Maxcom FW48 Vanad Smart Watch

1. Global View

The Maxcom FW48 Vanad Smart Watch features a 1.3-inch AMOLED display.

Front View:

• Power Button: Double-click to access more functions.
• Display: 1.3" AMOLED screen.

Back View:

• Heart Rate Sensor: Monitors heart rate.
• Charging Point: Connects to the charging cable.

Touch Controls:

You can swipe from the bottom left corner to add more functional interfaces. To change them, long-press any functional interface (except the first), click 'delete', then add another.

Connect the watch with the APP for detailed product features.

2. Power On/Off

Power On:

• Long press the power button to start the watch from a shutdown state.
• The watch automatically starts when it is charged in a shutdown state.
• If the watch has ultra-low power, connect the charger and charge for 30 seconds before starting.

Power Off:

• Long press the power button to shut down the watch when it is powered on.
• After an ultra-low battery vibration reminder, the watch will automatically shut down.

Reset:

• In the power-on state, navigate to the function menu and select Settings > Reset.
• After resetting, the watch will automatically restart. This process will unbind the watch from the phone and clear all user data.

3. Charging Instructions

To charge your device, use the provided cable. Connect it to the charging area on the backside of the watch. Connect the other end of the charger to a power source via a USB plug or a wall outlet (max 5V/2.1A).

If the device is not used for an extended period, charge it at least once every 3 months.

Ensure your watch is 100% charged before first use. If the charging indicator does not light up, plug it in for 2 hours and try again.

4. Phone System Compatibility & App Download

Compatibility:

• Android 4.4+
• iOS 8.5+

Some additional functions, such as message push and caller ID display, may not be compatible with certain phones.

APP Download:

Scan the QR code provided or search for "Wearfit Pro" in the Google Play Store or Apple App Store to download and install the application.

5. Connection

For Phone:

1. Turn on your phone's Bluetooth and GPS functions.
2. Turn on the watch.
3. Launch the Wearfit Pro app and find the FW48 device. Tap the "connect" option.

Instructions: Allow the app to run in the background and permit the forwarding of desired notifications to the watch.

The watch displays connection status: Bonded device, Unbonded, FW48_WATCH Connected, Bonded.

6. Disclaimer

The contents of this manual are provided according to the status quo. Unless required by applicable law, the company provides no express or implied guarantees for all contents in this manual, including but not limited to the guarantee of marketability or for a specific purpose.

To the extent permitted by applicable laws, the company will not be liable for any special, incidental, indirect, or secondary damages arising from the product, including loss of profits, data, goodwill, or anticipated savings.

The company's maximum liability for losses incurred from using the products described in this manual is limited to the price paid for the product, except for damages in accordance with applicable laws in cases involving personal injury.

The health data related to heart rate, ECG, body temperature, blood pressure, blood oxygen, etc., are for reference only and not for medical diagnosis.

7. Warning

Protection Level

The watch meets the IP67 protection level requirements and is suitable for daily waterproofing such as hand washing and rain. It is not suitable for water sports such as diving or long-term swimming pool or coastal swimming.

It is not applicable to hot water showers, hot springs, saunas (steam rooms), diving, water skiing, other wading activities, and deep water activities facing high-speed water flow.

It can prevent dust conditions in environments like a living room, office, laboratory, or light industrial studio, but it is not suitable for special dust environments.

Maintenance

• Please keep the equipment and its accessories dry. Do not dry them with external heating equipment such as a microwave oven or hair dryer.
• Please use normal temperature clean water for cleaning equipment regularly to avoid dirt and bacteria.
• Do not place the device and its accessories in areas where the temperature is too high or too low, as this may cause malfunction, fire, or explosion.
• Do not subject the device and its accessories to strong shocks or vibrations, as this may damage them and cause malfunction.
• Please avoid using the device in environments with hot sun, high temperatures, humidity, and open flames.
• Do not use strong chemicals, detergents, or strong detergents to clean the device or its accessories.
• Do not allow children or animals to chew or swallow the device.

Environmental Information: This device is marked with the WEEE symbol (crossed-out wheeled bin), indicating it should not be disposed of with household waste. Dispose of it at designated collection points for proper recycling. The device contains a Li-ion battery; do not dispose of batteries in fire.

Specifications

* EIRP - Maximum radio frequency emission power.

Abbreviated EU Declaration of Conformity: Maxcom S.A. declares that this radio equipment type FW32 Neon complies with Directive 2014/53/EU and Directive 2011/65/EU (RoHS). The full EU Declaration of Conformity is available at: www.maxcom.pl.

7. Warranty

Scope of Warranty:

• The manufacturer guarantees that the Maxcom branded product is free from material and manufacturing defects for 24 months from the date of purchase. Contact the seller or official distributor in case of defects. Proof of purchase must accompany claims.
• The warranty service will be provided free of charge, with repairs or replacements made within a reasonable time for products not meeting warranty parameters.
• This warranty applies only to the original purchaser and is non-transferable. The warranty is valid within the territory of the Republic of Poland.
• The warranty does not exclude, limit, or suspend the buyer's rights arising from the seller's liability for product defects.
• Technical and warranty support is available on the website: www.maxcom.pl.

The warranty does not cover:

• Normal wear and tear, including the battery (unless the damage is caused by a material or manufacturing defect).
• Mechanical, thermal, or chemical damage and resulting malfunctions.
• Defects caused by improper use of the device, deviating from its intended purpose or the instructions in the manual; unauthorized modifications; use or storage deviating from the product's technical specifications; improper maintenance; use of batteries different from those supplied; use of batteries incompatible with the product; or repairs performed by non-brand service centers.

The above refers to the scope of warranty for consumer goods arising from Directive 1999/44/EC.

8. Frequently Asked Questions (FAQs)

1. Common Problems with SMART Device Connection

Troubleshooting Steps:

1. Ensure Bluetooth (BT) is turned on and visible to other devices on your phone.
2. Turn on GPS/Location services.
3. Install the application and grant necessary permissions during setup (e.g., background running, media access).
4. Connect the watch through the application.

If Connection Fails:

1. Verify that GPS is enabled on your phone.
2. Go to your phone's settings > Apps & notifications > App permissions > enable background running and notifications for the app.
3. Check if the watch/smart band is already paired with your phone via the phone's Bluetooth menu. If it is, remove the device from the Bluetooth menu and then try connecting through the application again.

2. Why does the watch disconnect when the smartphone screen turns off (Android)?

1. Background running might be locked.
2. Enable background running for the app in your phone's settings.

3. Why doesn't the watch display notifications?

1. Check within the app to ensure the notification function is activated.
2. Enable the app to display notifications in the phone's application settings. The watch displays notifications from your phone's notification bar; if this function is not active on your phone, you need to enable it in your phone's settings.

4. Why can't you bathe in hot water with the watch?

Steam can enter the device and cause corrosion. The IP67 water resistance rating means the product is suitable for use in rain or for hand washing, but it is not suitable for swimming or diving.

5. What is MET?

MET stands for Metabolic Equivalent, used to assess exercise intensity. One MET is approximately equivalent to 1 kcal per 1 kg of body weight per hour, or 3.5 ml of O2 per kg of body weight per minute at rest. The data presented is an approximation of actual values, as factors such as gender, age, and body composition influence resting energy expenditure.

9. Attention

Consult your doctor before starting any new sport. The measurements provided by the watch are for informational purposes only and are NOT suitable for medical diagnosis. ⚠