PETKIT PURA MAX Self-Cleaning Cat Litter Box User Manual

01 Product List

Please ensure that all accessories are present before installation and use.

Main Unit

A diagram shows the PETKIT PURA MAX self-cleaning cat litter box, illustrating its overall appearance with a large, rounded main body, an internal cylinder with a patterned sifter, and a control panel on the right side.

Accessories

• Power Adapter: A diagram shows a standard power adapter with a plug and cable.
• Trash Bag: A diagram shows a rectangular trash bag.
• Odor Eliminator N50: A diagram shows a small square odor eliminator. Note: N50 Pet Odor Eliminator is not included in some versions.
• User Manual: A diagram shows a small booklet labeled 'USER MANUAL'.
• Cat Litter Remover: A diagram shows a long, comb-like tool designed for removing cat litter.

02 Product Description

A detailed diagram of the PETKIT PURA MAX main unit highlights and labels its key components:

• Cylinder: The main rotating drum where litter is contained.
• Side Cover: The removable cover on the side of the cylinder.
• Litter Sifter: The internal mesh component within the cylinder for separating waste.
• Proximity Sensor: A sensor located at the front bottom of the unit, designed to detect presence.
• Magnetic Side Cover: The side cover that attaches magnetically.
• Menu Button: A button on the control panel for navigating functions.
• OLED Display: A small screen on the control panel showing status and options.
• Power Input: The port on the back for connecting the power adapter.
• Waste Drawer: The pull-out drawer at the bottom for collecting waste.
• Latch: A mechanism to secure the waste drawer.
• OK Button: A button on the control panel for confirming selections.

Note: To provide the best experience possible, PETKIT periodically updates its products with various improvements. The actual product may vary from its illustrations on packaging. For any inconsistencies, please refer to the actual product.

03 Product Installation

3.1 Installing Waste Drawer

1. Slide the latch to the right and pull out the waste drawer; open its lid to take out accessories.

   A diagram illustrates the waste drawer being pulled out after the latch is slid to the right. The drawer's lid is then shown opened, revealing accessories inside. The latch is depicted in an 'Unlocked' position.

2. Spread the trash bag evenly and press it into the bottom of the waste drawer, and close the lid of waste drawer.

   Two diagrams show the process: the first shows a trash bag being spread into the waste drawer; the second shows the lid being closed over the trash bag, with arrows indicating the bag needs to be fastened by the two sides of the lid (Fig. 1).

   Note: The trash bag needs to be fastened by the two sides of the lid (as shown in Fig. 1).

3. Take out the Odor Eliminator N50 and put it into the groove and press the silicone lid to firmly close.

   Two diagrams illustrate this: the first shows the odor eliminator being placed into a designated groove within the waste drawer lid; the second shows the silicone lid being pressed down to secure it.

4. Re-install the waste drawer to the main unit and lock the latch.

   A diagram shows the waste drawer being pushed back into the main unit. Another diagram shows the latch being slid to the left, indicating a 'Locked' position.

5. Take out the power adapter, insert it into the power input on the back of the main unit, and then plug in.

   Two diagrams illustrate the power connection: the first shows the power adapter cable being inserted into the power input port on the back of the main unit; the second shows the main unit with the power adapter plugged in, ready for use.

3.3 Pouring Cat Litter

1. After plugging in and starting up, shortly press the Menu button to switch to "Maintenance Mode". Shortly press the OK button to activate the mode.

   A diagram shows a hand pressing the Menu button, and the OLED display showing "Maint mode".

2. Pour in cat litter when the cylinder opening faces up and stays still, and shortly press the OK button to exit “Maintenance Mode”.

   A diagram shows cat litter being poured into the cylinder of the unit while it is in maintenance mode.

   Warning: Ensure that the amount of cat litter does not exceed the MAX line. The length of the cat litter selected must be shorter than 1.2cm, and the diameter less than 3mm.

3. Double click the OK button and the device automatically levels off the cat litter.

   A diagram shows a hand double-clicking the OK button, and the OLED display showing "Level cat litter".

04 How to Use

4.1 Operating Main Unit

Button Usage

The control panel has an OLED display, a Menu button, and an OK button.

• Long press Menu button: Turns the device on/off.
• Short press Menu button: Switches functions, and the screen will display the selected function.
• Short press OK button: Executes the selected function.

Function Description (as displayed on OLED)

• Clean now (Basket icon): Starts self-cleaning mode. Click to clean the litter box after your cat finishes toileting.

• Deodorize now (Leaf icon): Starts deodorizing. Click it to deodorize.

• Level cat litter (Leveling icon): Levels the cat litter in the cylinder (use when daily adding cat litter). Double click OK to activate.

• Rest (Reset icon): Resets the cylinder back to its original position.

• Maint mode (Maintenance icon): Use it when adding cat litter or cleaning cat litter. Click to enter maintenance mode to leave the cylinder opening facing up and staying still to clean the device and add cat litter with ease.

• Connect to Wi-Fi (Wi-Fi icon): Connects to Wi-Fi (use when binding the device to the App).

4.2 Display Indication

Status Indication

The OLED display shows various status indicators:

• Light status: An indicator light shows the device's current status.
• Network status (Wi-Fi signal icon): Indicates Wi-Fi connection status.
• Toilet Times (Toilet icon, e.g., '50 Toilet Times'): Shows the total cat toileting times of the day.
• Add weight (Scale icon, e.g., '4.2kg Add weight'): Shows the real-time weight of the cat in the litter box.

Fault Indication

The OLED display also shows fault indications:

• Odor removal (Exclamation mark in triangle): Please check whether the air purifier smart spray is installed.

• Litter Box status (X in circle): Please turn the cylinder knob on the back of the main unit to the locked position.

• Cat is in the litter box (Cat icon in triangle): The device will automatically pause and alert when a cat approaches or enters the litter box during operation.

• Device failure (Exclamation mark in triangle): Check detailed fault in the App.

4.3 App Binding and Activating

1. Download and install the App:

   A diagram shows a QR code for downloading the PETKIT App. The app is available on the App Store (Apple) and Android™ stores (Google Play).

   Download "PETKIT" App on the App Store or Android Store.

2. Add the device:

   Open the downloaded "PETKIT" App and navigate to the home page; Tap the "+" button in the top right corner to add the device. Select "PETKIT PURA MAX SELF-CLEANING CAT LITTER BOX".

   A screenshot of the PETKIT app home page shows a "+" button in the top right corner and a list of devices. A larger circle highlights the "+" button for adding a device.

3. Start connection:

   Tap the Menu button on the device and switch to “Configure network”. Tap the OK button to initiate connection. The screen will display “Connecting...”, and the App will start connecting to the device. Please wait until the configuration is successful.

   Screenshots of the PETKIT app show the steps: "Add a device" screen with a prompt to watch a binding video, followed by a "Bind device" screen searching for nearby devices, and then a "Wi-Fi configuration" screen where the user enters the Wi-Fi password. Finally, a "Configuration succeeded" screen confirms the successful connection.

4. Read usage guide:

   To ensure the safety of your pet and the correct usage of this product, please read the usage guide carefully to use the product properly after successfully connecting it to the App for the first time.

   Screenshots of the PETKIT app's instruction screens are shown:

   • The first screen shows a diagram of the litter box with a red 'X' indicating that objects should not be placed within 10cm around the litter box to avoid obstructions near sensors.
   • The second screen shows 'Smart settings' with options for 'Kitten protection' (disables automatic/periodic cleaning when enabled) and 'Automatic Cleaning' (auto-cleaning OFF). It also recommends turning on 'Kitten Mode' for kittens or pregnant cats.
   • The third screen shows a diagram of the litter box with a label 'Familiar cat litter' and advises users to put familiar-smelling litter if their cat is new to self-cleaning boxes to help them adapt.

   Note: To enhance user experience, occasional software upgrades may occur so that the app interface may vary. Please refer to the actual product.

4.4 Smart App Control

1. Viewing device status:

   Click "PETKIT PURA MAX” on the device list on the home page to enter the device's home page and take a look at its working status, toileting times of the day as well as remaining cat litter.

   A screenshot of the PETKIT app's PURA MAX home page displays:

   • Odor Eliminator: Shows remaining service life (e.g., '30days').
   • Waste container: Shows status (e.g., 'is normal').
   • Today's toileting statistics: Shows total toileting times (e.g., '2time') and average duration (e.g., '58s'), with comparison to the previous day.
   • Today Toilet: Shows total toilet times (e.g., '2 times') and duration (e.g., '2'00"').
   • Navigation options at the bottom: 'Clean now', 'Maint mode', 'Dump cat litter', 'Smart settings'.

2. Basic function description (App buttons):

   • Clean now (Basket icon): Click it to clean the litter box after your fur baby finishes toileting.

   • Maintenance mode (Hand icon): Click it to enter the maintenance mode to leave the cylinder opening facing up and staying still to clean the device and add cat litter with ease.

   • Empty cat litter (Trash can icon): Click it to empty the remaining cat litter in the cylinder after installing the cat litter remover.

   • Smart settings (Gear icon): Safety and cleaning functions can be set.

   • Odor removal now (Leaf icon): Click it to deodorize.

   • Light (Light bulb icon): Click it to turn on the light to check the conditions of your fur baby or the inside of the cylinder. *PETKIT AIR PURIFIER SMART SPRAY needs to be purchased separately.

4.5 Usage of Air Purifier Smart Spray

Click "Bind Smart Spray” on the home page, or click “SUPER ODOR REMOVAL” in settings to bind PETKIT AIR PURIFIER SMART SPRAY (It needs to be purchased separately).

1. Odor removal: Odor removal is automatically performed after your fur baby toilets to keep air fresh.

2. Light: Light is turned on via app to check the conditions of your fur baby or the inside of the cylinder.

Screenshots of the PETKIT app show:

• The main device status page with an option to 'Bind Smart Spray'.
• The 'Settings' page with 'SUPER ODOR REMOVAL' option, showing 'Odor Eliminator' status.
• The 'Odor Removal Device' page, confirming if 'PURA AIR Smart Spray' is associated, and providing options for 'SUPER ODOR REMOVAL' (automatic deodorization after use) and 'Cylinder Light On' (for better vision). It also describes 'Resolute R&D Purifying Liquid' as independently researched and developed liquid that removes odors and formaldehyde, killing up to 12 kinds of common harmful bacteria, with safe ingredients for both pets and humans.

Note: To enhance user experience, occasional software upgrades may occur so that the app interface may vary. Please refer to the actual product.

4.6 Other Functions

1. Kitten mode:

   This mode needs to be turned on if you have kittens or pregnant cats at home. When this mode is on, the device will not clean itself periodically or automatically. Waste is collected by clicking "Clean now”.

   A toggle switch labeled 'Kitten protection' is shown, with a description: 'Automatic or periodically cleaning will be disabled after kitten protection is enabled'.

2. Rotation without interruption:

   When this function is off, the device will stop working if it senses any cat is approaching. When the opening of the cylinder is facing down, other cats may enter the litter box, resulting in their secretions leaking into the bottom of the device, which makes it harder to clean.

   Warning: When this function is on, the device will not stop working if it senses any cat is approaching, which may reduce the possibility of cat entering and its secretions leaking into the bottom of the device.

   A toggle switch labeled 'Continuous rotation' is shown, with a description: 'The cylinder does not stop as it rotates from its initial position'.

Note: To enhance user experience, occasional software upgrades may occur so that the app interface may vary. Please refer to the actual product.

05 Cleaning and Maintenance

For your cat's health, please clean the cylinder regularly.

5.1 Emptying Cat Litter

Before cleaning, please empty the remaining cat litter in the cylinder.

1. Press the fasteners of the cat litter remover into corresponding holes of the litter sifter. Upon hearing “Click”, the installation is done.

   A diagram shows a hand pressing the cat litter remover into the litter sifter, with an audible 'Click!' indicated.

2. Click "Empty cat litter" on the home page of the device to empty remaining cat litter.

   A diagram shows a hand interacting with the OLED display, highlighting the 'Empty cat litter' option (trash can icon).

3. When emptying the remaining litter is done, pinch A (as shown in the figure) to pull down the remover.

   A diagram shows a hand pinching point 'A' on the cat litter remover to detach it from the sifter.

5.2 Disassembling Cylinder

1. Lift upward to remove the side cover.

   A diagram shows a hand lifting the side cover upwards from the main unit.

   Warning: Please be sure to turn off or plug off the device before removing the cylinder.

2. Disassemble lock components.

   A diagram shows a hand disassembling the internal lock components of the cylinder, with arrows indicating the direction of movement.

3. Lift upward to take down the cylinder.

   A diagram shows a hand lifting the entire cylinder upwards from the main unit.

5.3 Disassembling Litter Sifter

1. Open the side cover and grasp the litter sifter (as shown in Fig. 1).

   A diagram (Fig. 1) shows the side cover open and a hand grasping the litter sifter.

   Warning: Please be sure to turn off or plug off the device before removing the cylinder.

2. Press it inward (as shown in Fig.2).

   A diagram (Fig. 2) shows a hand pressing the litter sifter inward.

3. Make the sifter slightly bent and pull it out when it is off the buckle.

   Two diagrams illustrate this: the first shows the sifter being slightly bent downwards; the second shows a hand pulling the sifter out after it is unbuckled.

5.4 Cleaning Main Unit

1. Wash the cylinder and litter sifter, which is suggested to add moderate amounts of detergent and rinse them thoroughly.

2. Use a wet towel to wipe the surface and interior of the main unit, ensuring the sensor remains clean.

   A diagram of the main unit highlights the 'Proximity Sensor' at the bottom front.

   Warning: After cleaning, all parts should be reassembled only when they are completely dry. The main unit should only be wiped clean. It is prohibited to rinse or immerse it in water, or it may be damaged!

5.5 Installing Litter Sifter

1. Secure the front side of the litter sifter into point a.

   A diagram shows a hand securing the front part of the litter sifter into a designated point 'a' within the cylinder.

2. Grasp the litter sifter and press it inward until it is slightly bent.

   A diagram shows a hand grasping the litter sifter and pressing it inward, causing a slight bend.

3. Secure the other side of the litter sifter into point b.

   A diagram shows a hand securing the other side of the litter sifter into point 'b'.

4. If the litter screen is able to be shaken back and forth, the installation is complete.

5.6 Installing Cylinder

1. Re-install the cylinder.

   A diagram shows the cylinder being placed back into the main unit.

2. Secure the buckles of the cylinder and make sure they are firmly fastened.

   A diagram shows the buckles on the cylinder being secured, with arrows indicating the locking motion.

3. Screw the side cover and re-install the magnetic side cover.

   A diagram shows the side cover being screwed into place and the magnetic side cover being re-installed onto the unit.

06 Video Guide

6.1 Installation & Usage Video

Please copy the video URL and open it in your browser to view the video: https://youtu.be/2aP5PqltmZc

6.2 Maintenance & Cleaning Video

Please copy the video URL and open it in your browser to view the video: https://youtu.be/r9Hg3WPaqkg

6.3 Installation & Usage Video for PETKIT AIR PURIFIER SMART SPRAY

Please copy the video URL and open it in your browser to view the video: https://youtu.be/Pce7ExQcWhU

07 Basic Specifications

08 A Message to Our Valued Customers

• Thank you for choosing the PETKIT PURA MAX SELF-CLEANING CAT LITTER BOX.
• Please read the User Manual carefully before installing and using the product. Any installation and usage indicates that you have carefully read and accepted the User Safety Guide below.
• PETKIT is not responsible for and legally liable for any accidents or injuries resulting from improper use of the product.
• PETKIT reserves the rights of interpretation and revision.

09 User Safety Guide

*Failure to follow the safety guides outlined below can result in product malfunction or other unforeseen losses.

• Please install and use the product as instructed in the User Manual.
• Kittens under six months of age and cats weighing less than 1.5kg are not recommended to use this product.
• Do not expose the product to high temperature and humidity.
• The product is for indoor use only. Avoid direct sunlight exposure and keep it away from open flames.
• Although the device uses low voltages, the power cord being chewed by pets can cause electrical leakage. Please ensure proper guidance for your pets to use the product.
• Use only the original adapter to avoid device damage or safety hazards.
• Place the device on a level surface and prevent it from touching wall.
• Do not lean the device against something else to avoid safety hazards.
• Do not immerse or soak the main unit bottom of the product in water.
• Lift and place the product gently when handling to protect the weight sensor at its bottom.
• If you are not using or moving the product for an extended period, it is recommended to unplug.
• Children should use this product under the supervision and guidance of adults.
• Repairs should only be performed with professionals' guidance to avoid accidental damage.
• It is prohibited to place objects on the top of the device or press its top to prevent the device from operating improperly.
• Before leaving for an extended period, ensure sufficient cat litter in the box and space in the waste container.
• If you encounter any issues with the product, please contact PETKIT customer service for assistance.

Disposal and Regulatory Information

Disposal

The European directive 2012 / 19 / CE on Waste Electrical and Electronic Equipment (WEEE) requires that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old appliances must be collected separately in order to optimize the recovery and recycling of the materials they contain and reduce the impact on human health and the environment. The crossed out "wheeled bin" symbol on the product reminds you of your obligation, that when you dispose of the appliance it must be separately collected. Consumers should contact their local authority or retailer for information concerning the correct disposal of their old appliance.

FCC Compliance

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Warning

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

IC Warning

English: This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.

French: Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.