Inateck BCST-47 Barcode Scanner User Guide

Service Center Information

Europe:

F&M Technology GmbH
Tel: +49 341 5199 8410 (Working day 8 AM - 4 PM CET)
Fax: +49 341 5199 8413
Address: Fraunhoferstraße 7, 04178 Leipzig, Deutschland

North America:

Inateck Technology Inc.
Tel: +1 (909) 698 7018 (Working day 9 AM - 5 PM PST)
Address: 2078 Francis St., Unit 14-02, Ontario, CA 91761, USA

Japan:

Inateck 株式会社
電話番号: +81 06 7500 3304
〒547-0014 大阪府大阪市平野区長吉川辺3丁目10番11号

Manufacturer

Shenzhen Inateck Technology Co., Ltd.
Address: Suite 2507, Block 11 in Tian An Cloud Park, Bantian Street, Longgang District, Shenzhen, Guangdong, China
Email: product@licheng-tech.com
Postal code: 518129

For Product and Battery:

F&M Technology GmbH
Fraunhoferstraße 7, 04178 Leipzig, Deutschland
Tel: +49 341 5199 8410
Email: service@inateck.com
Postal code: 04178

Inateck Technology (UK) Ltd.
95 High Street, Office B, Great Missenden, United Kingdom, HP16 0AL
Tel: +44 20 3239 9869

(EC REP and UK REP markings are present for regulatory compliance.)

Download Inateck Scanner App

The Inateck Scanner app can be downloaded from the Google Play Store and the App Store.

Table of Contents (Overview)

• 1. Precautions
• 2. Product Appearance
• 3. Quick Start (Power On/Off, Interface Instructions, Charging)
• 4. Product Specification
• 5. Packing List

1. Precautions

To ensure safe operation and prevent damage, please observe the following:

• Avoid dropping the product from heights, as it contains precision electronic components susceptible to irreparable damage from falls exceeding 1.2 meters.
• Do not expose the product to water or immerse it to protect internal electronic components.
• The product contains a built-in lithium battery. Do not disassemble, strike, squeeze, or expose the battery to fire. If the battery shows severe swelling, discontinue use immediately.
• Avoid using or storing the product in high temperature, high humidity, or extreme temperature conditions to prolong battery life and maintain device performance.
• Ensure the product is placed in a safe location, out of reach of children, to prevent accidental injury or damage.
• Do not attempt to disassemble or modify the product yourself to avoid safety incidents or equipment damage.
• Read all operating instructions carefully before using the product for safety and correct operation.

2. Product Appearance

The Inateck BCST-47 Barcode Scanner is a handheld device. Key components include:

• Screen: Displays operational information.
• Scan Button: Used for scanning barcodes and controlling the device.
• Barcode Scanner: The primary component for reading barcodes.
• Lanyard Hole: For attaching a lanyard for secure carrying.
• Charging Port: For connecting the USB cable to charge the device.

The device has a compact, ergonomic design suitable for scanning.

3. Quick Start

3.1 How to Power On/Off

• To Power On: Press and hold the scan button for 3 seconds.
• To Power Off: Press and hold the scan button for 3 seconds.

Note: The scanner will automatically turn off after 10 minutes of inactivity. A light press on the scan button will wake it up.

3.2 Interface Instructions

After powering on, the screen displays operational information:

• Main Interface: Shows Signal strength, Battery Indicator, and the Barcode Display Frame which shows scanned barcodes. An Upload Prompt provides feedback on upload results.
• Inventory Mode Interface: When "Inventory Mode" is scanned or activated via the Inateck Scanner APP, the screen switches to show Signal, Battery Indicator, Barcode Display Frame, Total scan count, and Save Prompt (feedback on save results).

3.3 Charging

• Low Battery: When the battery level drops below 30%, a "low battery" pop-up reminder appears. Press the scan button once to dismiss it, then connect the included USB cable to a charger or computer USB port to charge.
• Exhausted Battery: When the battery is depleted, a "Power off" pop-up appears. Do not attempt to power on; charge the scanner promptly.

Battery voltage and charge level may fluctuate during use. Refer to the low battery prompts for status.

4. Product Specifications

5. Packing List

• BCST-47 * 1
• User Guide * 1
• USB Cable * 1

Compliance and Safety Information

FCC Note: This device complies with Part 15 of the FCC Rules. Operation is subject to conditions that prevent harmful interference. It has been tested and found to comply with Class B digital device limits, designed for reasonable protection against interference in residential installations. The device generates radio frequency energy and must be installed and used according to instructions. Users are encouraged to correct interference by reorienting antennas, increasing separation, or consulting a technician. Modifications not expressly approved by the responsible party could void user authority. The device meets general RF exposure requirements for uncontrolled environments.

EU Declaration of Conformity: Inateck Co., Ltd. declares that this device complies with Directive 2014/53/EU. A copy of the Declaration of Conformity is available at https://www.inateck.de/pages/inateck-euro-compliance.

Battery Safety Warning: This product contains a built-in rechargeable lithium battery. To ensure safety, do not dismantle, hit, crush, or expose the battery to fire. Discontinue use immediately if the battery swells severely. Avoid high-temperature environments and do not use if immersed in water. Do not mix the battery with metallic objects during transport.