Sunco
Lighting made better.
User Manual
Recessed LED 6" Baffle Slim Downlight
SKU: DL_BS6_NL-WH-2760K
support@sunco.com | (844) 334-9938
What's in the Box?
Nightlight Downlight
- Light Fixture (x1) - [Diagram: A circular LED downlight fixture with a slim profile and attached junction box.]
- Junction Box (x1) - [Diagram: A rectangular electrical junction box with a hinged lid.]
- Installation Template (x1) - [Diagram: A circular paper template with markings for cutting a hole.]
- Wire Nuts (x3) - [Diagram: Three conical plastic connectors for joining electrical wires.]
Let there be light! (literally)
Get Your Gear (Not Included)
- Tape - [Diagram: A roll of adhesive tape.]
- Hole Saw - [Diagram: A circular saw attachment for cutting holes.]
- Ladder - [Diagram: A portable ladder.]
- Wire Strippers - [Diagram: A tool for removing insulation from electrical wires.]
Before You Start
Safety Information
- Turn off circuit breaker before installing this fixture.
- This product should be installed by a person familiar with the construction and operation of the product and its hazards.
- Safety eyeglasses and gloves are recommended.
- Abide by related regional and local laws or regulations.
- Proper grounding is required to ensure safety.
- Do not alter, relocate, or remove wiring during installation.
- Do not make or alter any open holes in wiring enclosure or electrical components during installation.
- Use safety precautions and abide by regional and local laws or regulations.
- This product is not compatible with 3rd party sensors.
- This product is not compatible with photo controls.
- This product is not compatible with occupancy sensors.
- This product is not compatible with timing devices.
- Check for shipping damage before installing. If the product is damaged, do not use it.
- Keep fixture away from corrosive substances.
- Suitable for damp locations at temperatures ranging from -4°F to 113°F. Not for use where directly exposed to water.
- Clean the fixture regularly to ensure proper operation. Do not clean with harsh solvents.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference that may cause undesired operation. Please review all instructions carefully prior to installation.
⚠️ WARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.gov
Quickstart Guide
Step 1
Use template to cut hole. [Diagram: A hand holding a circular template against a ceiling, indicating where to cut.]
Step 2
Connect supply & junction wires. [Diagram: A junction box with wires being connected using wire nuts.]
Step 3
Attach fixture to junction box. [Diagram: A downlight fixture being attached to a junction box.]
Step 4
Insert fixture into ceiling. [Diagram: A downlight fixture being pushed into a pre-cut hole in a ceiling.]
Installation Guide
STEP 1
a. Turn off circuit breaker before installation.
b. Cut out 6.33” housing size on Installation Template, then tape onto ceiling in desired location.
c. Cut ceiling hole using Installation Template as a guide. [Diagram: A ruler showing 6.33 inches, a template being taped to a ceiling, and a tool cutting a hole.]
STEP 2
a. Open junction box and remove appropriate knockout. [Diagram: An open junction box with a circular knockout being removed.]
STEP 3
a. Connect supply and junction wires using wire nuts:
- -Black to Black (Live)
- -White to White (Neutral)
b. Tuck connected wires inside junction box and close the cover. [Diagram: Connected wires tucked into junction box, cover closed.]
Installation Guide (Cont.)
STEP 4
Insert junction box through ceiling hole. [Diagram: The junction box assembly being inserted through the ceiling hole.]
a. New Construction Applications: Secure to studs, joists, or similar fixed structural units.
b. Remodel Applications: Do not require to secure to studs, joists, or similar fixed structural units.
STEP 5
a. Attach fixture to junction box using connector as shown on image (1). Tighten connector by hand (2). [Diagram: Close-up of a wire connector being attached and tightened.]
b. Push up spring clips and insert fixture into ceiling. Turn on circuit breaker and test light. [Diagram: Spring clips pushing up, fixture inserted into ceiling.]
STEP 6
Note: To toggle between downlight and nightlight, turn wall switch and night light off, wait 3 seconds, then switch on.
To reset fixture, turn off, wait 5 seconds, then turn on. [Diagram: Hand operating a light switch.]
Product Details
Recommended Dimmers
| Brand | Model |
|---|---|
| LUTRON | P-PKG1WB-WH |
| LUTRON | MACL-153M-WH |
| LUTRON | PD-6WCL-WH |
| LUTRON | AYCL-153P-WH |
| LUTRON | DVCL-153P-WH |
| LEVITON | D26HD-2RW |
| KASA SMART | HS220 |
| KASA SMART | HS220P3 |
Specifications
| Specification | Value |
|---|---|
| Voltage | 120 V |
| Wattage | 14 W |
| Wattage Equivalency | 140 W |
| Beam Angle | 90° |
| Weight | 0.85 lbs |
| Housing Material | Plastic + Metal J-Box |
| Dimmable | YES |
| Average Lifetime | 50,000 Hours |
| Lumens | 1200 lm |
| Moisture Rating | Damp Rated |
| CRI | 80+ |
| Usage | Indoor |
| IC Rated | Yes |
| Warranty | 7 Years |
Common Troubleshooting
Feeling in the dark about an issue with your product? No worries! Our troubleshooting section is here to shed some light and provide you with easy-to-follow solutions for any problem. If you still need some assistance, please feel free to contact us with any questions. Our team of lighting experts are happy to help brighten your day.
Installation
| Issue | Solution |
|---|---|
| Light isn't turning on. | Double check if fixture is properly connected and circuit breaker hasn't been tripped. |
| Light isn't bright enough. | Check proper wattage and for unobstructed fixture. |
Dimming
| Light not dimming to lowest setting. | Ensure minimum dimmer load requirement is met. |
| Light not dimming smoothly. | Verify dimmer compatibility with fixture. |
| Light not compatible with dimmer switch. | Check light-dimmer compatibility. Consider purchasing compatible switch if necessary. |
Flickering
| Light is flickering when turning on. | Check that fixture wiring connections are secure. |
| Light flickering with other lights on the same circuit. | Check that the lights on the same circuit are not overloading the circuit. |
| Light flickering when turned on. | Verify fixture compatibility and that it is grounded. |
| Light flickering when dimmed. | Verify dimmer switch compatibility. |
Buzzing
| Fixture buzzing with power outages. | Verify light is connected to surge protector securely. |
| Fixture buzzing with appliances or electronic devices. | Look for nearby interferences that can cause buzzing. Such as televisions, radios, computers, etc. |
| Fixture buzzing when dimmed. | Verify dimmer switch compatibility. |
File Info : application/pdf, 8 Pages, 179.44KB
DocumentDocumentReferences
Adobe PDF Library 17.0 Adobe InDesign 19.0 (Windows)
P65Warnings.ca.govRelated Documents
 |
Sunco 6" LED Recessed Black Slim Downlight with Night Light | CL_SL6_NL-BK-2760K Explore the Sunco 6" LED Recessed Black Slim Downlight with Night Light (CL_SL6_NL-BK-2760K). This fixture offers selectable color temperatures, 1500 lumens, and dimmable functionality, ideal for residential and commercial spaces. Features include a 120° beam angle, 35,000-hour lifespan, and compatibility with select Lutron and Leviton dimmers. |
 |
Sunco 6" LED Recessed Downlight with Night Light User Manual & Installation Guide Comprehensive user manual and installation guide for the Sunco 6" LED Recessed Black Slim Selectable Downlight with Night Light (SKU: CL_SL6_NL-BK-2760K). Includes safety information, quickstart, detailed installation steps, product specifications, and troubleshooting tips. |
 |
Sunco 6" LED Recessed Slim Downlight w/Night Light - Specifications and Dimmer Compatibility Comprehensive specifications and dimmer compatibility guide for the Sunco 6" LED Recessed Black Slim Downlight with Night Light. Details include lumens, CCT, beam angle, operating temperature, and a list of compatible dimmers from brands like Leviton, Lutron, GE, Legrand, and Eaton. |
 |
Sunco 3" LED White Baffle Selectable Slim Ceiling Light User Manual User manual for the Sunco 3-inch LED White Baffle Selectable Slim Ceiling Light (SKU: CL_FBF3-WH-2760K), covering installation, safety, troubleshooting, specifications, and recommended dimmers. |
 |
Sunco 6" Ultra-Slim Baffle Downlight & Dimmer Compatibility Guide Explore the Sunco 6" Ultra-Slim Baffle Downlight, a versatile lighting solution offering selectable color temperatures and comprehensive dimmer compatibility information. This guide details specifications, performance metrics, and lists compatible dimmers from major brands like Leviton, Lutron, and GE. |
 |
Sunco 3" LED Selectable Slim Downlight Installation Manual Installation guide for the Sunco 3-inch LED Selectable Slim Downlight, detailing components, easy installation steps, safety warnings, and technical specifications. Includes required tools and warranty information. |
 |
Sunco 6" High Lumen Slim Selectable Downlight - Specifications & Features Detailed specifications and features for the Sunco 6" High Lumen Slim Selectable Downlight, including lighting performance, environmental ratings, construction details, and certifications. Ideal for creating well-lit environments with easy installation. |
 |
Sunco LED Slim Selectable Downlight - Specifications and Features Detailed specifications, features, and certifications for the Sunco LED Slim Selectable Downlight, offering dimmable lighting with adjustable color temperatures and easy installation. |