Enbrighten Café Lights

Introduction

Congratulations on your recent purchase of Enbrighten Café Lights. Enbrighten Café Lights are designed to provide lighting for life with no bulbs to replace ever again! Purchase additional lights to form one continuous string up to 750 feet!

IMPORTANT: Before installation, please read all the warning statements included at the bottom of these instructions.

Initial Setup

1. Carefully unpack Café Lights from box. Remove the wire ties.
2. When installing Café Lights outside, a Ground Fault Circuit Interrupter (GFCI) receptacle must be used. Before installing, plug the Café Lights into the GFCI receptacle to ensure all lights work properly. IMPORTANT: Unplug the Café Lights prior to mounting.

Installing Café Lights

1. IMPORTANT: Only mount Café Lights to a solid support structure such as joists, beams, studs or other solid mounting surfaces.
2. Each Café Light is designed with a universal keyhole for mounting with lights hanging downward. Hardware options include screws, nails, zip ties, hooks and more (not included).
3. Use keyhole ear tabs or keyholes to mount power supply. (Visual Description: Mounting points on the light fixture include keyhole slots and ear tabs for attachment with screws or other hardware.)
4. Guide wires in compliance with local electrical and building codes may also be used to support Café Lights.
5. Once appropriate GFCI outlet location, mounting surface and hardware are determined, mount your Café Lights.
6. When finished mounting, place the female receptacle cover firmly over the unused outlet and plug the male plug into the GFCI Receptacle.

Remote Control Setup and Operation

1. Locate the remote. Remove the back cover and insert two AAA batteries (included). Note polarity. Do not mix old and new batteries. Replace back cover. NOTE: Your Enbrighten Seasons Café Lights will come automatically paired with its remote.
2. To power on, press the red ON/OFF button. NOTE: Keep remote indoors when not being used. Remote is not waterproof.
3. Explore programmable settings:
   • Single Color Selection: Select a color from the remote's color pad. Use the dimming button to adjust from 10 light levels (available for single/dual color).
   • Dual Color Selection: Press Color 1, select color for odd bulbs. Press Color 2, select color for even bulbs. Dimming is available.
   • Strobe Selection: Press the Strobe button to cycle through all colors randomly.
   • Fade Selection: Press the Fade button to fade in and out through all colors randomly.
   • Modes Selection: Press the "modes" button to cycle through preset modes: Twinkle, Multi Fade, Christmas, St. Patrick's Day, Red/White/Blue, Fall, Spring, Multicolor.
   • Timer Selection: Press the 2 Hour Timer button for a two-hour countdown. Press the 4 Hour Timer button for a four-hour countdown.
4. To power off, press the red ON/OFF button. NOTE: Lights will remember the last customized settings.

Installing Multiple Café Sets

Extend your lighting by connecting more than one strand to form a continuous string up to 750 feet. Ensure each connection is secure and the female receptacle is covered.

Remote Pairing and Unpairing

To Pair: Plug in lights. Within 8 seconds, press and hold the remote's ON/OFF button. Lights will turn white, blink once. The remote and lights are now paired. A remote can be paired with multiple Enbrighten Seasons Lights simultaneously or with up to 8 remotes.

To Unpair: Plug in lights. Within 8 seconds, press and hold the yellow button (bottom left). Lights will turn white, blink twice. The remote and lights are now unpaired. Multiple lights can be unpaired simultaneously.

Removing Café Lights

1. Always unplug Café Lights from their receptacle prior to removing.
2. Carefully remove each light individually from the mounting hardware. NOTE: For your safety, never pull or jerk lights from mounting hardware.
3. Store lights in a dry location.

Recommended Accessories

Simplify your Café Light experience by automating on/off times and adding decorative shades. Available at select retailers or www.cafelights.com.

Important Safety Information

SAVE THESE INSTRUCTIONS

Refer to the manual or visit www.byjasco.com for warranty limitations and product registration.

WARNING: When using outdoors, follow basic safety precautions to reduce the risk of fire, electrical shock, and personal injury:

• A Ground Fault Circuit Interrupter (GFCI) receptacle must be provided on the circuit(s) or outlet(s) for wet locations. Receptacles with built-in GFCI protection are available.
• Use only with outdoor-rated extension cords (e.g., SEW, SEOW, SEOOW, SOW, SOOW, STW, STOW, STOOW, SJEW, SJEOW, SJEOOW, SJW, SJOW, SJOOW, SJTW, SJTOW, or SJTOOW).

WARNING: Keep plastic bags away from babies and children. Do not use in cribs, beds, carriages, or playpens. The thin film may cling to nose and mouth and prevent breathing.

NOTE: Ensure the Café Light's receptacle cover is firmly installed and well seated when not connecting additional strings.

Warranty Information: This Jasco product has a 3-year limited warranty with a limited-lifetime replacement warranty on the Enbrighten LED light source only.

This device complies with Part 15 of the FCC and Industry Canada license-exempt RSS standard(s). Requires 2 AAA batteries. Observe polarity markings (+, -).

FCC NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications.

CAUTION: BATTERIES MAY LEAK HARMFUL LIQUIDS OR IGNITABLE MATERIALS OR EXPLODE CAUSING INJURY AND PRODUCT DAMAGE. DO NOT MIX OLD AND NEW OR OTHER BATTERY TYPES. REPLACE ALL BATTERIES AT THE SAME TIME. REPLACE EXHAUSTED BATTERIES IMMEDIATELY. REMOVE BATTERIES IF PRODUCT IS TO BE UNUSED FOR EXTENDED PERIODS OF TIME.

WARNING: RISK OF ELECTRIC SHOCK

• Receptacle outlets used for powering Café Lights shall comply with all national and local electrical codes. Consult a local electrician if unsure.
• For use only on GFCI protected circuits.
• Do not submerge.
• Do not use around aquariums.
• Café Lights are a wet location product and have no serviceable parts.
• Do not use with extension cord near water or where water may accumulate.
• Keep lamps at least 16 feet from pools and spas.
• Keep plugs and receptacles dry.
• Avoid damage to cords and lamp assemblies during installation. Periodically inspect for physical damage or damage from outdoor exposure.
• Replace any damaged Café Light strings.
• Do not install in locations where Café Lights can be stepped on.
• Ensure Café Lights are unplugged from power during installation.
• Café Lights should be installed out of the reach of children.
• UL recommends testing GFCI circuits and receptacles monthly.
• Do not operate without bulb securely screwed in.

WARNING: RISK OF FIRE

• Café Lights are designed to be mounted with their individual keyhole mounting feature, not by the main electrical cord or individual drop cords.
• Café Lights are designed to be linked up to a maximum distance of 350 feet.
• Café Light interconnecting receptacles are intended only for linking compatible Café Light strings. Do not use for any other electrical purpose.
• Do not mount Café Lights in any position where the bulb is facing up.
• Do not allow LED lamp assemblies to contact combustible materials.
• LED lamp assemblies should hang freely and not be susceptible to repetitive damage from environmental conditions.
• Not intended for installation in ceilings, soffits, cabinets, attics, or other enclosed spaces.

Electrical Ratings

Input: 120 V, 50/60 Hz

Available Lengths

Available at www.cafelights.com