Smart Light Switch User Manual

Wiring for smart switch

* Please wire for the switch according to the diagram:

Diagram showing wiring with L (Live), N (Neutral), L1, L2, L3 (Loads) and bulbs connected. Tips indicate N: Neutral Wire, L: Live Wire, L1: Load 1, L2: Load 2, L3: Load 3.

Download & Registration

Scan the QR code to download "Smart Life" APP. You can also search "Smart Life" in either APP store or Google Play to install the APP.
Open the "Smart Life” APP, tap "Register" to register a "Smart Life" account with your phone number or E-mail. Then sign in the APP.

Image of a smartphone displaying the Smart Life app interface.

Add Devices in Easy Mode (Recommend)

Make sure your smart device is energized and your mobile phone is connected to your Wi-Fi network.
Long press any touch button for more than 3 seconds until the indicator light begins to flash quickly (2 times per second about), this means the device is already for configuration.
Open your "Smart Life" APP and tap "+" on the top right of the APP. Select Device Type, tap it and "Confirm indicator light rapidly blink". These will automatically fetch the password of the Wi-Fi network that your mobile phone connects to. Then tap "Confirm" to connect to the device.
When appears "Successfully added 1 device", it means the connection is complete and your device will be listed in your APP list.

Add Devices in AP Mode

If failed in Easy Mode, users could also add devices in AP Mode.
Long press any touch button for more than 5 seconds until the indicator light begins to flash quickly, then long press the power button for another 3 seconds until the indicator light begins to flash slowly, this means the device is already for configuration in the AP Mode.
Tap "+" on the top right of the APP. Select Device Type and tap it. Then select "AP Mode" on the top right of the APP. Tap “Confirm indicator light slowly blink" and "Confirm". Then tap "Connect now" to go to the WLAN Settings interface in your mobile phone and select the Wi-Fi network named "SmartLife_XXXX" to connect it.
Return to the "Smart Life" APP, the connection will start automatically.
When appears "Successfully added 1 device", it means the connection is complete and your device will be listed in your APP list.

Image showing the process of connecting to a device's hotspot within the Smart Life app.

Notices

Please check if there is damage caused by transportation, if yes, please contact supplier for replacement.
Please follow the specification instruction and notice to keep products in a good and safe use condition.
Do not disassemble or install the device otherwise there may cause security risks.
The smart switch need live wire and neutral wire for normal operation.

Link Smart Life account in Home Control

Attention: Due to the Google Home APP's known bug, you could use only one Google Home account to control "Home Control Action". If you sign in Google Home APP with several Google accounts, only the first Google account you signed in can be used for "Home Control".

Tap "Home Control" in the hamburger menu on the Google Home APP's Home Page, then tap "+".
Find "Smart Life" in the list. In the new window, select your Smart Life account region, type your Smart Life account and password, then tap "Link Now". After you assign rooms for devices, your devices will be listed in the Home Control page.

Image showing a list of compatible services with Google Home, including Smart Life.

Now you can control your smart device through Google Home. Take bedroom light as the example, the supported voice commands are as below:

OK Google, turn on/off bedroom light.
OK Google, set bedroom light to 50 percent.
OK Google, brighten/dim bedroom light.
OK Google, set bedroom light to red.

Works with Amazon Alexa

Preparation

Amazon Alexa APP and account
Smart Life APP and account
An Echo device, including Echo, Echo Dot and Echo Tap.
Smart device.

Sign in with Smart Life account, add the device, then change the name to a easily recognized word or phrase, like 'bedroom light'.

Set up Echo with Amazon Alexa APP

Sign in with Amazon account. Tap the Homepage on the top left, tap "Settings" and "Set up a new device". Then follow the instructions.

Select a Echo device, long press the dot button on the top of your Echo device until the orange light shows up and tap "Continue". Then select your Wi-Fi network and connect it to your device according to the instructions. This may take several minutes.

Enable our skill in Alexa APP

Tap the Homepage, select "Skills", then search "Smart Life". Select "Smart Life" and tap "Enable Skill" to enable the Smart Life Skill.
You will be redirected to the account link page. Type your Smart Life account and password, do not forget to select the country/region where your account belongs to. Then tap "Link Now" to link your Smart Life account. When "Alexa has been successfully linked with Smart Life" shows up, you can leave this page. (Note: If a Smart Life account has been linked before, you can use it directly, you can also tap "Disable Skills" to remove it.)

Control your smart device through Echo

Echo need to discover your smart device before the control.
You can say "Alexa, discover device" to Echo, or you can also tap "Discover Device" on APP to discover the smart devices. Discovered devices will be shown in the list. (Note: Every time you change the name of devices on Smart Life APP, Echo must re-discover devices before the control.)

Now you can control your smart devices through Echo. You can use following commands to control your devices(e.g.,bedroom light):

Alexa, turn on/off bedroom light.
Alexa, set bedroom light to 50 percent.
Alexa, brighten/dim bedroom light.
Alexa, set bedroom light to red.

You can also set up groups in Alexa APP. Tap "Create group", give your group a name like "my smart lights", select devices to add them in this group, then tap "Save". Now you can control your devices by group. If you say "Alexa turn on my smart lights", all the lights will be turned on.

Q & A

Why failed in adding device?

Make sure the device is powered on and close to your mobile phone when adding device.
Make sure your mobile phone is connected to the Wi-Fi network and your Wi-Fi router is working properly.
Make sure the device is ready for configuration. Please refer to the Product Instruction "Add Devices in Easy Mode" or "Add Devices in AP Mode" for details.
Make sure the connected devices have not reached the maximum number of Wi-Fi router. If not, please disconnect the network of some devices.
Make sure password of the Wi-Fi network is correct when adding new device.
Make sure you have selected 2.4GHz Wi-Fi network if you have a dual-band Wi-Fi router.
Make sure you have not used any Chinese Characters to name your Wi-Fi network.

Can I control device with 2G/3G/4G network?

When adding device for the first time, it requires that your mobile phone and device are connected to the same Wi-Fi network. After adding device successfully, you can remote control your device with 2G/3G/4G network.

How can I share my device with others?

Open you Smart Life APP, select your device and tap the button in the top right corner. Tap "Device Sharing" and "Add", then select the country/region where the account belongs to and input the account (a phone number or an E-mail address) you want to share with. (Please make sure the phone number or E-mail is registered.)
Open you Smart Life APP, tap "Profile" on the lower right corner of the APP. Select "Device Sharing" and add device you want to share with others, then select the country/region where the account belongs to and input the account (a phone number or an E-mail address) you want to share with. (Please make sure the phone number or E-mail is registered.)

How can I manage the device shared by others?

Open you Smart Life APP, tap "Profile" on the lower right corner of the APP. Tap "Device Sharing", you will find devices shared by others.

Specification

Working Voltage: AC100-240V (50/60Hz)
Max. Load:800W/Gang (Resistive load)
Max. Current: 10A
Wireless Frequency: WiFi 2.4GHz
WiFi Standard:802.11 b/g/n
Standby Consumption:0.1mA
Plastic Material:PC flame retardant

	Smart Plug User Manual - Setup, Connection, and Integration Guide This user manual provides comprehensive instructions for setting up and using your Smart Plug. Learn how to connect it to your Wi-Fi network, integrate it with Amazon Alexa and Google Home, and find solutions to common troubleshooting issues. Includes indicator light status and device sharing information.
	Smart Strip Light User Manual - Setup, Control, and Safety Information Comprehensive user manual for the Smart Strip Light, detailing installation steps, smart control via the Smart Life app, integration with Amazon Alexa and Google Assistant, product specifications, safety precautions, and warranty details.
	Smart LED Bulb User Manual: Setup, Alexa & Google Home Integration User manual for Shenzhen Sunyesmart's Smart LED Bulb (SD4015). Get step-by-step instructions on downloading the Smart Life app, connecting via Wi-Fi/BLE, and integrating with Amazon Alexa and Google Home for voice control.
	Smart Light Bulb User Manual and Amazon Echo Integration Guide Comprehensive user manual for Smart Light Bulbs, detailing setup and integration with Amazon Echo devices for voice control. Covers app installation, device pairing, and voice command usage.
	Smart Wake-Up Light Guide - ACA-003 2.0 Comprehensive guide for the Smart Wake-Up Light (Model ACA-003 2.0), covering setup, features like alarms, light functions, FM radio, fall asleep mode, and app integration with Smart Life, Amazon Alexa, and Google Home.
	Smart Wi-Fi+BLE Light Switch User Manual - Setup and Wiring Guide Comprehensive user manual for the Smart Wi-Fi+BLE Light Switch, covering installation, wiring diagrams (EU/US, with/without neutral), app setup with Smart Life, and FCC compliance information.
	Smart Curtain Switch User Manual - Setup, Wiring, and Integration Guide This user manual provides comprehensive instructions for the Smart Curtain Switch, covering wiring, app setup with Smart Life, and integration with Google Home and Amazon Alexa for smart home automation.
	WiFi Smart Devices Manual: Setup, Google Home & Alexa Integration Comprehensive user manual for WiFi smart devices, detailing app download, device setup via Easy Mode and AP Mode, integration with Google Home and Amazon Alexa, voice control commands, device sharing, and troubleshooting tips.