BED FULL/QUEEN/E-KING SIZE ASSEMBLY INSTRUCTIONS

Parts and Fitting Packaging Detail

Box #1

A. HEADBOARD - 1 PC
B. HEADBOARD LEG - LEFT - 1 PC
C. HEADBOARD LEG - RIGHT - 1 PC
D. FOOTBOARD - 1 PC

Diagram shows Box #1 components: A (Headboard - a rectangular panel with vertical slats), B (Left Headboard Leg - a shaped piece), C (Right Headboard Leg - mirror image of B), and D (Footboard - a shorter rectangular panel).

Box #2

E. LEFT SIDERAIL - 1 PC
F. RIGHT SIDERAIL - 1 PC
G. CENTER SLAT - 1 PC
H. LONG LEG SUPPORTS - 4 PCS

Diagram shows Box #2 components: E (Left Siderail - a long beam), F (Right Siderail - mirror image of E), G (Center Slat - a long, narrow piece), and H (Long Leg Supports - four identical pieces).

Box #3

I. STORAGES - 2 PCS
J. STORAGE FEETS - 12 PCS

Diagram shows Box #3 components: I (Storage units - two rectangular boxes) and J (Storage Feet - small cylindrical pieces, twelve shown).

Box #4

K. BED SLATS - 12 PCS

Diagram shows Box #4 components: K (Bed Slats - twelve long, narrow wooden planks).

A visual representation of the assembled Paragon Storage Bed is shown.

Hardware - Packed in Box #2

1. ROUND HEAD SCREW 15MM - 12 PCS
2. WOOD SCREW Ø8X30MM - 8 PCS
3. ALLEN KEY - 1 PC
4. ALLEN BOLT 40MM - 18 PCS

Diagrams illustrate: a 15mm round head screw, an 8x30mm wood screw, an Allen key, and a 40mm Allen bolt.

Hardware - Packed in Box #1

1. ALLEN BOLTS 35MM - 8 PCS
2. SPRING WASHER - 8 PCS
3. WASHER - 8 PCS
4. ALLEN KEY - 1 PC

Diagrams illustrate: 35mm Allen bolts, spring washers, standard washers, and an Allen key.

Note: Your box may contain extra hardware.

Tool Required

Phillips Head Screw Driver (Not Provided)

A Phillips head screwdriver is depicted.

Step 1: Attach Headboard Legs

Follow the illustration: Insert the Allen bolt into the pre-drilled hole and turn to unify the headboard leg (B/C) to the headboard panel (A).

Use hardware packed in Box #1 for this step.

Diagram shows the headboard panel (A) with the left headboard leg (B) and right headboard leg (C) being attached. Allen bolts (1), spring washers (2), washers (3), and an Allen key (4) are used for this connection.

Step 2: Attach Left Siderail to Headboard

Fix the left siderail (E) to the headboard assembly (A/B/C) by sliding the hook installed at the end of the left siderail (E) into the corresponding slot on the headboard assembly (A/B/C). Push down on the left siderail (E) to secure the connection.

Diagram illustrates a left siderail (E) with a hook mechanism. This hook is shown sliding into a slot on the headboard assembly (A/B/C). An arrow indicates pushing down to lock the siderail in place. The partially assembled headboard with one siderail is shown.

Step 3: Attach Left Siderail to Footboard

Fix the other end of the left siderail (E) to the footboard (D).

Diagram shows the left siderail (E) being connected to the footboard (D).

Step 4: Attach Right Siderail

Fix the right siderail (F) to the headboard assembly (A/B/C) and the footboard (D).

Diagram shows the right siderail (F) being attached to both the headboard assembly (A/B/C) and the footboard (D). The basic rectangular frame of the bed is now formed.

Step 5: Secure Siderails

Secure both siderails (E, F) to the headboard assembly (A/B/C) and footboard (D) using round head screws (1), as shown in the illustration.

Diagram shows round head screws (1) being used to fasten the siderails (E, F) to the main headboard and footboard structures.

Step 6: Attach Storage Feet

Remove the plastic cover from the storage feet (J). Bolt the storage feet (J) to the storage units (I), following the illustration.

Diagram shows storage feet (J) being attached to the underside of the storage units (I) using bolts.

Step 7: Attach Storage Units to Left Siderail

Fix the storage unit (I) to the left siderail (E) using Allen bolts (4). Use the Allen key (3) to tighten the bolts.

Diagram shows a storage unit (I) being attached to the left siderail (E) using Allen bolts (4) and tightened with an Allen key (3).

Step 8: Attach Storage Units to Right Siderail and Adjust Levelers

Fix the storage unit (I) to the right siderail (F) using Allen bolts (4).

Turn the leveler underneath the storage feet (J) to adjust the storage unit (I) level, as shown in the illustration.

Diagram shows a storage unit (I) being attached to the right siderail (F) using Allen bolts (4). A close-up view illustrates adjusting the leveler on the storage feet (J) to ensure the unit is level.

Step 9: Install Center Slat and Leg Supports

Arrange the center slat (G) so that its T-nuts are facing the floor. Slide Allen bolts (4) from the top of the center slat (G) into the 2nd, 5th, 6th, and 9th pre-drilled holes.

Fix the long leg supports (H) to the center slat (G) using Allen bolts (4) and the Allen key (3).

Diagram shows the center slat (G) with T-nuts oriented downwards. Allen bolts (4) are inserted from the top into specific holes. Long leg supports (H) are then attached to the center slat (G) using Allen bolts (4) and the Allen key (3).

Step 10: Secure Bed Slats to Center Slat

Spread out all the bed slats (K). Slide the center slat (G) under the bed slats (K).

Slide Allen bolts (4) from the top of the bed slats (K) through the pre-drilled holes on the 1st, 2nd, 5th, 8th, 11th, and 12th bed slats. Tighten Allen bolts (4) with the Allen key (3) to secure the bed slats (K) to the center slat (G).

Diagram illustrates spreading out the bed slats (K). The center slat (G) is positioned beneath them. Allen bolts (4) are shown passing through specific bed slats (K) and into the center slat (G), secured by the Allen key (3).

Step 11: Place and Fix Bed Slats

Place the bed slats (K) onto the bed frame. Spread the bed slats (K) evenly across the frame.

Fix the 1st, 6th, 7th, and 12th bed slats to the bed frame using wood screws (2). Use the pilot holes on the siderails (E, F) as a reference for correct placement.

Diagram shows the bed slats (K) being laid across the bed frame. Specific slats are indicated for attachment to the siderails (E, F) using wood screws (2), with pilot holes on the siderails serving as guides.

Instructions for Adjusting Levelers

Position the bed in your room. Locate the levelers underneath each center leg (H).

Turn counter-clockwise to extend, and clockwise to contract.

Adjust levelers until each leg is applying equal upward pressure on the center slat.

Diagram shows the underside of the bed frame, highlighting the adjustable levelers located on the feet of the center leg supports (H). Instructions for turning the levelers are provided.

Maintenance Instructions

Remove box spring and mattress before moving your bed.
Lift your bed when moving it. Dragging can damage the center support.
Readjust levelers after moving your bed.

	Birch Lane Storage Bed Assembly Instructions - MO4656 Step-by-step guide for assembling your Birch Lane storage bed (model MO4656). Includes parts list, hardware details, and assembly steps for a Twin, Full, Queen, or E-King size bed.
	Birch Lane Platform Bed Assembly Instructions: Full, Queen, E-King Comprehensive guide for assembling your Birch Lane platform bed. Includes detailed steps, parts list, hardware identification, and maintenance tips for Full, Queen, and E-King sizes.
	Panel LP Storage Bed Assembly Instructions Comprehensive assembly guide for the Panel LP Storage Bed, covering Twin, Full, Queen, and E-King sizes. Includes a detailed parts list, hardware specifications, and step-by-step instructions with textual descriptions of diagrams.
	Ocean Platform Bed Assembly Instructions - Birch Lane Detailed assembly instructions for the Birch Lane Ocean Platform Bed (Full/Queen/E-King Size), including parts list, hardware, and step-by-step guidance.
	Birch Lane Storage Bed Assembly Instructions Comprehensive assembly guide for the Birch Lane storage bed, covering all parts, hardware, and step-by-step instructions for a Twin, Full, Queen, or E-King size bed.
	Birch Lane LP Storage C-King Size Bed Assembly Instructions Step-by-step assembly guide for the Birch Lane LP Storage C-King Size bed frame, including parts list, hardware details, and textual descriptions of diagrams for each assembly stage.
	Storage Bed C-King Size Assembly Instructions Detailed assembly instructions for the Birch Lane™ C-King Size Storage Bed, including parts list, hardware details, and step-by-step guidance for assembly and maintenance.
	Platform C-King Bed Assembly Instructions - Birch Lane Comprehensive assembly guide for the Birch Lane Platform C-King Bed, detailing parts, hardware, and step-by-step instructions for a secure and stable bed frame.