Sylvox 40" SMART RV TV
Model: RT40G3KHFA
General Information & Safety Precautions
To avoid damaging the television set, please observe the following safety instructions during setup and use:
Cleaning the Television Set
Before cleaning, disconnect the television set. Use only a soft damp cloth or a special cleaning product for flat-screens. Too much pressure on the screen can damage the television set.
Environment
- Heat/Humidity: The television set should not be exposed to high temperatures (radiators, open fire) or areas with high humidity.
- Condensation: If moved from a cool area to one with a higher temperature, allow the television set to acclimatize for at least an hour before plugging it in. Rapid temperature changes can lead to condensation and potential damage.
- Air Circulation: To prevent overheating, ensure ventilation slots at the rear are always clear and not obstructed by items like newspapers or curtains.
- Small Objects: Prevent small objects or liquids from entering the television set to avoid damage or fire.
- Crushing: Take care to avoid crushing fingers or other objects when moving or turning the television set.
Electric Supply
Use the television set only with the specified voltage. Ensure easy access to the power plug for disconnection. Do not disconnect by pulling the power cable; always pull the plug. Keep the power cable from being kinked or placed over sharp edges. Handle the power cord with dry hands only.
Moving and Repairs
- Moving: When moving the television set, hold only the casing.
- Repairs/Accessories: Repairs and servicing must be undertaken only by authorized and trained personnel.
Battery Disposal
In accordance with regulations, batteries must be disposed of in provided containers.
Power Disconnection
In extreme weather (storms, lightning) and during long inactivity periods (e.g., holidays), disconnect the TV set from the mains. The mains plug serves as the disconnect device and must remain readily operable. If not disconnected, the device will still draw power even in standby mode.
Important Warnings
WARNING: Never let people (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, use electrical devices unsupervised.
- Maintain at least 5cm (approx. 2 inches) of free space around the TV for ventilation.
- Do not place the TV, furniture, etc., on the power cord. A damaged cord can cause fire or electric shock.
- Never touch the power cord/plug with wet hands.
- Never tie knots in the power cord or tie it with other cords. Replace damaged cords only with qualified parts.
- Do not expose the TV to liquids. Do not place objects filled with liquids (e.g., vases) on or over the TV.
- Do not place open flames (e.g., lit candles) on or near the TV.
- Do not place heat sources (e.g., electric heaters, radiators) near the TV.
- Do not place the TV on the floor or inclined surfaces.
- Keep plastic bags out of reach of children and domestic animals to prevent suffocation.
- Do not dispose of batteries in fire or with hazardous materials. Batteries must not be exposed to excessive heat. Seek immediate medical attention if batteries are swallowed or placed inside any part of the body.
Wall Mounting Warnings
Read instructions before mounting. Do not install on an incline. Use specified screws and accessories. Tighten screws firmly but do not over-tighten. A falling TV can cause serious injury or death. Educate children about the dangers of climbing furniture.
Accessories Included
Please check that the following items are included with your TV. If any items are missing, please contact Sylvox.
- Television Unit
- Instructions Manual
- Warranty Card
- Power Cord
- Batteries (AAAx2)
- Car Charger Cable
- Adapter
- Remote Control
- Screwdriver
- Base
- Screws
Specifications
| Display Size | 40" |
|---|---|
| Display Screen Type | LED |
| Power Adaptor | 12V - 7A |
| Maximum Resolution | 1920 X 1080 |
| Power Consumption (Max) | 65W |
| Sound Output (Max) | 2 x 10W |
| Image Control | Fine digital control |
| Display Screen Type | Color active matrix LED display |
| TV Receive System | NTSC System, ATSC System |
| Frequency Range | Antenna: 2~69; Cable: 1~135 (Analog: 1-125, Digital: 1-135) |
| Video IN | NTSC3.58 |
| Antenna Input Impedance | 75Ω (Unbalance) |
| Product Dimensions | 35.70 x 8.32 x 22.11 inch (906.9 x 211.3 x 561.7 mm) |
| Weight (Net weight) | 14.33 lbs / 6.5 kg |
| Operation Environment Temperature | 32° to 104° F (0° to 40°C) |
Note: Design and specification modifications may be made at any time without prior notice. All data and dimensions are approximations.
Overview of TV and Remote Control
TV Front and Rear Panel
Front Panel:
- 1. SPEAKER: Audio output.
- 2. POWER INDICATOR: Red light indicates standby mode.
- 3. REMOTE CONTROL SENSOR: Receives signals from the remote control.
- 4. SOURCE Button: Press to open the input source list.
- 5. MUTE Button: Press to temporarily cut off sound; press again to resume.
- 6. CH+/- Buttons: Press to change channels. In menus, these act as Up/Down arrow buttons.
- 7. VOL+/- Buttons: Press to increase or decrease volume. In menus, these act as Left/Right arrow buttons.
- 8. POWER Button: Press to turn the TV on or off.
Rear Panel Ports and Connections
The rear panel features various ports for connecting external devices:
- DC 12V IN: For power input.
- RJ45: For Ethernet connection.
- OPTICAL OUT: Digital audio output.
- L/R OUT: Connect to amplifier or home theater audio input jacks.
- HDMI 1/2: For connecting HDMI signal sources.
- RF: Connect to an antenna or cable.
- USB 1/2: For USB input.
- MINI AV IN: For composite video signal input.
- EARPHONE OUT: For connecting headphones.
Connecting External Devices
Diagrams illustrate connections for Camcorders, DVD Players, PCs (HDMI-output), and Blu-ray disc players.
Installation
Attaching the Stand
Instruction:
- Place the TV unit on a flat and clean surface.
- Fix the stand using 2 screws via screw holes B and A.
- Fix the stand using 2 screws via screw holes D and C.
Diagrams show screw hole locations (A, B, C, D) and the stand attachment process.
VESA Mounting
The TV supports VESA mounting with a 200 x 200 mm pattern. Use M6 x 12MM screws.
Supporting Signals (HDMI)
Table lists supported HDMI preset modes with their vertical and horizontal frequencies:
| Preset Mode (HDMI) | Resolution | V.Freq.(Hz) | H.Freq.(KHz) |
|---|---|---|---|
| 1 | 640x480 | 59.94 | 31.469 |
| 2 | 720x480 | 59.94 | 31.469 |
| 3 | 720x576p | 50 | 31.25 |
| 4 | 800x600 | 60 | 37.9 |
| 5 | 1280x720p | 60 | 45 |
| 6 | 1920x1080i | 60 | 33.75 |
| 7 | 1920x1080p | 60 | 67.5 |
Remote Control Unit
Remote Control Buttons:
- 1. POWER: Turns the TV on/off.
- 2. MUTE: Temporarily cuts off sound.
- 3. Digital Buttons (0-9, -): Select channels directly.
- 4. INPUT: Opens the input source list.
- 5. NETFLIX: Direct access to Netflix (requires network connection).
- 6. YouTube: Direct access to YouTube (requires network connection).
- 7. Disney+: Direct access to Disney+ (requires network connection).
- 8. Prime Video: Direct access to Prime Video (requires network connection).
- 9. Profile: Switches user profiles.
- 10. Google Assistant: Activates Google Assistant.
- 11. Settings: Accesses system settings.
- 12. Arrow Buttons: Navigate menus and select items.
- 13. OK: Confirms selection.
- 14. BACK: Returns to the previous menu.
- 15. Guide: Opens the Live TV EPG (Electronic Program Guide).
- 16. HOME: Displays the HOME screen.
- 17. VOL+/-: Adjusts volume.
- 18. CH+/-: Changes channels.
- 19. INFO: Displays channel information.
- 20. Record Button: Records TV programs in DTV mode.
- 21. APPS: Displays the app list.
- 22. LIST: Displays the channel list.
- 23. CC: Displays Closed Caption menu.
- 24. Keyboard Button: Opens the virtual keyboard.
- 25. MTS/AUDIO: Switches audio tracks or languages.
- 26. DIGITAL MEDIA PLAYER CONTROL BUTTONS: Playback controls for USB media.
- 27. COLOR BUTTONS: Used within apps.
Installing Batteries in the Remote Control
- Use the provided screwdriver to remove the four screws on the battery cover.
- Insert two 1.5V AAA batteries, ensuring correct polarity. Do not mix old and new batteries.
- Replace and secure the battery cover with the screws.
Note: Keep the remote control sensor pointed towards the TV's remote control sensor, effective within 7 meters. Dispose of used batteries responsibly.
External Connection - Antenna
The TV has a 75Ω antenna input impedance. Use a 75Ω coaxial cable. For 300Ω flat twin-lead antennas, a 300Ω to 75Ω converter is required. Diagrams show antenna connection types.
TV Operation & Setup
Initial Setup
- Connect the TV to power. The indicator light turns red. Press the POWER button (?) on the remote or TV to turn it on.
- Pair Remote Control: Press and hold 'Back' and 'Home' buttons on the Bluetooth remote simultaneously for 3 seconds to enter pairing mode. Follow on-screen prompts.
- Select Language: Use arrow buttons (⬆️⬇️) to select the system language and press OK (✅) to confirm.
- Setup Type: Choose between 'Set up Google TV' (requires Google account for Google services) or 'Continue using basic TV' (no Google account needed).
- Google Home App: Scan the setup code to download the Google Home app on your phone, or select 'Set up on TV instead'.
- Wi-Fi Connection: Use arrow buttons (⬆️⬇️) to select your Wi-Fi network, press OK (✅), and enter the password.
- Google Terms of Service: Select 'Accept' to agree to the terms for an improved experience.
Configuration Steps
- Set Location: Select your Country/Region.
- Set Time Zone: Select your Time Zone.
- Set Daylight Saving: Choose Auto, Disable, or Always On.
- Set Tuner Mode: Select 'Cable + Antenna', 'Antenna', 'Cable', or 'Skip'.
- Review Settings: Double-check your settings and press OK to confirm and begin using the TV.
Home Screen Navigation
- After setup, you will be on the Home screen.
- Live TV: Press the SOURCE button (?️) to view input sources and select your desired one.
- On-Screen Menu: From the Home screen, press the Settings icon (⚙️) to access the menu. Use arrow buttons (⬆️⬇️) to navigate and OK (✅) to confirm.
- App Icons: Favorite applications are displayed on the Home screen. Users can add, delete, or reorder these.
- Inputs Icon: Select an input source.
- Settings: Access various system configurations.
Input Source Selection
On the HOME interface, navigate to the 'Inputs' icon using arrow buttons (⬆️⬇️), press OK (✅) to open the list, highlight an input, and press OK (✅) to switch.
Navigating the On-Screen Menu
From the HOME interface, select the Settings icon (⚙️) and press OK (✅). Use arrow buttons (⬆️⬇️) to select desired settings and press OK (✅) to enter.
Dashboard, Channels & Inputs, Display & Sound
Dashboard
The Google TV dashboard provides a central hub for accessing settings, notifications, and picture adjustments. Press the DASHBOARD button on your remote from the Home screen. Use arrow buttons (⬆️⬇️) to navigate and select items, then press OK (✅).
Channels & Inputs
Add Channels: Go to Settings > Channels & Inputs > Channels. Select your signal type and start Channel Scan for installation.
Inputs: Consumer Electronic Control (CEC) allows operation of linked devices. Interoperability with third-party CEC devices is not guaranteed.
Display & Sound
Picture Settings:
- Picture Mode: Options include Standard, Movie, ECO, Vivid, Sports, and Game, each offering different visual enhancements.
- Screen Brightness: Adjusts LED brightness for overall color vibrancy.
- Advanced Settings: Access detailed settings like Color Temperature, Noise Reduction, and Picture Reset.
Sound Settings
Configure sound settings based on broadcast format:
- Sound Mode: Standard (normal viewing), Movie (cinematic), Music (playback), News (voice clarity), Personal (custom).
- Audio Output: Select output device (TV Speaker, SPDIF, Optical, HDMI-ARC).
- Digital Output: Options include Auto, Bypass, PCM, Dolby Digital Plus, Dolby Digital.
- Digital Output Delay: Synchronizes on-screen picture with audio from digital output by delaying the audio signal. Higher values increase delay.
Network & Internet
Set up network connections to use apps and perform network upgrades.
- Wi-Fi Setting: Confirm Wi-Fi is on and connected to the correct network. Select your network and enter the password if required.
- Mobile/Tablet Hotspot: Use your device's hotspot for internet. Features include automatic video quality adjustment, Data Saver, and data usage monitoring.
- Scanning Always Available: Allows Google's location service and other apps to scan for networks even when Wi-Fi is off.
- Ethernet: Configure proxy settings or IP settings for network connection.
Accounts & Sign-in, Privacy
Accounts & Sign-in
Manage your Google account and create kids' profiles for personalized experiences. Multiple Google accounts can be added for synced media and activity across devices.
Privacy Settings
- Location: Google may collect anonymous location data to improve services.
- Usage & Diagnostics: Automatically send diagnostic information to Google (crash reports, usage data). Permissions can be adjusted in device settings.
- Ads: Manage ad settings, including resetting your advertising ID.
- Google Assistant: Use voice commands for tasks.
- Payment & Purchases: Manage account and purchases via the Play Store or web browser links.
- Security & Restrictions: Be aware of risks from unknown sources. You are responsible for any damage or data loss.
Apps & System Settings
Apps
This section covers app settings, including details and permissions.
System Settings
- Accessibility: Enhance usability with screen reader, closed captions, Switch Access, and more.
- Turn on Closed Captions: Navigate to Settings > System > Accessibility > Captions. Customize size, font, color, and background.
- Turn on High Contrast Text: Navigate to Settings > System > Accessibility. Enable 'High contrast text (Experimental)'.
- Text to Speech: Configure Text to Speech output settings and TalkBack.
- Accessibility Shortcuts: Enable quick access to accessibility features. Press and hold Back + Down arrows for 3 seconds to activate (default: TalkBack).
- TalkBack: A screen reader providing spoken feedback. Customize speech volume, verbosity, and keyboard echo.
- Use a Screen Reader: Navigate to Settings > System > Accessibility > Services > TalkBack > Enable.
- Turn on Switch Access: Navigate to Settings > System > Accessibility > Services > Switch Access > Enable.
- About: Check system updates and TV registration information.
System Settings & Remotes
Resetting the TV
Reset: Restores default settings and erases all data, accounts, files, and downloaded apps. Navigate to Settings > System > About > Reset > Factory reset.
Date & Time, Language, Storage, etc.
- Date & Time: Set automatically via network or manually. Configure time zone and 12/24-hour format.
- Language: Select the on-screen display language (e.g., English, Español, Français).
- Keyboard: Perform keyboard settings.
- Storage: View internal shared and removable storage.
- Ambient Mode: Set the TV to display Google Photos when idle.
- Power & Energy: Configure power-on behavior.
- Cast: Cast content from phones, tablets, or laptops to the Google TV.
- Restart: Reboots the TV while keeping settings. A factory reset is required to erase all settings.
Remotes & Accessories
Connect Bluetooth devices like headphones or game controllers. Only one audio device can be connected at a time.
- Pair a Bluetooth Device: Go to Settings > Remote & Accessories > Pair accessory. Ensure the device is in pairing mode. Select the device and confirm pairing.
- Reconnect a Paired Device: Go to Settings > Remote & Accessories, select the device, and choose 'Connect'.
- Troubleshoot Bluetooth Connection: If a device won't connect, try turning it off/on, disconnecting other paired devices, unplugging the TV for 10 seconds, or checking the device's compatibility and software updates. If issues persist, consider a factory reset.
Read Before Using Apps & Troubleshooting
Read Before Using Apps
Terms & Conditions Apply: App availability and features may vary by device and region. Some apps may require additional fees or memberships. Service and content availability are subject to change. Sylvox is not responsible for app service interruptions or content changes. Unstable internet may cause delays or app termination. App functionality may change with updates. Certain applications may not support multitasking. Copy/paste operations are not supported. Web browsing speed depends on the network. Video/audio codec support may limit playback. The app store has limitations on adding external apps.
Troubleshooting Guide
If you encounter problems, check the following possible solutions:
| Symptom | Possible Solutions |
|---|---|
| No power | Check power cord and outlet. Unplug and replug after 60 seconds. |
| No picture | Check antenna connection. Try another station. Adjust contrast and brightness settings. |
| Good picture but no sound | Increase volume. Check if MUTE is on. Check sound settings. Ensure external device volumes are adequate. Verify cable connections (AVI/Component/DVI-HDMI). Ensure headphone jack is not connected. |
| Good sound but abnormal color or no picture | Check antenna connection and condition. Verify Component connections are secure. |
| No response to remote control | Replace remote batteries. Clean the remote control lens. Ensure proper distance and line-of-sight to the TV (within 8m, clear path). |
| Colored dots on screen | This is a normal characteristic of LED screens (99.99% pixel effectiveness). Black dots or constant bright points are structural properties, not malfunctions. |
| Picture is breaking up | Keep TV away from noisy electrical sources. Check antenna and connections. Ensure space between optional equipment and TV. Avoid electrical interference. |
| After Auto Tuning, few channels available | Check if your area is covered by Digital Video Broadcasts. Retune or manually tune channels. Verify correct antenna type. |
| Channel cannot be selected | Check if the channel is blocked in main menu settings. |
| USB not playing | Check USB cable and power supply. Ensure USB disk is formatted to FAT32 and supports multimedia data formats. |
| Picture is distorted (macroblock, pixelization, etc.) | Video compression may cause distortion, especially on fast-moving content. Check cable connections. Low signal level may cause sound distortion. |
| Noise from speaker | Check cable connections. Low signal level may cause sound distortion. |
| TV turns off automatically | Check if Off Timer or Sleep Timer is enabled. TV may turn off if no signal is detected for 10 minutes. |
| TV turns on automatically | Check if On Timer is enabled. |
| Picture not in full screen | HD channels may show black bars on sides for SD (4:3) content. Movies with different aspect ratios may show black bars top/bottom. Adjust picture size on external device or TV. |
FCC Warning & Radiation Exposure
This device complies with FCC Part 15 rules. Operation is subject to conditions preventing harmful interference. Changes not approved by the responsible party may void user authority. Equipment complies with FCC radiation exposure limits (minimum 20cm distance from radiator).
General Warning
Never place a TV in an unstable location. Secure furniture and TV to prevent falls, especially to avoid child injuries. Ensure the plug/appliance coupler is easily accessible.
Warranty Information
Sylvox offers a 12-month warranty for this product. For questions, contact customer service via email or website.
Customer Service Contact
- Pre-sale: support@sylvoxtv.com
- After-sale: service@sylvoxtv.com
- Marketing: marketing@sylvoxtv.com
- Website: www.sylvoxtv.com
- Service Hotline: +1(866)979-5869 (Monday-Friday, 9:00AM-5:00PM EST)
Warranty Policy
- Returns: Only items purchased directly from Sylvox or authorized resellers are eligible. Customer must contact the original vendor with order details and issue description to initiate a return/refund/repair/replace. Sylvox covers return shipping costs for quality issues. A 20% restocking fee may apply for no-reason returns within 7 days. Items must be returned in original condition with all accessories.
- Refunds: Refunds are processed based on the original payment method within 7-10 business days after receipt and verification of the returned item.
- Warranty Coverage: Sylvox repairs defects in material and workmanship for 12 months under normal use.
- Warranty Exclusions: The warranty does not cover damage from abusive operation, negligence, accidents, improper installation, unauthorized repairs, normal wear and tear, cosmetic damage, incorrect voltage, acts of nature, altered serial numbers, commercial use, installation charges, signal reception problems, or third-party service/content issues.
For any questions, contact service@sylvoxtv.com.
