1. Product Diagram
An illustration of the Inateck Pro 8 2D Barcode Scanner mounted on its charging base.
Key components labeled:
- Scanning Lens
- Barcode Scanner
- Base
- Scan Mode Switch
- Connection Mode Switch
- Touch Screen
- USB Cable
Buttons on the Base:
Scan Mode Switch: When the scanner is paired with the base, place it into the base and press the button to switch between Manual Scan and Hands-free Scan. [scan-mode-switch]
Connection Mode Switch: Long press the button for 3s to switch. [connection-mode-switch]
2. Connection
(*) Wireless Adapter Mode: Wireless Adapter Mode is the default connection mode of the Pro 8 barcode scanner.
Bluetooth Mode: To enter this mode, navigate to Settings > Wireless Setting. Choose your desired mode (Bluetooth HID/SPP/GATT) and click "Pairing".
Simulated screen showing Bluetooth connection options: Adapter Mode, HID Mode, GATT Mode, SPP Mode, with 'Unlinked' and 'Pairing' status.
3. Interface Instructions
You can swipe left or right on the screen to switch between different interfaces: Scanning Interface, Scanning Modes, Settings, and Collector.
Visual representation of swiping left/right to navigate between interface screens like 'Manual-scan', 'Continuous-scan', 'Settings', 'Collector'.
Click the required function in the interface to confirm or enter the next menu.
Simulated screen showing menu options: 'wireless-setting', 'Sleep duration', 'Shutdown duration', 'Scanning Settings'.
4. Control Center
Swipe down on any interface to access the Control Center.
Screen Brightness: Slide your finger left or right to adjust screen brightness. [brightness-control]
Beeper Volume: Slide your finger left or right to adjust device volume. Sliding to the far left mutes the device. [volume-control]
Vibration: Click the icon to enable or disable vibration. [vibration-control]
5. Scanning Interface
Barcode Display: Shows the result of the barcode read.
1D Switch: Enable all 1D barcodes with one click. [1d-enable-toggle]
2D Switch: Enable all 2D barcodes with one click. [2d-enable-toggle]
Battery Level: [battery-status-indicator]
Signal Status: [wireless-signal-indicator]
6. Scanning Modes
Scroll up and down to switch scanning modes. The scanner supports three modes: Manual, Continuous, and Hands-free. Manual scanning is the default.
Simulated screen showing scanning modes: 'Manual-scan', 'Continuous-scan', 'scanning mode'.
7. Settings
Configure basic settings such as Wireless Settings, Scan Settings, Timestamp, and Factory Reset. You can also view device information, including name, software version, and battery level.
Simulated screen showing settings menu: 'wireless-setting', 'Sleep duration', 'Shutdown duration', 'Scanning Settings'.
8. Collector
Collect barcodes and upload them in batches. Features include Start Collection, Barcode Upload, and Duplicate Scan Check.
Simulated screen showing collector functions: 'Start', 'Barcode Upload', 'Clear Barcodes', 'Duplicate Scan'.
9. Battery Pop-up Reminder
When battery level drops below 30%, a "Low Battery" pop-up appears. Recharge the scanner via USB cable or base.
Simulated "Low Battery" pop-up with an "OK" button.
When battery power is depleted, a "Power OFF!" pop-up appears. Recharge the scanner promptly.
Simulated "Power OFF!" pop-up.
Note: Battery level display fluctuates with usage; refer to pop-ups for accurate status.
10. Product Specification
| Material | ABS, PC |
|---|---|
| Voltage | DC 5V |
| Battery Capacity | 2600 mAh |
| Barcode Supported | Code 128, EAN-13, EAN-8, UPC-A, UPC-E, Code 39, Code 93, Codabar, Interleaved 2 of 5, Standard 2 of 5, Industrial 2 of 5, Matrix 2 of 5, IATA 2 of 5, MSI, Code 11, ISBN, ISSN, GS1 128, GS1 DataBar, GS1 DataBar Expanded, GS1 DataBar Limited, QR Code, PDF-417, Aztec Code, Data Matrix |
| Resolution | 5mil |
| Scan Method | Auto/Manual |
| Lowest Contrast | 20% |
| Decoding Angle | Turning Angle 360°, Elevation Angle 55°, Deflection Angle 55° |
| Communication Frequency | 2.402GHz~2.480GHz |
11. Package List
- Pro 8*1
- USB Cable*1
- Instruction Manual*1
12. Compliance and Service Information
This device complies with part 15 of the FCC Rules and Directive 2014/53/EU.
A copy of the Declaration of Conformity can be accessed from https://www.inateck.de/pages/euro-compliance.
The device features CE marking and other compliance symbols [ce-symbol] [fcc-symbol].
Service Center
Europe
F&M Technology GmbH
Tel: +49 341 5199 8410 (Working day 8 AM - 4 PM CET)
Fax: +49 341 51998413
Address: Fraunhoferstraße 7, 04178 Leipzig, Deutschland
North America
Inateck Technology Inc.
Tel: +1 (909) 698 7018 (Working day 9 AM - 5 PM PST)
Address: 2078 Francis St., Unit 14-02, Ontario, CA 91761, USA
Japan
Inateck 株式会社
電話番号: +81 06 7500 3304
〒547-0014 大阪府大阪市平野区長吉川辺3丁目10番11号
Manufacturer
Shenzhen Inateck Technology Co., Ltd.
Address: Suite 2507, Block 11 in Tian An Cloud Park, Bantian Street, Longgang District, Shenzhen, Guangdong, China
EC REP: F&M Technology GmbH, Fraunhoferstraße 7, 04178 Leipzig, Deutschland, Tel: +49 34151998410
UK REP: Inateck Technology (UK) Ltd., 95 High Street, Office B, Great Missenden, United Kingdom, HP16 0AL, Tel: +44 20 3239 9869
