Anker SOLIX C200X Portable Power Station User Manual

What's in the Box

• Anker SOLIX C200X Portable Power Station
• AC Charging Cable
• Important Safety Instructions

Overview

The Anker SOLIX C200X is a portable power station designed to provide reliable power for various devices.

Product Diagram and Ports:

The power station features multiple ports and controls:

• 1 Handle: For carrying the unit.
• 2 Strap Attachment*: Designed for Anker SOLIX adjustable straps (sold separately).
• 3 140W USB-C Input/Output Port [bidirectional]: A bidirectional port supporting up to 140W input or output.
• 4 Car Socket: For connecting car accessories.
• 5 15W USB-C Output Port: Standard USB-C output port.
• 6 12W USB-A Output Port: Standard USB-A output port.
• 7 Car Socket On/Off Button: Controls the car socket.
• 8 Solar Input and Car Input: XT-60 port for solar input and car input.
• 9 140W USB-C Output Port: High-power USB-C output port.
• 10 AC Input Port: For AC recharging.
• 11 AC Output Ports: Multiple AC outlets for powering devices.
• 12 Ambient Light On/Off Button: Controls the ambient light.
• 13 Ambient Light: Built-in light source.
• 14 Main Power Button: Turns the power station on/off.
• 15 LCD Screen: Displays status information.
• 16 Reset: Button for resetting the device.
• 17 IoT Button: For app connectivity (Bluetooth/Wi-Fi).
• 18 AC Output On/Off Button: Controls the AC outlets.

Note: The sliding cover design on the 140W USB-C Input/Output Port is intended to prevent simultaneous use with other ports.

Recharge Your Power Station

The power station can be recharged through several methods:

AC Recharging (285W Max)

Connect the power station to a wall outlet using the provided AC charging cable.

Solar Panel Recharging (100W Max)

Recharge using an Anker 100W/60W Solar Panel via a solar charging cable. The solar panel voltage should be between 11V-28V to avoid damaging the unit. The solar charging cable is sold separately.

USB-C Recharging (140W Max)

Recharge using a USB-C cable and a compatible wall adapter. USB-C recharging and XT-60 recharging cannot be used simultaneously. For optimal charging, use a 140W USB-C cable and a 140W adapter.

Car Recharging

Connect to a car's output port using the car charging cable (sold separately).

When the power station has 1% battery remaining, the "Remaining Battery" indicator will flicker as a reminder to recharge.

Powering Your Device

Power On/Off

Press the main power button for 3 seconds to turn the power station on or off. The power station is ready to charge devices when the "Remaining Battery" indicator is shown on the LCD screen.

• Press the main power button to turn the screen on or off when powered on.
• The screen automatically turns off after 15 seconds of inactivity. This can be adjusted in the Anker app.
• The power station will automatically power off if output buttons are off and no power loads are detected for 2 hours. This standby duration can be set in the Anker app to conserve power during long-term storage.

AC Charging

Press the AC outlet button and connect your device to the AC output ports. The outlets intelligently detect plug insertion and automatically turn off the station if no plug is detected for over 15 minutes, preventing power waste.

USB Charging

Connect your devices to the available USB ports (USB-A and USB-C). Note: USB-C2 and USB-C3 ports are classified under PS3. Ensure connected equipment or accessories comply with IEC/EN IEC/BS EN IEC 62368-1 standards to mitigate fire risks. Use a USB-C 5A cable for maximum power delivery (up to 140W).

Car Socket Charging

Turn on the car socket and connect your devices to begin charging.

Uninterruptible Power Supply (UPS)

To utilize the UPS feature, connect the power station to a wall outlet using the AC charging cable. Then, press the AC outlet button and connect your devices to the AC output ports. UPS functionality supports a 10ms switchover time.

SurgePad™

The Anker SOLIX C200X supports the SurgePad™ feature, providing up to 600W AC output. SurgePad™ activates automatically when the total output exceeds the rated output, allowing the power station to deliver rated power to high-wattage devices. This feature does not function in bypass mode (when the power station is charging with AC output active). SurgePad™ is best suited for devices that generate heat and may not support precision instruments or devices with strict voltage requirements.

Light

Ambient Light

Press the button once to turn on the ambient light. Press it up to two more times to cycle through different brightness levels (x1, x2, x3).

SOS Mode

Hold the button for 2 seconds to activate SOS mode.

LCD Screen Guide

The LCD screen displays various indicators:

• 1 (IoT Icon): Indicates Bluetooth/Wi-Fi status. Press IoT button to turn on/off or reset.
• 2 AC Charge and Voltage Frequency: Displays AC charge and voltage frequency (50Hz/60Hz).
• 3 Low-Temperature Alert: Icon appears when the temperature is too low. Stop use until it disappears.
• 4 Overload Warning: Icon appears when a port is overloaded. The port will shut off to prevent damage. Remove the overloaded device.
• 5 High-Temperature Alert: Icon appears when the temperature is too high. Stop use and let it cool down.
• 6 USB-C Input/Output Port: Indicator for USB-C ports.
• 7 USB-A Output Port: Indicator for USB-A ports.
• 8 Car Charging: Indicator for car charging.
• 9 Remaining Battery for Power Station: Shows the remaining battery percentage.
• 10 Current Output Power: Displays current output power in Watts (W).
• 11 Current Input Power: Displays current input power in Watts (W).
• 12 Estimated Time to Fully Recharge: Estimated time to fully recharge.
• 13 Estimated Time for Battery to Deplete: Estimated time for battery to deplete.

The Anker App for Smart Control

Remotely control your power station using the Anker app. Download it from the App Store or Google Play. Connect the device to a network before first use. Firmware updates will be prompted through the app; ensure the power station is AC charged and connected to Wi-Fi or Bluetooth during updates.

FAQ

Q1: What is the max power output of the AC output ports?

The AC output ports can deliver a maximum of 300W rated power to connected devices. They can also support up to 600W with SurgePad™.

Q2: Can Anker SOLIX C200X Portable Power Station power a CPAP machine?

Yes.

Q3: What should I do when using a solar charger to charge Anker SOLIX C200X Portable Power Station?

The solar input supports an 11-28V solar charger with an XT-60 connector. Anker 100W/60W Solar Panel is recommended for best compatibility.

Q4: Can the USB-C ports be used to charge Anker SOLIX C200X Portable Power Station (input only) or are they output only?

The USB-C1 and USB-C3 ports are output only. The USB-C2 supports both output and input.

Q5: How do I reset Anker SOLIX C200X Portable Power Station?

If the power station is not working correctly, insert a paper clip or pin into the reset hole for 1 second for a factory reset. If issues persist, contact support@anker.com.

Q6: Why is the power station not working after it hasn't been used for a long time?

Storing the power station at a low capacity for extended periods can lead to self-consumption and quick discharge, potentially causing poor conductivity and reduced battery lifespan. Recharge the unit regularly.

Q7: How should I store and maintain the power station?

When storing: 1. Turn off the main power button. 2. Store in a dry and cool environment. 3. Check battery capacity weekly. If below 30%, charge to 100%. Recharge to 100% every 3 months regardless of level.

Q8: Does the power station have to be used upright?

Yes, the product must be used and stored upright.

Specifications