Smart Watch Maxcom FW48 Vanad

1 Global View

Power Button: Double-click for more functions.

Screen: 1.3" AMOLED display.

Heart Rate Sensor: Located on the back.

Charging Point: Located on the back.

Touch Instructions

• Long Press: On the watch face, long press to choose the UI interface.
• Swipe Down: On the watch face, swipe down to view the shortcut menu.
• Swipe Right: On the watch face, swipe right to view functions.
• Click: Select and confirm.
• Swipe Up: On the watch face, swipe up to view messages.
• Swipe Left: On the watch face, swipe left to quickly view information.

* Swipe to the bottom left corner to add other functional interfaces. To change them, long press any functional interface (except the first) and click 'delete' to add another.

Please connect the watch with the APP for detailed product features.

2 Power On/Off

Power On:

• Long press the power button to start the watch from a shutdown state.
• The watch starts automatically when it is charged in a shutdown state.
• When starting with ultra-low power, connect the charger to charge the watch for 30 seconds before starting.

Power Off:

• Long press the power button to shut off the watch in a power-on state.
• After an ultra-low battery vibration reminder, the watch will automatically shut down.

Reset:

• In the powered-on state, enter the function menu and select Settings > Reset.
• After resetting, the watch will automatically restart.
• After restarting, the watch will be unbound from the phone and all user data will be cleared.

3 Charging Instructions

To charge your device, use the cable provided in the box. Connect it with the charger area on the backside of the watch. Connect the other end of the charger to a power source via a USB plug or a wall outlet.

Please charge the device once every 3 months if it is put idle and not in use.

• Make sure your watch is 100% charged before first use.
• If it does not light up, plug it in for 2 hours and try again.

4 Phone System Compatibility

Android: 4.4+

iOS: 8.5 +

* Some additional functions (message push/caller ID display, etc.) may not be compatible with some phones.

APP Download

Scan the provided QR code or search for "Wearfit Pro" in Google Play or the App Store to download and install it.

[Description of QR Code: A QR code graphic is shown here, which when scanned, directs the user to download the Wearfit Pro application.]

5 Connection

For Phone

1. Turn on the phone's Bluetooth. Turn the watch on. Enter the Wearfit Pro App to connect with the watch name FW48.
2. After connecting, please set up correct personal information in the App. Incorrect information may affect fitness data results.

Tips: Please allow the App to run in the background and grant the App notification permissions in phone settings. The time/date on the watch may not be accurate if it is disconnected from the smartphone or powered off for a long time. Please connect with the App to sync data before use.

Connection Status:

• Bonded device: FW48_WATCH (Connected/Bonded)
• Unbonded

6 Disclaimer

• The contents of this manual are provided "as is". Unless required by applicable law, the company does not provide any express or implied guarantees for all contents in this manual, including but not limited to the guarantee of marketability or for a specific purpose.
• To the extent permitted by applicable laws, the company will not be liable for any damages arising from the use of the contents of this manual and the products described herein. Compensation will not be made for any special, incidental, indirect, or consequential damages arising from the product, nor for lost profits, data, or goodwill.
• To the extent permitted by relevant laws, in any case, the company's maximum liability for losses suffered from using the products described in this manual is limited to the price paid for the purchase of this product (except for damages in accordance with applicable laws in cases involving personal injury).
• The health sign data related to heart rate, ECG, body temperature, blood pressure, blood oxygen, etc., involved in this product are for reference only and not for medical diagnosis.

7 Warning: Protection Level

The watch meets the IP67 protection level requirements and is suitable for daily water resistance such as hand washing and rain. It is not suitable for water sports such as diving, long-term swimming in pools, or coastal swimming.

It is not applicable to:

• Hot water showers.
• Saunas (steam rooms).
• Diving.
• Water skiing.
• Other wading activities and deep water activities facing high-speed water flow.

It can prevent dust conditions in environments like living rooms, offices, laboratories, light industrial studios, and storage rooms, but is not suitable for special dust environments.

7 Warning: Maintenance

• Please keep the equipment and its accessories dry. Do not dry with external heating equipment such as a microwave oven or hair dryer.
• Please clean the equipment regularly with normal temperature clean water to avoid dirt and bacteria.
• Do not place the device and its accessories in areas with excessively high or low temperatures, as this may cause malfunction, fire, or explosion.
• Do not subject the device and its accessories to strong shocks or vibrations, as this may damage the device and cause malfunction.
• Please avoid using the device in environments with hot sun, high temperatures, humidity, or open flames.
• Do not use strong chemicals, detergents, or abrasive cleaners to clean the device or its accessories.
• Do not allow children or animals to chew or swallow the device.

Specifications

* EIRP - Maximum radio frequency power emitted in the range 2402-2480MHz. EIRP: -2.11dBm.

Simplified EU Declaration of Conformity

Maxcom S.A. hereby declares that the radio equipment type FW32 Neon is in compliance with Directive 2014/53/EU and Directive 2011/65/EU (RoHS). The full text of the EU declaration of conformity is available at the following internet address: www.maxcom.pl

Note: The original document mentions FW32 Neon here, which seems like a typo and should likely refer to FW48 Vanad, as the document is about FW48. I will keep it as is from the source but note this discrepancy.

7 Warranty

SCOPE OF WARRANTY

• The manufacturer guarantees that the Maxcom product is free from material and workmanship defects under normal use for a period of 24 months from the date of purchase.
• In case of a defect or failure, contact the seller or authorized distributor. Proof of purchase must be attached to the warranty claim.
• The warrantor will repair or replace products not meeting the specified warranty parameters free of charge within a reasonable time.
• This warranty applies only to the first purchaser and is non-transferable. It covers the territory of the Republic of Poland.
• This warranty does not exclude, limit, or suspend the buyer's rights arising from the provisions on warranty for defects of sold goods.
• Technical and warranty support is available at www.maxcom.pl.

Warranty does not cover:

• Normal wear and tear, including batteries, unless damage resulted from material or manufacturing defects.
• Mechanical, thermal, or chemical damage and defects caused by them.
• Defects resulting from improper use contrary to the intended purpose and user manual; unauthorized modifications; use or storage contrary to the product's technical specifications; improper maintenance; use of parts other than those supplied or use of any parts not intended for use with the product; technical work performed by unauthorized personnel.

The above applies to the warranty rules for consumer goods resulting from Directive 1999/44/EC.

SHORT DECLARATION OF CONFORMITY

This equipment complies with Directive 2014/53/EU of the European Parliament and of the Council on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity, and Directive 2011/65/EU (RoHS).

8 Frequently Asked Questions (FAQs)

1. Common problems connecting SMART devices

1. Enable Bluetooth (phone must be discoverable by other devices).
2. Enable GPS/Location.
3. Install the app and grant it necessary permissions during installation (e.g., background operation, multimedia access).
4. Connect to the watch via the APP.

If unsuccessful, try the following:

1. Check if GPS is enabled.
2. In phone settings > Apps & notifications > App permissions: allow background operation and notifications.
3. Check if the watch/band is already connected via the phone's Bluetooth menu. If so, go to the Bluetooth menu, select 'forget device', then reconnect through the app.

2. Why does the watch disconnect when the smartphone screen turns off (on Android)?

1. Background app operation is restricted.
2. Allow background operation.

3. Why doesn't the watch display notifications?

1. Check in the app if the notification function is enabled.
2. Grant the app permission to display notifications in its settings. The watch displays notifications from the phone's notification bar. If the phone does not have this function enabled, it must be activated in the phone's settings.

4. Why should you avoid hot baths with the watch?

Because water vapor can enter the device, potentially causing corrosion. The IP67 water resistance rating means the product can be used during rain or hand washing, but it is not suitable for swimming and/or diving.

5. What is MET?

MET (Metabolic Equivalent of Task) is used to assess the intensity of physical exertion. One MET is equivalent to resting energy expenditure in a seated position, approximately 1 kcal/kg of body weight/hour, or an oxygen consumption of 3.5 ml O2/kg body weight/min. However, these figures are approximations, as factors like sex, age, and body composition influence resting energy expenditure.

9 Attention

Consult a doctor before starting any new sport. Watch measurements CANNOT be used for medical diagnoses.

Environmental Protection Information

Note: This device is marked according to European Directive 2012/19/EC and Polish law on Waste Electrical and Electronic Equipment with the symbol of a crossed-out wheeled bin. This marking indicates that this equipment must not be disposed of with other household waste at the end of its service life.

Note: This equipment must not be disposed of with municipal waste! The product should be utilized through selective collection at designated points. Proper handling of used electrical and electronic equipment helps prevent negative consequences for human health and the environment arising from hazardous elements and improper storage or processing.

The device contains a Li-ion battery. Used batteries are harmful to the environment. They should be stored in a designated collection point in an appropriate container, in accordance with applicable regulations. Batteries and accumulators must not be disposed of with municipal waste; they should be returned to a collection point. DO NOT DISPOSE OF BATTERIES OR ACCUMULATORS IN FIRE.