Enbrighten Café Lights Installation and User Guide

Congratulations

Congratulations on your recent purchase of Enbrighten Café Lights. Enbrighten Café Lights are designed to provide lighting for life with no bulbs to replace ever again! Purchase additional lights to form one continuous string up to 750 feet!

IMPORTANT: Before installation, please read all the warning statements included at the bottom of these instructions. In order to ensure proper installation, please follow each step below.

Step 1: Initial Setup

1. Carefully unpack Café Lights from the box. Remove the wire ties.
2. When installing Café Lights outside, a Ground Fault Circuit Interrupter (GFCI) receptacle should be used. Before installing, plug the Café Lights into the GFCI receptacle to ensure all lights work properly. IMPORTANT: Unplug the Café Lights prior to mounting.

Step 2: Installing Café Lights

1. IMPORTANT: Only mount Café Lights to a solid support structure such as joists, beams, studs, or other solid mounting surfaces.
2. Each Café Light is designed with a universal keyhole for mounting with lights hanging downward. Hardware options include screws, nails, zip ties, hooks, and more (not included).
3. Use keyhole ear tabs or keyholes to mount the power supply.
4. Guide wires in compliance with local electrical and building codes may also be used to support Café Lights.
5. Once the appropriate GFCI outlet location, mounting surface, and hardware are determined, mount your Café Lights.
6. When finished mounting, place the female receptacle cover firmly over the unused outlet and plug the male plug into the GFCI Receptacle.

Mounting Points: The lights feature keyhole ear tabs and keyholes for secure mounting.

Remote Control Setup:

1. Locate the remote. Remove the back cover and insert two AAA batteries ?, noting polarity. Do not mix old and new batteries. Replace the back cover firmly.
2. To power on your Café Lights, press the red ON/OFF button located at the top of the remote. NOTE: Keep the remote indoors when not in use; it is not waterproof.

Now that your lights are installed and powered on, explore the programmable settings via your remote.

Remote Control Features

Single Color Selection

Find your favorite color on the remote's color pad and push that button to set all lights to the same color. Within this feature, you can also press the dimming button to adjust from 10 different light levels. Dimming is available for single- and dual-color selection.

Dual Color Selection

1. Press 'Color 1', then select a color from the color pad to set the color of every other bulb starting with the first bulb.
2. Press 'Color 2', then select a color from the color pad to set the color of every other bulb starting with the second bulb.
3. During selection, press the dimming button to choose one of 10 different light levels.

Strobe Selection Feature

Press the 'Strobe' button to cycle through all colors in a random pattern.

Fade Selection Feature

Press the 'Fade' button to fade lights in and out through all colors in a random pattern.

Modes Selection Feature

Press the 'Modes' button repeatedly to cycle through preset modes:

• Twinkle
• Red, white and blue
• Multi Fade
• Fall
• Christmas
• Spring
• St. Patrick's Day
• Multi

Timer Selection Feature

1. Press the '2 Hour Timer' button to activate a two-hour countdown until lights turn off.
2. Press the '4 Hour Timer' button to activate a four-hour countdown until lights turn off.

Once settings are customized and you are ready to power off, press the red ON/OFF button. Your Café Lights will automatically remember the last customized settings and turn back on in the same mode/color scheme.

Step 3: Installing Multiple Café Light Sets

Extend the length of your lights by connecting more than one strand together to form one continuous string up to 750 feet! Simply follow the installation steps, ensuring each connection between strands is secure and the end female receptacle is securely covered using the receptacle cover.

Available Lengths

See below for electrical rating.

Step 4: Removing Café Lights

1. Always unplug Café Lights from their receptacle prior to removing.
2. Carefully remove each light individually from the mounting hardware. NOTE: For your safety, never pull or jerk lights from mounting hardware.
3. Store lights in a dry location.

Simplify Your Experience

Automate your on/off times and add decorative shades for a distinctive style. We recommend the following models, available at select retailers or at www.cafelights.com:

Recommended Accessories

• myTouchSmart Outdoor Timer (Plug-in)
  Model #26898
  Description: The myTouchSmart plug-in timer is the easiest to set timer on the market. Simply select your time and go.
• myTouchSmart Timer (In-Wall)
  Model #26893
  Description: The myTouchSmart In-Wall Timer provides easy-set controls if your receptacle is controlled by a switch.
• GE Bluetooth Outdoor Smart Switch (Plug-in)
  Model #13868
  Description: Wirelessly schedule and control outside lights or other devices from your smartphone or tablet.
• GE Bluetooth Smart Switch (In-Wall)
  Model #13869
  Description: The GE Bluetooth In-Wall version provides the same Bluetooth control if your receptacle is controlled by a switch.
• Enbrighten Café Lens Shade Stainless Steel
  Model #35917
  Description: Express your unique style with a variety of shapes and finishes of Enbrighten Café decorative shades.
• Enbrighten Café Lens Shade Oil-Rubbed Bronze
  Model #35877
  Description: Express your unique style with a variety of shapes and finishes of Enbrighten Café decorative shades.

Important Safety Information

Refer to the manual or visit www.byjasco.com for limitations and restrictions on warranties and product registration information.

WARNING: When using outdoors, basic safety precautions should always be followed to reduce the risk of fire, electrical shock, and personal injury, including the following:

• A Ground Fault Circuit Interrupter (GFCI) protection is to be provided on the circuit(s) or outlet(s) to be used for the wet location portable luminaire. Receptacles are available with built-in GFCI protection.
• Use only with an outdoor-rated extension cord (e.g., SEW, SEOW, SEOOW, SOW, SOOW, STW, STOW, STOOW, SJEW, SJEOW, SJEOOW, SJW, SJOW, SJOOW, SJTW, SJTOW, or SJTOOW).

WARNING: Keep plastic bags away from babies and children. Do not use in cribs, beds, carriages, or playpens. The thin film may cling to the nose and mouth and prevent breathing.

NOTE: Ensure the Café Light's receptacle cover is firmly installed and well seated when not being used to connect additional strings.

Warranty Information

This Jasco product is warrantied for three (3) years with a limited-lifetime replacement warranty on the Enbrighten LED light source only.

FCC and Industry Canada Compliance

This device complies with Part 15 of the FCC and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Battery Information

Requires 2 AAA batteries ?. Observe polarity markings (+), (-).

CAUTION: BATTERIES MAY LEAK HARMFUL LIQUIDS OR IGNITABLE MATERIALS OR EXPLODE CAUSING INJURY AND PRODUCT DAMAGE.

• DO NOT MIX OLD AND NEW OR OTHER BATTERY TYPES.
• REPLACE ALL BATTERIES AT THE SAME TIME.
• REPLACE EXHAUSTED BATTERIES IMMEDIATELY.
• REMOVE BATTERIES IF PRODUCT IS TO BE UNUSED FOR EXTENDED PERIODS OF TIME.

Electrical Ratings

Input: 120 V, 50/60 Hz

WARNING: RISK OF ELECTRIC SHOCK

• Receptacle outlets used for powering Café Lights shall comply with all national and local electrical codes. Consult a local electrician if unsure of compliance requirements.
• For use only on GFCI protected circuits.
• Do not submerge.
• Do not use around aquariums.
• Café Lights are a wet location product and have no serviceable parts.
• Do not use with extension cords near water or where water may accumulate.
• Keep lamps at least 16 feet from pools and spas.
• Keep plugs and receptacles dry.
• Avoid damage to cords and lamp assemblies during installation. Periodically inspect Café Lights for physical damage or damage caused by outdoor exposure.
• Replace any damaged Café Light strings.
• Do not install in locations where Café Lights can be stepped on.
• Ensure Café Lights are unplugged from power during installation.
• Café Lights should be installed out of the reach of children or not allowing children to play with them.
• UL recommends testing GFCI circuits and receptacles every month to ensure proper operation.
• Do not operate without the bulb securely screwed in.

WARNING: RISK OF FIRE

• Café Lights are designed to be mounted with their individual keyhole mounting feature; do not mount by using the main electrical cord or individual drop cords.
• Café Lights are designed to be linked using their electrical plugs and receptacles to a maximum distance of 350 feet.
• Café Light interconnecting receptacles are intended only for linking compatible Café Light strings. Do not use Café Light receptacles for any other electrical purpose.
• Do not mount Café Lights in any position where the bulb is facing up.
• Do not allow LED lamp assemblies to contact combustible materials. LED lamp assemblies should hang freely and not be susceptible to repetitive damage caused by environmental conditions such as wind, rain, and ice.
• Not intended for installation in ceilings, soffits, cabinets, attics, or other enclosed spaces.

Product Information

Made in China

Distributed by: Jasco Products Company LLC, 10 E. Memorial Rd., Oklahoma City, OK 73114.

This Jasco product comes with a 3-year limited warranty. Visit www.byjasco.com for warranty details.

Questions? Contact Jasco Products Company LLC at 1-800-654-8483 between 7:00 AM - 8:00 PM CST.

Patents pending | Visit www.cafelights.com

Version 4, 4/19/17

UL Listed