverage Areas

• Sheet parts: 1 month from the date of purchase.
• Electrical parts: 1 month from the date of purchase.

Returns

Changed Your Mind and Need to Return Your Item?

Please follow the retailer’s instructions for returns if you have simply changed your mind.

Defective Items

If your item is defective and you cannot identify why, please call first.

Damaged Items

If you receive an order with obvious shipping damage, refuse the delivery. If delivery is accepted and damage is found later, follow specific instructions from the retailer. Always save all packaging material and paperwork. Disposing of packaging or attempting to return merchandise without contacting the fulfiller may jeopardize your claim and credit.

After-Sales Contact

Email: adelahu@fufugaga.com

Phone: 208-820-0068