STORAGE BED
C-KING SIZE ASSEMBLY INSTRUCTIONS
Parts and Fitting Packaging Detail
BOX #1
- A. HEADBOARD - 1 PC
- B. FOOTBOARD - 1 PC
BOX #2
- C. LEFT SIDERAIL - 1 PC
- D. RIGHT SIDERAIL - 1 PC
- E. CENTER SLAT - 1 PC
- F. STRETCHER - 2 PCS
- G. LEG SUPPORT - 4 PCS
BOX #3
- H. STORAGE KIT - 2 PCS
BOX #4
- I. BED SLAT - 14 PCS
Hardware Packed in Box #2
| Item | Description | Quantity |
|---|---|---|
| 1 | ALLEN BOLT Ø8X30MM | 26 PCS |
| 2 | WOOD SCREW 40MM | 8 PCS |
| 3 | ALLEN KEY | 1 PC |
TOOL REQUIRED: PHILLIPS HEAD SCREW DRIVER (NOT PROVIDED) ?
Your box may contain extra hardware.
STORAGE BED ASSEMBLED
A visual representation of the fully assembled storage bed, showing the headboard, footboard, siderails, and integrated drawers.
Assembly Instructions
STEP 1: Separate Drawer Box Assembly
Remove the drawer box assembly from the frame of the Storage Kit (H) by unlocking the metal extension rail. The diagram shows the Storage Kit (H) with two sections, labeled "LEFT" and "RIGHT", indicating how to separate them by manipulating the extension rail.
STEP 2: Attach Storage Kit to Siderails
Fix the Storage Kit (H) to the Left Siderail (C) and the Right Siderail (D) using Allen Bolts (1) ?. Use the Allen Key (3) ?️ to tighten the bolts. The diagram shows multiple connection points where bolts secure the storage unit to the siderails.
STEP 3: Attach Left Siderail to Headboard
Fix one of the Left Siderails (C) to the Headboard (A). This is done by sliding a hook installed at the end of the Left Siderail (C) into a corresponding slot on the Headboard (A). The diagram shows an arrow indicating to "PUSH DOWN" the Left Siderail (C) to secure the connection.
STEP 4: Attach Right Siderail to Headboard
Repeat the same procedure as Step 3 to fix the Right Siderail (D) to the Headboard (A).
STEP 5: Attach Siderails to Footboard and Stretchers to Storage Kit
Fix the other end of the Left Siderail (C) and the Right Siderail (D) to the Footboard (B). Additionally, fix the Stretchers (F) to the Storage Kit (H) using Allen Bolts (1) ? and the Allen Key (3) ?️. A diagram illustrates turning a leveler underneath the storage leg to adjust the Storage Kit (H) level.
STEP 6: Insert Drawer Box Assembly
Insert the drawer box assembly into the full body bed assembly to complete the installation. The diagram shows the drawer units being placed into the main bed frame structure.
STEP 7: Arrange Center Slat and Attach Leg Supports
Arrange the Center Slat (E) so that its T-Nuts are facing the floor. Slide Allen Bolts (1) ? from the top of the Center Slat (E) into the 2nd, 5th, 6th, and 9th pre-drilled holes. Fix the Leg Supports (G) to the Center Slat (E) using Allen Bolts (1) ? and the Allen Key (3) ?️.
STEP 8: Secure Bed Slats to Center Slat
Spread out all the Bed Slats (I). Slide the Center Slat (E) under the Bed Slats (I). Slide Allen Bolts (1) ? from the top of the Bed Slats (I) through pre-drilled holes on the 1st, 2nd, 5th, 10th, 13th, and 14th Bed Slats. Tighten the Allen Bolts (1) ? with the Allen Key (3) ?️ to secure the Bed Slats (I) to the Center Slat (E).
STEP 9: Place and Fix Bed Slats to Frame
Place the Bed Slats (I) onto the bed frame. Spread the Bed Slats (I) across the frame. Fix the 1st, 7th, 8th, and 14th Bed Slats (I) to the bed frame using Wood Screws (2) ?. Use the pilot holes on the Siderails (C, D) as a reference for correct placement.
Instructions for Adjusting Levelers
- Position the bed in your room.
- Locate the levelers underneath each leg support.
- Turn counter-clockwise to extend, clockwise to contract.
- Adjust levelers until each leg support is applying equal upward pressure on the center slat.
A diagram illustrates a leg support with an adjustable foot, showing the direction of turn for extension and contraction.
MAINTENANCE INSTRUCTIONS
- Remove box spring and mattress before moving your bed.
- Lift your bed when moving it; dragging can damage the center support.
- Readjust levelers after moving your bed.
