VEVOR WATER IONIZER MACHINE

Introduction

VEVOR is committed to providing tools with competitive prices. Expressions like "Save Half" or "Half Price" represent an estimate of savings compared to major top brands and may not cover all categories. Customers are advised to verify savings carefully when placing an order.

Need Help? Contact Us!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate: www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves the right to interpret its user manual. The appearance of the product is subject to the product you received. VEVOR will not provide further notice for technology or software updates.

Important Safeguards

• ⚠️ Warning: To reduce the risk of injury, user must read instructions manual carefully.
• ? Indoor Use only
• ?️? Correct Disposal: This product is subject to the provision of European Directive 2012/19/EC. The symbol showing a wheelie bin crossed through indicates that the product requires separate refuse collection in the European Union. This applies to the product and all accessories marked with this symbol. Products marked as such may not be discarded with normal domestic waste, but must be taken to a collection point for recycling electrical and electronic devices.

1. Read all instructions.
2. Check that the voltage indicated on the data plate corresponds with that of the local network before connecting the appliance to the mains power supply.
3. Do not leave the appliance unattended whilst connected to the mains power supply.
4. Do not immerse the appliance in water or any other liquids.
5. It is imperative to unplug the power cord after the appliance has been used, before it is cleaned and whilst being repaired.
6. Close supervision is required when using this appliance near children. Never leave the appliance within reach of children.
7. Repairs to electrical appliances should only be performed by a qualified electrician. Improper repairs may place the user at serious risk.
8. This appliance is intended for household use only and should not be used for commercial purposes.
9. Do not operate the appliance with a damaged plug or cord, after a malfunction, or after being dropped or damaged in any way.
10. Do not use the appliance for anything other than its intended use.
11. Do not touch hot surfaces, use handle or knobs when working with the unit.
12. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. Keep the appliance and its cord out of reach of children less than 8 years.
13. Type Y attachment: If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

FCC Information

CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment! This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This product may cause harmful interference. 2) This product must accept any interference received, including interference that may cause undesired operation.

WARNING: Changes or modifications to this product not expressly approved by the party, responsible for compliance could void the user's authority to operate the product.

This product has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This product generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this product does cause harmful interference to radio or television reception, which can be determined by turning the product off and on, the user is encouraged to try to correct the interference by one or more of the following measures.

• ?⬆️ Reorient or relocate the receiving antenna.
• ↔️ Increase the distance between the product and receiver.
• ?⚡ Connect the product to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for assistance.

Input Water Quality Requirements

• The input water quality should meet the local drinking water quality standard. If the water quality is not good, it may not only shorten the water ionizer's lifespan, but even may be harmful to your health.
• The input water flow rate should be over 0.8L/min, then it will drive the water flow sensor to start the water ionizer. If your water flow is less than 0.8L/min, the water ionizer can't be turned on to work. Then you may need a pump to help.

Do Not Damage the Power Cable and Plug

• Do not force to bend, twist or squeeze the power cable and plug.
• Do not drag the power cable.
• Do not put heavy weight on it.
• To avoid electric shock or catching fire, stop using the machine once damage is found on the power cable or plug. Please contact professionals to repair the damaged power cable and plug.
• Always insert the plug to the end. Stop using a damaged or loosened power plug. If not, it may cause electric shock or catch fire.
• Clean the dusts on the power plug pins regularly. Because if the dust contacts the water mist, there is a risk of electric shock or catching fire. Do not use volatile solvents to clean the machine. Clean it with soft cloth and detergent.

Do Not Install the Water Ionizer in the Places Below

• Near fire or high temperature (Over 60°C) place.
• Outdoors or exposing to the sun or rain.
• In steam or moisture place.
• Do Not disassemble, repair or modify the machine on your own. Please contact the distributor/seller or professionals for any question.

Technical Parameters and Specifications

Note: 1. The pH & ORP range, Filter usage life and Flow rate etc. are depending on your local water supply condition. The PH data is laboratory data; different regions are affected by TDS value, the data may be different, which is a normal phenomenon. When the heating function is working, the water temperature will be kept at about 35-55°C.

Method of Erection

1. Check The Accessories

Before installing the machine, please check if all the accessories are received. If any of them are missing, please contact the distributor/seller.

• Tap adapter A: Used to connect the machine to a faucet.
• Tap adapter B: An alternative adapter for connecting to different faucet types.
• Coiler: A flexible tube for water output.
• Tee assembly: A component for connecting water pipes.
• 1/4" PE pipe: A type of plastic tubing for water supply.
• 3/8" soft pipe: Another type of flexible tubing.
• Accessory bag: Contains various small parts and fittings.
• Power cord: For connecting the machine to the power supply.
• pH test reagent: Used with the pH color chart to test water pH.
• Filter wrench: Tool for installing or removing the filter.

Note: If there is any improvement, it will be clarified in this manual. The product's appearance, color changes, and specifications are subject to modification without notice.

2. Installation Environment

A. Install the machine in a place that will avoid direct sunshine and fire (at least 1 Meter away from heat sources).

B. This water ionizer uses AC120V or AC220-240V power supply. Please connect it to a separate power socket, away from other appliances such as microwave ovens. For safety, the ground wire is needed.

C. This water ionizer works with 0.1-0.3MPa water pressure. If your input water pressure is lower than 0.1MPa, please install a booster pump.

3. Installation Tools You May Need

• A. Cross Screwdriver
• B. Cutting Knife
• C. PTFE tape

4. Installation Diagram Overview

Detailed installation instructions are as follows:

Installing the hoses for the water

The diagram shows the water tap, mineral port, the water ionizer machine, and power input/output connections. Water flows from the tap, through an adapter, into the machine's "IN" port, and out through the "OUT" port and mineral port.

Cut the water hose into 2 pieces. Insert one hose into the IN outlet on the back of the unit and the other end should be inserted into the top insert on the adaptor. Repeat the process for the OUT outlet for the bottom insert. When getting ready to insert the other end of the hose into the adaptor, first insert the hollow bolt through the hose and screw the bolt into the adaptor as seen in the picture below.

The diagram shows an adapter with "Outlet" and "Inlet" ports. The top hose connects to the OUT nozzle behind the unit, and the bottom hose connects to the IN nozzle. The hoses are identical.

How to connect the adaptor to 2 common types of faucets

Type A: For faucets with external threads. Remove the outlet of the tap and fasten the adapter. If there are leaks, turn it slightly until the leak stops, ensuring the washer has been inserted before tightening.

Type B: For other faucet types. Fix the installation ring first. Use the internal ring set and affix to the tap. Tighten with a wrench. Finally, affix the separator.

2.4.2 Install 2-2 valves

Step 1: Drilling: Within 70mm of the edge of the sink, drill a through hole (diameter 14±2mm) on the counter surface with an electric drill. Note: Marble counter tops need to use a 14mm glass hole opener.

Step 2: Fix the 2-2 valve: Insert the 2-2 valve into the hole and fix it on the counter with a hex nut. The diagram shows the valve being secured with a decorative seat, hard rubber pad, and small soft rubber pad on the countertop. Another diagram shows the assembly with hardware fastener, big soft rubber, flat gasket, and hex nut.

Three-way ball valve installation

Close the household main water valve switch. Connect the three-way ball valve from the user's home water pipe, so that one end of the three-way ball valve is connected to the water inlet pipe, the other end is connected to the external water equipment pipe, and then connect the PE water pipe (1/4" water pipe) from the three-way ball valve outlet.

The diagram shows a PE pipe being connected to a fixing nut on a ball valve.

When connecting the PE pipe to the ball valve, insert the PE pipe into the fixing nut of the ball valve.

Diagrams illustrate the process: "Before connecting PE", "Connecting PE tube", "Complete connection".

After the PE tube is inserted into the ball valve fixing nut, pull out the PE tube with sufficient operating length, insert the PE tube into the fixing screw of the ball valve base, and then screw the fixing nut into the fixing screw and tighten it with a wrench to set the ball valve in the closed position. At this time, the three-way ball valve and PE pipe are installed and connected.

The diagram shows a quick connector with an arrow indicating how to release the PE tube.

Then insert the other end of the PE pipe into the 1/4" straight-through quick connector, and the other end of the quick connector is connected to the bottom interface of the faucet adapter B, and the under-counter part is installed.

NOTE: If you want to take out the PE tube in the quick connector, just press down the inner ring of the quick connector with one hand, and pull the PE tube outward with the other hand.

Installation of the water ionizer machine

Fix the water ionizer machine on the wall with a hanging kit.

The first step is to directly place the machine in a convenient and suitable position on the counter.

The second step is to measure the appropriate height above the sink (30-50cm above the sink is appropriate), take out the accessories in the accessory bag, take out the hanging plate to determine the machine hanging holes position.

If the installation environment is not convenient to drill holes, please use nail-free glue to fix the wall hanging plate. After determining the position of the wall hanging plate, evenly apply the nail-free glue to the fixing surface of the wall hanging plate, and then stick to the fixed position of the wall surface (complete the operation within 5 minutes to prevent glue from solidification). After fixing with nail-free glue, it is necessary to wait 24 hours after the glue is completely solidified before hanging the machine on the wall.

The third step is to use an electric drill to drill two holes with a vertical depth of about 50mm and a diameter of 6mm according to the drilling position, and the center distance of the two holes is 40mm.

Step 4: Insert the plastic expansion tube into the hole.

Step 5: Fix the metal hanging plate to the wall with stainless steel screws.

Step 6: Install the square metal hanging plate behind the water ionizer machine, and then hang it on the previously fixed hanging plate on the wall.

Step 7: Measure the distance from the adapter to the bottom of the machine, and cut off the appropriate length of the water inlet PE pipe and the drainage PE pipe.

Step 8: Take down the machine from the wall. Cut the 3/8" hose into 2 pieces with appropriate length. Connect the hoses to the IN and OUT nozzles at the bottom of the machine base.

Tap adapter A: Insert one end of the first 3/8" hose into the top water outlet of the tap adapter A and fix it tightly with a pipe clamp. Connect the other end to the water inlet at the IN nozzle of the machine base and fix it tightly with a pipe clamp. Insert one end of the second 3/8" hose into the bottom outlet of the tap adapter A and fix it tightly with a pipe clamp. Connect the other end to the OUT nozzle of the machine base and fix it tightly with a pipe clamp.

Tap adapter B: Insert one end of the first 3/8" hose into the bottom outlet of the tap adapter B and fix it tightly with a pipe clamp, and connect the other end to the water intake at the IN nozzle of the machine base and fix it tightly with a pipe clamp. Insert one end of the second 3/8" hose into the top outlet of the tap adapter B and fix it tightly with a pipe clamp. Connect the other end to the outlet of the machine base and fix it tightly with a pipe clamp.

Step 9: Install metal coiler

Screw the metal coiler clockwise into the outlet connector of the machine as showing in the picture below.

At this point, the water ionizer machine host is installed.

Plug in the power cord. First, make sure that the specifications of the power supply to be connected are consistent with the requirements of the nameplate, and then insert the power cord plug (one end is connected to the lower end of the machine, the other end is connected to the power supply). After the power cable is plugged in, the LCD and indicator light up. In daily use, the power cable plug can not be disconnected.

How to Connect the Adapter to the Faucet

Type A: This type of faucet is with external threads. After removing the outlet nozzle of the tap, connect the adapter to the tap and fasten the screw. Ensure the washer has been inserted before tightening.

Type B: Connect the black rubber part to the faucet. Remove the inside small rubber ring if necessary. Fasten the steel ring with the screwdriver. Then fix the adapter to the screw threads at the bottom of the black rubber part.

How to Connect the Hoses to the Adapter

• Insert the hoses through the hollow bolts first. Fix the hoses on the nozzles, then fasten the hollow bolts.

Product Main Features

This Multifunctional Water Ionizer can be used freely in different water quality and different standards of the power supplies.

• A large 4.2-inch colorful LCD screen display, displaying more information.
• The LCD displays pH and ORP, flow rate, temperature, filter usage life etc., helping the user to select suitable water.
• Elegant and solid CDC touch control panel, brief, clear, and easier to be used by children & elderly people.
• By using a high-power SMPS power supply, it is suitable for many different power supplies in the world, safe and reliable.
• The electrolysis with the Microcomputer automatic control system can work perfectly with water TDS from 50 to 1000PPM.
• It has a built-in water filtering system, showing the filter life span in time, to make sure the water quality is safe for both body health and machine life time.
• It has the self-cleaning function, to prevent scaling and maintain high performance.
• Japan imported stainless steel Spouts, never rust, free to be bent in any direction.
• 9pcs large size Titanium with Platinum coating plates, applied with Japan imported ionic membrane, providing higher efficiency electrolysis and longer working life.
• Built-in overheat protection system, prevents high temperature water from entering the machine, assuring the machine.
• It comes with 6 different water levels to meet different daily usages: Cooking, Coffee/Tea, Drinking, Purified water, Skin Washing, Sanitizing.
• It comes with the water flow rate controller which can turn on/off the water on the machine, more convenient than controlling by the kitchen faucet.

Controlling Panel Overview

The control panel features several icons for different functions:

• ? Home page.
• ⚙️ Setting button: Used for setting input water TDS, Filter life, Automatic cleaning tips, Time, Language, and Volume.
• ? Technician settings: Please operate following professional guidance.
• ? UV LED: When alkaline water levels are chosen, the UV light turns on automatically.
• ? Cleaning button: When output water quality reaches the set automatic cleaning quality, the indicator light turns on. When the machine is working, press the cleaning button to start the cleaning system.
• ? Heating button: Produces constant temperature hot water (less than 60 Celsius Degree). When heating, the red lights around the screen flash.
• ? Save button: Saves the settings.

LCD Display Introduction

The LCD screen displays various water levels and their properties:

Alkaline Water Level 3 (pH 9.5~11.2)

Suitable for cooking noodles, rice, soup, and making bread. Maintains the natural tastes of food materials. Speeds up the process of cooking and leaves vegetables fresh. Also used for washing vegetables and fruits to remove pesticide residue and eliminates odor of meat and fish.

Alkaline Water Level 2 (pH 8.5~10.0)

Removes bitterness and enhances the taste of tea and coffee. Acts as a strong antioxidant for removing free radicals from the body.

Alkaline Water Level 1 (pH 7.5~9.0)

Suitable for drinking and improving overall health. It is recommended to gradually increase daily consumption and adapt according to your personal preference.

Purifier Water Level (pH 6.8~7.0)

Suitable for infant formula preparation or taking medicine. It has no color, no taste, and no impurity.

Acidic Water Level 1 (pH 4.5~5.5)

Due to having a similar pH to the skin, it's suitable for washing both face and hair. Ideal for bathing sensitive skin and infants, sunburn relief. Good for brushing teeth to keep fresh breath. Restores shine to hair.

Acidic Water Level 2 (pH 2.5~4.5)

Used for sterilization and disinfection for cleansing kitchenware and tableware. Also used for soaking fruits and vegetables to remove agricultural chemicals.

How to Operate

Setting Filter Life

The unit arrives with 2 filters. It is important to set the filter life according to your water source quality and usage amount.

1. Press the Technician Settings Button ? to enter the Technician setting interface. Press Reset filter and confirm if new filter elements have already been installed. After confirmation, press the Home Page Button ? to return to default settings for filter lifespan.
2. To adjust the filters lifespan, press the Setting Button ⚙️ and adjust the Filter 1 and Filter 2 life from 1000L to 12000L, in accordance to your local input water quality.
3. Press the Save Button ? to save the settings.

Setting Auto Cleansing

The unit is designed to auto-clean every 60L, but you may wish to alter this based on your water source.

1. Press the Setting Button ⚙️ and set the Automatic Cleaning Tips from 30L, 60L to 90L. You need to press the Cleaning Button ? to complete the cleaning process manually.
2. The "EL" setting is for automatic cleaning every 60L. It will run the cleaning process automatically when you turn on the water and start the machine. You can adjust it in accordance to your local input water quality.
3. Press the Save Button ? to save the settings.

Setting the TDS (Total Dissolved Solids)

You can customize your TDS settings depending on the level of HARD or SOFT water from your water source. You may need a TDS meter if you don't know the hardness level of your water.

1. Press the Setting Button ⚙️ and set the TDS from 50 to 600 ppm. You can adjust it in accordance to your local input water quality.
2. Press the Save Button ? to save the settings.

Setting the Time and Date

1. Press the Setting Button ⚙️ and enter the time and date, then press the Confirm button ✔️.
2. Press the Save Button ? to save the settings.

Function Setting

Do not turn on the water tap when you are going to set the machine.

1. Water temperature setting: Press and hold the Drinking water button ? for 5 seconds to enter the temperature setting. Adjust the readings by pressing the Cleaning button ? to increase, and Heating button ? to decrease.
2. Time setting: Press and hold the Coffee / Tea water button ☕ for 5 seconds to enter the time setting. Adjust the readings by pressing the Cleaning button ? to increase, and Heating button ? to decrease. After setting up the hour, press the Coffee / Tea water button ☕ again to set up the minute. Press the Coffee / Tea water button ☕ to save the setting and exit to standby state.
3. pH level setting: Press and hold the Cooking water button ? for 5 seconds to enter the pH level setting. You can set up 1-2-3 for low, middle, and high electrolysis strength. Adjust the readings by pressing the Cleaning button ? to increase, and Heating button ? to decrease. Then press the Cooking water button ? to save the setting and exit to standby state.
4. Filter lifespan setting: Press and hold the Skin Washing water button ? for 5 seconds to enter the filter lifespan setting. The filter life setting range is 1000L to 9000L. Adjust the readings by pressing the Cleaning button ? to increase, and Heating button ? to decrease. Then press the Skin Washing water button ? to save the setting and exit to standby state. Note: When the filter lifespan is less than 100 Liters, the filter lifespan indicator will flash to remind replacing the filter.
5. Cleaning Setting: Press and hold the Skin Washing water button ? for 5 seconds to enter the filter lifespan setting, then continue to press Skin Washing water button ? for 3 times to enter the cleaning setting. Press Cleaning button ? to increase and Heating Button ? to decrease. You can choose from "30, 40, 50, 60, 70, 80, 90, EL" according to the input water quality. The numbers mean every time the water discharge capacity reaches the corresponding amount, the red cleaning light is on. You will need to press the cleaning button manually to start the cleaning program. If set to "EL", every time the water discharge capacity reaches 90L, the red cleaning light is on, and the automatic cleaning process will start next time as the water runs through. After setting, press Skin Washing water button ? to save the setting and exit to standby state on the Coffee / Tea water level. When cleaning program is running, music plays, red cleaning light flashes, and the LCD turns red. After 1 minute, the cleaning process will stop automatically and return to standby state in the default Coffee / Tea water level.

General Use & Instruction For Different pH Water

The Benefits Of Hydrogen In Alkaline Water

What is Hydrogen? - "The fuel of life."

Nobel Prize winner Albert Szent-Gyorgyi said in his 1937 Nobel Lecture, "A living cell requires energy not only for all its functions, but also for the maintenance of its structure" ... "bring out the fact that our body really only knows one fuel, hydrogen."

Hydrogen is the smallest and lightest antioxidant. Due to the free electrons and reactive nature of both atomic and molecular forms of hydrogen, it is considered one of the strongest antioxidants with a high reduction potential. Due to its small size, it also penetrates easily through cell membranes, to rejuvenate and repair our cells damaged by harmful Free Radicals.

Antioxidants prevent the oxidation of cells through chemical combination with free radicals. Oxidation damage is caused by harmful free radicals and is one of the main causes of diseases. Hydrogen is one of the best anti-oxidants that selectively eliminates harmful free radicals because of its applicable reducibility. It is hundreds of times more effective than anti-oxidants like Vitamin C. The advantage of Hydrogen is that it has no side-effects and can be used or consumed without limitations or restrictions. Hydrogen is an inner gas that scientists found the bacterium in our large intestine would produce hydrogen by fermentation.

Molecular Hydrogen is the smallest antioxidant known in the world.

The diagram illustrates the relative antioxidant power of various substances, showing Molecular Hydrogen (2) as a significant contributor compared to Vitamin C (176), Glutathione (309), Coenzyme Q10 (863), and Vitamin E (431).

The equation HH (Molecular Hydrogen) + OH (Hydroxyl Radical) = H2O illustrates how hydrogen neutralizes toxic free radicals.

H2 is extremely small and effective. It can reach into our cells and brain where most antioxidants are blocked, to effectively neutralize free radicals and prevent damage.

How is the Hydrogen-rich water working as an antioxidant?

The free radicals which are outside of the cells can be removed by polyphenols, Vitamin C, and Vitamin E. Free radicals inside the cells can only be removed by hydrogen-rich water. Hydrogen-rich water can penetrate the cell freely due to its smaller size, which is why our body needs it.

The water ionizer is designed to produce plenty of Hydrogen in the alkaline water as soon as water passes through. During the electrolysis process, hydrogen and oxygen are separated, and only hydrogen can pass through the ion membrane, enabling the dissolved hydrogen and electron concentration to be maximized.

Principle of Operation

The basic principle of the water ionizer is electrolysis of water to change the PH and Oxidation-Reduction Potential (ORP) to separate the hydrogen and the hydroxide ion.

In general, water cannot decompose into O2 and H2 in its natural state. However, according to Faraday's law of electrolysis, if a cathode and anode are added to water and the current is switched on, the water will be electrolyzed.

The anode materials are usually platinum or platinum; they are not easy to dissolve. The oxidation-reduction reaction of cathode and anode is as follows:

• 2H₂O + 2e⁻ = 2OH⁻ + H₂ (Alkaline electrolytic water with reductive, E₀=0-0.0591pH)
• H₂O = 2H⁺ + ½O₂ + 2e⁻ (Acidic electrolytic water with oxidative, E₀=1.228-0.0591pH)

After hydrogen and oxygen are produced on the surface of the cathode and anode, the water around the electrodes becomes alkaline and acidic, and the ORP changes. The porous semipermeable membrane, or the semipermeable membrane that cation-anions can selectively pass through, is inserted between the two poles to limit the water. Acidic water with high concentration and oxidative properties will be collected from the positive pole, and alkaline water with high concentration and reductive properties will be collected from the negative pole. This is the operation principle of the water ionizer.

Precautions For Use

Before using this water ionizer, please read these precautions carefully. Please operate this water ionizer following the precautions to avoid damage to the machine or your health.

• City or municipal water is recommended. Well water or ground water which contains impurities, chemicals, and heavy metals is not recommended.
• Please replace the water filters timely to assure the water quality is good for your health and the machine's lifespan.
• Do not connect it with a water heater. Make sure the inlet water temperature is below 113°F (45°C). Keep the machine away from high temperatures and direct sunlight.
• Do not use water to rinse the machine directly, and do not use alcohol or other volatile solvents to wipe it. Please use a soft cloth with soapy water to wipe it gently.
• Do not use aluminum or copper containers for the alkaline or acidity water, as the water could be contaminated by these types of containers.
• Do not disassemble the machine & components. Do not block, fold, or break the outlet tube. When the machine is working, for the purpose of expelling water freely, do not keep the drain water outlet tube in a high place. The drain water tube should be no more than 60cm in length.
• Every morning before collecting alkaline water from the ionizer, allow the water to run for 10~30 seconds to flush out the water in the machine and filters. At the end of the day, it is suggested to flush for 10-15 seconds in the "Purified water" level and "Sanitizing" water level to prevent scaling.
• The ionized alkaline & acidic water should be used as soon as possible, within 24 hours.
• Do not take medicine with alkaline water. Please use purified water.
• Do not drink acidic water.
• Please disconnect the power plug when not using the machine for a long period.

Troubleshooting

Issue 1: The power supply light is not on or LCD screen does not display.

Solution: Please check if the electricity power supply is connected properly and re-plug the cord.

Issue 2: Touch control panel does not function or respond (but the machine can still work normally).

Solution: Please unplug the power cord and wait a minute, then plug in the power cord. After the power is re-applied, the unit should return to normal operation. Note: Do not share the power supply with a large power appliance. Do not locate the ionizer near electromagnetic radiation appliances, i.e., microwave ovens.

Issue 3: Background light on LCD is not on and the LCD is dark, when water passes through.

Solution: The tap water pressure is LOW (Less than 0.8L/minute water output). Please increase the water pressure and check if the filter is blocked or not. Replace filters as needed.

Issue 4: Acidic / alkaline water or purified water does not come out.

Solution: Please replace the water filters if needed. If water pressure is too low, please increase water pressure. If the "cleaning indicator" light is "ON", please initiate a cleaning cycle.

Issue 5: There is some white sediment in the alkaline water.

Solution: The produced alkaline water is usually whitish color because it contains air bubbles during production. It will return to clear very soon. This is normal, and the water is OK to drink.

Issue 6: A white film appears on the inner wall of the alkaline water container.

Solution: This is a crystallization of calcium carbonate from gas in the air after the reaction of solid components of calcium. These white substances are normal when generating alkaline water. It does not imply there is anything wrong with the water. The water is OK to drink. Note: If this condition persists, please use food-grade citric acid or white vinegar to clean the electrode plates. Allow the machine to soak for a few hours and flush thoroughly. Please see maintenance procedures. Note: If the machine will not be used for a long period of time, please unplug the power cord, remove the filter and remove the shunt Watergate and water purifier. Drain thoroughly and place the filter cartridge in a sealed plastic bag/film and store in the refrigerator.

Issue 7: Alkaline water output amount reduces gradually.

Possible causes and solutions:

• Inlet Water Pressure: Make sure input water pressure is sufficient (above 40 psi).
• Filter blockage: Please make sure filter life is OK and replace filters as needed.
• Excessive build-up of calcium deposits in the outlet tube: Please clean the outlet tube as needed. Soak in citric acid as needed.
• Excessive build-up of calcium deposits on the electrolysis plates: Please contact customer service for support.

Made In China