RANARP Pendant Lamp Installation Guide
Product by IKEA
Important Safety Information
⚠️ **IMPORTANT:** Always shut off power to the circuit before starting installation work. In some countries, electrical installation work may only be carried out by an authorized electrical contractor. Contact your local electricity authority for advice.
Installation Instructions
1. Prepare Lamp Holder and Shade
Connect the wires to the lamp holder. Attach the lamp holder assembly to the RANARP pendant lamp shade.
2. Assemble Mounting Bracket
Insert the mounting bracket assembly (part numbers 153748, 153749) into the lamp shade. Ensure it is correctly oriented.
3. Route Wires
Route the electrical wires through the mounting bracket assembly.
4. Secure Wires in Bracket
Ensure the wires are properly positioned and secured within the mounting bracket.
5. Prepare Wires and Attach Shade
Strip approximately 20-40 mm (25/32" - 1"37/64) of insulation from the ends of the electrical wires.
Attach the lamp shade assembly to the ceiling canopy or suspension point.
6. Connect Wires to Terminal Block
Connect the wires to the terminal block. The terminal block is marked with 'L' for Line (live) and 'N' for Neutral. Ensure correct polarity is maintained.
7. Secure Wire Connections
Insert the wires into the corresponding terminals in the block. Push until you hear an audible 'Click!', indicating a secure connection.
8. Detailed Wiring View
Refer to the detailed diagrams for correct wire routing and connection to the 'L' (Line) and 'N' (Neutral) terminals.
9. Final Wire Connection
Complete the wire connections to the terminal block. Confirm each connection makes a 'Click!' sound.
10. Mount Lamp and Final Caution
Mount the assembled lamp to its final position. CAUTION: Do not overtighten the lamp or its components.
Additional Notes
Always refer to local electrical codes and regulations.
If unsure about any part of the installation, consult a qualified electrician.
