Water Jug Holder User Manual

Product Models

4 WATER BOTTLE RACK-S

4 WATER BOTTLE RACK-B

The product is a four-tier water jug holder. Two configurations are illustrated: 'Downtilt', where bottles are angled downwards, and 'Uptilt', where bottles are angled upwards.

Contact & Support

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves the right to interpret its user manual. The appearance of the product is subject to the product received. VEVOR will not provide further notice for technology or software updates.

Safety Instructions

WARNING:

Read this material before using this product. Failure to do so can result in serious injury.

Assembly Precautions:

1. Assemble only according to these instructions. Improper assembly can create hazards.
2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
3. Keep the assembly area clean and well-lit.
4. Keep bystanders out of the area during assembly.
5. Do not assemble if tired or when under the influence of alcohol, drugs, or medication.
6. The product capabilities apply to properly and completely assembled products only.
7. Assemble on a flat, level, hard, and smooth surface capable of safely supporting the Water Jug Holder.
8. For additional information regarding the parts, please refer to the Assembly Diagram. Unwrap and separate all parts in a clean work area.

Use Precautions:

1. DO NOT SIT OR STAND ON THIS ITEM.
2. This product is not a toy. Do not allow children to play with or near it.
3. Do not exceed specified weight capacities.
4. Use only on a flat, level, hard, and smooth surface that can safely support a fully loaded Water Jug Holder.
5. Use as intended only.
6. Inspect before every use; do not use if parts are loose or damaged.

SAVE THIS MANUAL

Parts List

Assembly Step

Two Installation Methods:

The product can be assembled in two main configurations: Downtilt or Uptilt.

Downtilt Configuration:

STEP 1: Attach shelves (C) to side frames (A) using screws (F) and the Allen wrench (G).

STEP 2: Assemble the remaining side frames (B, D) and attach the adjustable feet (E) to the base.

STEP 3: Complete the main frame structure by connecting the assembled sides.

STEP 4: Securely fasten the shelves (C) to the frame using screws (F) and the Allen wrench (G).

STEP 5: Drill holes in the wall according to specified distances and install the provided wall anchors (J).

STEP 6: Mount the unit to the wall using the wall bracket (H), wall screw (I), and washer (K).

Uptilt Configuration:

STEP 1: Attach shelves (C) to side frames (A) using screws (F) and the Allen wrench (G).

STEP 2: Assemble the remaining side frames (B, D) and attach the adjustable feet (E) to the base.

STEP 3: Complete the main frame structure by connecting the assembled sides.

STEP 4: Securely fasten the shelves (C) to the frame using screws (F) and the Allen wrench (G).

STEP 5: Drill holes in the wall according to specified distances and install the provided wall anchors (J).

STEP 6: Mount the unit to the wall using the wall bracket (H), wall screw (I), and washer (K).

Product Parameter

Manufacturer & Importers:

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREET EASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

EU Representative: E-CrossStu GmbH, Mainzer Landstr.69, 60329 Frankfurt am Main.

UK Representative: YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX