Installation Product Manual

Important Information

Please read the entire manual before starting to assemble and/or using this product. Follow the manual thoroughly and keep it for further reference.

Assembly Tips

• Avoid Scratches: Assemble the furniture on a soft layer, such as a rug, to prevent scratches.
• Improve Efficiency: Find a partner to install with you to speed up the process and shorten the time.

Anti-Topple Warning

Overturned furniture can cause serious or fatal crush injuries. To prevent tipping over, always use the provided anti-tip device. If not included, please purchase a suitable wall attachment. If unsure, seek professional advice. Read and follow each step of the instructions carefully.

Important: Re-tighten all screws 2 weeks after assembly and every 3 months to ensure stability throughout the product's lifespan.

Maintenance and Cleaning: For the frame, use a rag dipped in neutral detergent, wipe clean, and then dry with a clean rag. For glass materials, use a rag dampened with glass cleaner and then dry with a dry rag.

Do not use an electric screwdriver or excessive force during installation, as the board is easy to break.

Tools Required

Please prepare the following tools:

• Screwdriver (Phillips head)
• Hammer
• Drill

Parts List

When installing, please carefully confirm that each screw corresponds to the manual. Accessories with similar shapes can be distinguished by size.

• A x 14: M6 x 45 mm
• B x 2: M6 x 35 mm
• C x 2: Ø15 x 10 mm
• D x 26: M5 x 10 mm
• E x 4: M3 x 12 mm
• F x 4: M6 x 30 mm
• G x 2: M6 x 15 mm
• H x 20: M4 x 12 mm
• I x 8: M4 x 40 mm
• J x 5: M6 x 30 mm
• K x 10: M5 x 30 mm
• L x 2: M4 x 12 mm
• M x 8: M5 x 10 mm
• N x 2: M4 x 12 mm
• O x 1: M4 x 40 mm
• P x 2: Ø6 x 30 mm
• Q x 1: M4 x 12 mm

Assembly Steps

1. Step 1: Secure the fixing member to plate #3 with screws (D) and secure the fixing member (G) to plate (P) with screws (E) and spacers (R) as shown. The other plate #3 does not need to install any accessories. The magnet is directed towards the arrow.
2. Step 2: Connect plate #1/#2 with plate #3 using screw (A) as shown. Please do not tighten the screws yet.
3. Step 3: Fix plates #10/#9 to plate #7 using screw (H) as shown.
4. Step 4: Secure plate #7 to #3 with Screw A.
5. Step 5: Fasten two #4s to both #1 and #2 using Screw A. Please do not tighten the screws yet.
6. Step 6: Insert quickfit screw (B) into plate #11 as shown.
7. Step 7: Link #7 and #11 with #J, then secure them with #C.
8. Step 8: Connect plate #11 with the component (assembled in step 1) using screw (K) as shown. Slow down on the screws.
9. Step 9: Fix support leg (Q) to plate #12 using screw (H). Slow down on the screws.
10. Step 10: Attach plate #12 to the component using wooden dowel (J). Add nut (F) into plate #12, and fix plate #12 to plate #1 and #2 with screw (A). Please do not tighten the screws yet.
11. Step 11: Fix plate #12 to plate #7 with screw (I).
12. Step 12: Place plate #6 onto the assembled frame.
13. Step 13: Connect plate #5 to plate #6 using wooden dowel (J).
14. Step 14: Connect plate #5 and #6 to the item using screw (I).
15. Step 15: Put part (M) into part #1/#2, then place shelf plate #8 as shown.
16. Step 16: Install door #13 to the component using screw (D) as shown. If there is a discrepancy between the top and bottom of the two doors, please adjust upwards or downwards according to the diagrams. Please adjust the support leg to stabilize the product.
17. Step 17: After completing doors installation, tighten all screws (A).
18. Step 18: Fix plate #14 to the component using screw (D) and screw (H) as shown. Slow down on the screws.
19. Step 19: Open the package and get the LED strip. Clean the boards and keep them dry.
20. Step 20: Thread the strip through the bottom hole to the top as shown. Tear off the adhesive backing of the light strip, stick the strip to the bottom from the top cabinet as shown.
21. Step 21: Install anti-tipping device as shown.

Warranty Information

Warranty Claims: There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty starts from the date of purchase, verified by proof of purchase.

Before making a claim, please call with your purchase order number and details of the problem. We will respond within 48 hours. If a part is out of stock, we will reply with a shipping date.

The product must be used according to the provided instructions.

If the furniture needs to be returned for other reasons, it must be cleaned, dried, and returned within 30 days of receipt.

Type of Warranty Claim: Failure to follow the furniture instructions will invalidate the warranty. This includes damage during installation and transportation.

Scope of Responsibility: No responsibility will be borne for misuse, user damage, or loss of parts during installation. Damage and scratches after use are not covered by the warranty.

Warranty Coverage (US): Sheet parts: 1 month from the date of purchase. Electrical parts: 1 month from the date of purchase.

Returns

Changed Your Mind and Need to Return Your Item? Please follow the retailer's instructions for returns.

Defective Items: If your item is defective and you cannot identify why, please call us.

Damaged Items: If you receive an order with obvious shipping damage, refuse the delivery. If delivery is accepted and shipping damage is found later, follow the retailer's specific instructions.

In all circumstances, save all packaging material and paperwork for the order. Disposing of packaging or attempting to return merchandise without contacting the fulfiller may jeopardize your claim and you may not receive credit.

After-Sales Contact:

• Email: adelahu@fufugaga.com
• Phone: 208-820-0068