Inateck PR2003 Thermal Printer User Manual

This manual provides instructions for using the Inateck PR2003 thermal printer.

Product Overview

The Inateck PR2003 is a thermal printer designed for printing labels. It supports Bluetooth connectivity for wireless printing.

Getting Started

Charging

Before first use, charge the device. Connect the charging cable to the charging port (5) and a power source.

Powering On

Press and hold the power button (1) for 3 seconds. The indicator light (2) near the power button will illuminate, indicating the printer is on.

Paper Calibration

After powering on, press the power button (1) once. The printer will automatically calibrate the paper.

Loading Paper

Instructions on how to load paper into the printer are provided in the manual.

Using the Printer

Printing Labels

Open the printing application (e.g., FlashMini).
Select the label type and enter the editing interface.
Choose the appropriate label size based on the loaded paper.
Tap "Text" to bring up a sample text field. Double-click the sample to edit the content.
Click "OK" to save the edited content.
Click "Print" to complete the printing process.

Cutting Labels

To cut labels, push the function button (3) upwards.

Indicator Lights

Indicator Status	Meaning
Green Light On	Normal Standby Mode
Blue Light On	Printing (Bluetooth Connected)
Red Light On	Charging
Red Light Slow Blinking	Low Battery
Red Light On (Specific states mentioned in other languages)	Opening Paper Compartment / Out of Paper / Improper Paper Loading

Product Specifications

Specification	Value
Bluetooth Version	V5.2
Bluetooth Range	10m
Charging Time	2-3h
Working Time	About 5h
Operating Temperature	0-50°C
Printing Resolution	203dpi
Battery Capacity	1200mAh
Bluetooth Frequency Range	2402-2480MHz
Recommended Label Paper Size	72*90mm, 105g coated paper

Packing List

Inateck PR2003 Thermal Printer
User Manual
Data Cable

App Download

Download the "FlashMini" app from Google Play or the App Store. Alternatively, scan the provided QR code (not included in output) for download.

Regulatory Information

FCC Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna; Increase the separation between the equipment and receiver; Connect the equipment into an outlet on a circuit different from that to which the receiver is connected; Consult the dealer or an experienced radio/TV technician for help. The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance, as such modifications could void the user's authority to operate the equipment. The device has been evaluated to meet general RF exposure requirements and complies with FCC's RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter.

EU Declaration of Conformity

Inateck Co., Ltd. hereby declares that this device complies with Directive 2014/53/EU. A copy of the Declaration of Conformity can be accessed from https://www.inateck.de/pages/euro-compliance.

Service and Support

Europe

F&M Technology GmbH

Tel: +49 341 5199 8410 (Working day 8 AM - 4 PM CET)

Fax: +49 341 5199 8413

Address: Fraunhoferstraße 7, 04178 Leipzig, Deutschland

North America

Inateck Technology Inc.

Tel: +1 (909) 698 7018 (Working day 9 AM - 5PM PST)

Address: 2078 Francis St., Unit 14-02, Ontario, CA 91761, USA

Japan

Inateck 株式会社

電話番号: +81 06 7500 3304

〒547-0014 大阪府大阪市平野区長吉川辺3丁目10番11号

Manufacturer

Shenzhen Inateck Technology Co., Ltd.

Address: Suite 2507, Block 11 in Tian An Cloud Park, Bantian Street, Longgang District, Shenzhen, Guangdong, China

EC REP