Anker SOLIX C200X Portable Power Station

What's in the Box

The package contains the following items:

• Anker SOLIX C200X Portable Power Station
• AC Charging Cable
• Important Safety Instructions

Overview

The Anker SOLIX C200X Portable Power Station features several ports and controls:

• 1 Handle: For carrying the device.
• 2 Strap Attachment*: For attaching adjustable straps (sold separately).
• 3 140W USB-C Input/Output Port: A bidirectional port indicated by a [bidirectional] symbol (↔️).
• 4 Car Socket: A 12V car output port.
• 5 15W USB-C Output Port: For charging devices.
• 6 12W USB-A Output Port: For charging devices.
• 7 Car Socket On/Off Button: Controls the car socket.
• 8 Solar Input and Car Input: Ports for solar charging and car charging. Features a sliding cover to prevent simultaneous use with the 140W USB-C port.
• 9 140W USB-C Output Port: For high-speed charging.
• 10 AC Input Port: For AC recharging.
• 11 AC Output Ports: Multiple AC outlets for powering devices.
• 12 Ambient Light On/Off Button: Controls the built-in ambient light.
• 13 Ambient Light: A built-in light source.
• 14 Main Power Button: Turns the power station on and off.
• 15 LCD Screen: Displays status information.
• 16 Reset: Button to reset the device.
• 17 IoT Button: Controls Bluetooth and Wi-Fi connectivity.
• 18 AC Output On/Off Button: Controls the AC outlets.

Recharge Your Power Station

The power station can be recharged through several methods:

AC Recharging (330W Max)

Connect the power station to a wall outlet using the provided AC charging cable.

Solar Panel Recharging (100W Max)

Connect up to one Anker 100W/60W Solar Panel using a solar charging cable (sold separately). The solar panel voltage should be between 11V-28V to prevent damage to the power station.

USB-C Recharging (140W Max)

Connect a wall adapter with a USB-C cable (sold separately) to recharge. Note that USB-C recharging and XT-60 recharging cannot be used simultaneously. A 140W USB-C cable and adapter are recommended for optimal charging.

Car Recharging

Connect the power station to a car's output port using a car charging cable (sold separately). The "Remaining Battery" indicator will flicker when the battery is at 1% to remind you to recharge.

Powering Your Device

Power On/Off

Press the main power button for 3 seconds to turn the power station on or off. The power station is ready to charge devices when the "Remaining Battery" indicator is shown on the LCD screen.

• Press the main power button to turn the screen on or off when powered on.
• The screen automatically turns off after 15 seconds of inactivity; this can be adjusted in the Anker app.
• The power station will automatically power off after 2 hours of inactivity if output buttons are off and no power loads are detected. This standby duration can be set in the Anker app.

AC Charging

Press the AC outlet button and connect your device to the AC output ports. The outlets intelligently identify plug insertion and automatically turn off the power station if no plug is detected for over 15 minutes, preventing power waste.

USB Charging

Connect your devices to the USB ports. Note that USB-C2 and USB-C3 ports are PS3 classified and carry a risk of fire if additional equipment is connected without proper safeguards. Ensure connected equipment complies with IEC/EN IEC/BS EN IEC 62368-1 standards. Use a USB-C 5A cable for maximum power (100W or 140W).

Car Socket Charging

Turn on the car socket and connect your devices to start charging.

Uninterruptible Power Supply (UPS)

To use the UPS feature, connect the power station to a wall outlet with the AC charging cable, then press the AC outlet button and connect your devices via the AC output ports. UPS supports 10ms transfer time.

SurgePad™

The Anker SOLIX C200X Portable Power Station supports the SurgePad™ feature for up to 600W AC output. SurgePad™ activates automatically when the total output exceeds the rated output, allowing the power station to deliver rated power to high-wattage devices. It does not function in bypass mode (when charging with AC output on). SurgePad™ is best suited for devices that generate heat and may not support precision instruments or devices with strict voltage requirements. Test with your high-wattage devices to confirm compatibility.

Light

Ambient Light

Press the ambient light button once to turn it on. Press it up to two more times to cycle through brightness levels (? x1, ? x2, ? x3).

SOS Mode

Hold the ambient light button for 2 seconds to turn on SOS mode (? 2s).

LCD Screen Guide

The LCD screen displays various status indicators:

• 1 IoT Button: Press once to turn on Bluetooth/Wi-Fi (?). Press for 2 seconds to turn off. Press for 7 seconds to reset.
• 2 AC Charge and Voltage Frequency: Displays AC input status and frequency (e.g., ⚡60Hz, ⚡50Hz).
• 3 Low-Temperature Alert: Indicates the power station is too cold to use (❄️). Stop use until the icon disappears.
• 4 Overload Warning: Appears when a port is overloaded (⚠️). The port will turn off to prevent damage; remove the overloaded device.
• 5 High-Temperature Alert: Indicates the power station is too hot (?). Stop use and allow it to cool down.
• 6 USB-C Input/Output Port: Icon for USB-C ports (?).
• 7 USB-A Output Port: Icon for USB-A ports (?).
• 8 Car Charging: Icon indicating car charging status (?).
• 9 Remaining Battery: Displays the percentage of battery remaining (?).
• 10 Current Output Power: Shows the power being outputted (➡️ 888W).
• 11 Current Input Power: Shows the power being received (⬅️ 888W).
• 12 Estimated Time to Fully Recharge: Displays remaining time to reach full charge (⏳ 88.8 Recharge Hrs).
• 13 Estimated Time for Battery to Deplete: Displays remaining time until the battery is depleted (⏳ 88.8 Remaining Hrs).

The Anker App for Smart Control

Remotely control your power station using the Anker app. Download it from the App Store (?) or Google Play (?). Connect the device to a network before first use. Firmware updates will be notified via the app; ensure the power station is AC charged and connected to Wi-Fi or Bluetooth during updates.

Install Firmware Update

You will receive a notification for available updates. The power station must be charging and connected to Wi-Fi to complete the update.

FAQ

• Q1: What is the max power output of the AC output ports? The AC output ports can deliver a maximum of 300W rated power, supporting up to 600W with SurgePad™™.
• Q2: Can Anker SOLIX C200X Portable Power Station power a CPAP machine? Yes.
• Q3: What should I do when using a solar charger? Use an 11-28V solar charger with an XT-60 connector. Anker 100W/60W Solar Panels are recommended for best compatibility.
• Q4: Can the USB-C ports be used for input only or output only? USB-C1 and USB-C3 ports are output only. USB-C2 supports both output and input.
• Q5: How do I reset Anker SOLIX C200X Portable Power Station? If the power station is not working correctly, insert a paper clip or pin into the reset hole for 1 second for a factory reset (??). If issues persist, contact support@anker.com.
• Q6: Why is the power station not working after it hasn't been used for a long time? Storing the power station at a low capacity for extended periods can lead to self-consumption, quick discharge, poor conductivity, and reduced battery lifespan.
• Q7: How should I store and maintain the power station? Store it upright in a dry, cool environment. Turn off the main power button. Check battery capacity weekly and charge to 100% if below 30%, and fully charge every 3 months.
• Q8: Does the power station have to be used upright? Yes, the product must be used and stored upright.

Specifications