Sunco 3" LED Selectable Slim Downlight

Components

• Junction Box (x1) - A small electrical enclosure for wire connections.
• Wire Nuts (x2) - Connectors used to join electrical wires securely.
• Installation Template (x1) - A paper guide used for accurately cutting the ceiling opening.

Easy Installation: Canless Recessed Mount

1. Step 1

   Turn off the circuit breaker before beginning the installation process.

2. Step 2

   Set the preferred color temperature (CCT) by using the switch located on the back of the fixture. Options typically range from 2700K (warm white) to 5000K (daylight).

3. Step 3

   Cut out the provided Installation Template according to the housing size and securely tape it onto the ceiling in the desired location.

4. Step 4

   Cut the ceiling hole precisely using the taped Installation Template as a guide.

5. Step 5

   Open the junction box and remove the appropriate knockout for the wire entry.

6. Step 6

   Connect the supply and junction wires using the provided wire nuts: connect the Black wire to Black (Live), and the White wire to White (Neutral). Tuck the connected wires neatly inside the junction box and close the cover.

7. Step 7

   Insert the junction box through the prepared ceiling hole. For New Construction Applications, the junction box should be secured to studs, joists, or similar fixed structural units. For Remodel Applications, the junction box does not require securing to studs, joists, or structural units.

8. Step 8

   Attach the fixture to the junction box using the provided connector, as illustrated. Tighten the connector by hand.

9. Step 9

   Push up the spring clips located on the fixture and insert the fixture into the ceiling opening.

10. Step 10

    Turn on the circuit breaker and test the light to ensure it functions correctly.

Warning

To reduce the risk of fire, electric shock, or injury:

• Turn off the circuit breaker before installing this fixture.
• This product should be installed by a person familiar with the construction and operation of the product and hazards involved. Safety eyeglasses and gloves are recommended.
• Abide by regional and local laws or regulations.
• Proper grounding is required to ensure safety.
• Do not alter, relocate, or remove wiring during installation.
• Do not make or alter any open holes in the wiring enclosure or electrical components during installation.
• Check for shipping damage before installing. If the product is damaged, do not use it.
• Keep the fixture away from corrosive substances.
• Suitable for damp locations at temperatures ranging from 4°F to 113°F. Not for use where directly exposed to water.
• Clean the fixture regularly to ensure proper operation. Do not clean with harsh solvents.
• Use safety precautions and abide by regional and local laws or regulations.
• This product is not compatible with 3rd party sensors.
• This product is not compatible with photo controls.
• This product is not compatible with occupancy sensors.
• This product is not compatible with timing devices.

Specifications

Required Tools

Ladder, Hole Saw, Tape