Enbrighten Bistro LED String Lights

Introduction

Congratulations on your purchase of Enbrighten Bistro Lights. These lights are designed to provide lighting for life with no bulbs to replace. You can purchase additional lights to form one continuous string up to 750 feet.

IMPORTANT: Before installation, please read all warning statements included in this guide.

Installation Guide

Step 1: Initial Setup

1. Carefully unpack Bistro Lights from the box. Remove any wire ties.
2. When installing Bistro Lights outdoors, a Ground Fault Circuit Interrupter (GFCI) receptacle must be used. Before mounting, plug the Bistro Lights into the GFCI receptacle to ensure all lights function correctly. IMPORTANT: Unplug the Bistro Lights prior to mounting.

Step 2: Installing Bistro Lights

1. IMPORTANT: Mount Bistro Lights only to solid support structures such as joists, beams, studs, or other solid mounting surfaces.
2. Each Bistro Light features a universal keyhole for mounting with lights hanging downward. Mounting hardware (screws, nails, zip ties, hooks, etc.) is not included.
3. Guide wires must be used in compliance with local electrical and building codes to support the Bistro Lights.
4. Once the GFCI outlet location, mounting surface, and hardware are determined, mount your Bistro Lights.
5. After mounting, connect the male plug into the GFCI receptacle and securely place the female receptacle cover over the unused outlet.

Step 3: Installing Multiple Bistro Light Sets

Extend the length of your lights by connecting more than one strand together to form one continuous string up to 750 feet. Follow the installation steps above, ensuring each connection between strands is secure. Once installation is complete, place the female receptacle cover firmly over the unused outlet.

Step 4: Removing Bistro Lights

1. Always unplug Bistro Lights from their receptacle before removal.
2. Carefully remove each light individually from the mounting hardware. NOTE: For your safety, never pull or jerk lights from the mounting hardware.
3. Store lights in a dry location.

SAVE THESE INSTRUCTIONS

Product Specifications & Availability

Enbrighten Bistro Lights are available in multiple lengths. Find more information at www.byjasco.com.

Refer to the reverse side for electrical rating.

Automation & Recommended Accessories

Simplify your Bistro Lights experience by automating your on and off light times. We recommend the following models available at your local retailer or at www.byjasco.com:

• GE myTouchSmart Outdoor Timer (Plug-in) Model #26898: The easiest timer to set on the market. Simply select your time and go.
• GE myTouchSmart Timer (In-Wall) Model #41431: Provides easy-set controls if your receptacle is controlled by a switch.
• myTouchSmart Outdoor/Indoor Wifi Smart Plug Model #39845: Schedule and control outdoor lighting from any mobile or voice-controlled device.
• GE Bluetooth Smart Switch (In-Wall) Model #13869: Offers Bluetooth control if your receptacle is controlled by a switch.

[Visual: QR code for video instructions and link to http://bit.ly/2V4GzKV]

Important Information & Warnings

Refer to the manual or visit www.byjasco.com for limitations and restrictions on warranties and product registration.

Outdoor Use Warnings

WARNING: When using outdoors, use portable luminaires. Basic safety precautions should always be followed to reduce the risk of fire, electrical shock, and personal injury, including:

• Use only three-wire outdoor extension cords with three-prong grounding plugs and grounding receptacles.
• Ground Fault Circuit Interrupter (GFCI) protection must be provided on circuits or outlets used for wet location portable luminaires.
• Use only with outdoor-rated extension cords (e.g., SEW, SEOW, SEOOW, SOW, SOOW, STW, STOW, STOOW, SJEW, SJEOW, SJEOOW, SJW, SJOW, SJOOW, SJTW, SJTOW, or SJTOOW).

General Safety Warnings

• WARNING: Keep plastic bags away from babies and children. Do not use in cribs, beds, carriages, or playpens. The thin film may cling to the nose and mouth and prevent breathing.
• NOTE: Ensure the Bistro Light's receptacle cover is firmly installed and well seated when not in use to connect additional strings.

Warranty Information

This Jasco product is warrantied for lifetime replacement of the LED light source only.

Electrical Ratings

• Input: 120 V, 60 Hz

Manufacturer & Contact Information

MADE IN CHINA / HECHO EN CHINA

Distributed by JASCO PRODUCTS COMPANY LLC, 10 E. MEMORIAL RD., OKLAHOMA CITY, OK 73114.

Patents pending.

Questions? Contact Jasco U.S.-based Consumer Care at 1-800-654-8483 between 7 AM - 8 PM CST.

[Certifications: ETL Listed, Intertek, Recyclable Packaging Symbol]

Risk of Electric Shock Warnings

WARNING: RISK OF ELECTRIC SHOCK

• Receptacle outlets used for powering Bistro Lights must comply with all national and local electrical codes. Consult a local electrician if unsure.
• For use only on GFCI protected circuits.
• Do not submerge.
• Do not use around aquariums.
• Bistro Lights are a wet location product with no serviceable parts.
• Do not use with extension cords near water or where water may accumulate.
• Keep lamps at least 16 feet (4.8 meters) from pools and spas.
• Keep plugs and receptacles dry.
• Avoid damage to cords and lamp assemblies during installation. Periodically inspect for physical damage or damage from outdoor exposure.
• Replace any damaged Bistro Light strings.
• Do not install in locations where lights can be stepped on.
• Ensure lights are unplugged from power during installation.
• Install out of reach of children; do not allow children to play with them.
• UL recommends testing GFCI circuits and receptacles monthly.
• Do not operate without bulbs securely screwed in.

Risk of Fire Warnings

WARNING: RISK OF FIRE

• Mount Bistro Lights using their individual keyhole feature; do not mount using the main electrical cord or individual drop cords.
• Bistro Lights are designed to be linked via their electrical plugs and receptacles up to a maximum distance of 750 feet.
• Bistro Light interconnecting receptacles are intended only for linking compatible Bistro Light strings. Do not use for any other electrical purpose.
• Do not mount Bistro Lights in any position where the bulb faces upward.
• Do not allow LED lamp assemblies to contact combustible materials. LED lamp assemblies should hang freely and not be susceptible to repetitive damage from environmental conditions like wind, rain, and ice.
• Not intended for installation in ceilings, soffits, cabinets, attics, or other enclosed spaces.