Inateck BCST-46 Barcode Scanner User Guide
Model: BCST-46
Getting Started
1. Quick Start
1.1 How to Power On/Off
To Power On: Press the scan button to turn on the scanner.
To Power Off: Hold the scan button for approximately 3 seconds to turn off the scanner.
[Diagram: A depiction of the Inateck BCST-46 barcode scanner showing the scan button.]
1.2 Charging
Connect the charging base to a computer or charger. Align the contacts on the scanner with the contacts on the charging base. The LED light on the scanner will turn red when it is charging.
[Diagram: An illustration showing the Inateck BCST-46 barcode scanner being placed onto its charging base, with arrows indicating contact alignment.]
1.3 Frequently Used Barcodes
Note:
- Function Setting Steps: "Enter Setup" → "e.g.: Factory Reset" → "Save and Exit".
- Items marked with (*) in the manual indicate default settings.
[Diagram: A QR code labeled "Factory Reset" and a barcode labeled "Save and Exit".]
Using the Scanner
2. Use of the Scanner
2.1 Connection
(*) Wireless Adapter Mode:
Wireless adapter mode is the default mode. Once the wireless adapter is plugged into the USB port of a computer, the scanner will be paired with the adapter automatically.
Note: If the scanner has trouble pairing with the adapter, scan the command barcodes in sequence: "Enter Setup" → "Wireless Adapter Mode" → "Save and Exit" to reconnect the scanner to the adapter.
[Diagram: A QR code labeled "(*) Wireless Adapter Mode".]
Bluetooth Mode (HID):
To enter this mode, scan the command barcodes in sequence: "Enter Setup" → "Bluetooth Pairing (HID Mode)" → "Save and Exit".
[Diagram: A QR code labeled "Bluetooth Pairing (HID Mode)".]
Product Information
3. Product Specification
| Material | ABS, PC |
|---|---|
| Voltage | DC 5V |
| Battery Capacity | 400 mAh |
| Barcode Supported | EAN-13, EAN-8, UPC-A, UPC-E, ISSN, ISBN, CodaBar, Code 128, Code93, ITF-14, ITF-6, Interleaved 2 of 5, Industrial 2 of 5, Matrix 2 of 5, GS1 Databar(RSS), Code39, Code 11, MSI-Plessey, QR Code, Data Matrix, PDF417, Aztec |
| Resolution | 3mil |
| Scan Method | Auto/Manual |
| Lowest Contrast | 15% |
| Decoding Angle | Turning Angle 360°, Elevation Angle ± 60°, Deflection Angle ± 60° |
| Communication Frequency | 2.402GHz~2.480GHz |
4. Packing List
- BCST-46 * 1
- User Guide * 1
- USB Cable * 1
Safety Information
Battery Safety Warning
This product contains a built-in rechargeable lithium battery. Please observe the following safety precautions:
- Do not dismantle, hit, crush, or expose the battery to fire.
- If the battery experiences severe swelling, discontinue use immediately.
- Avoid placing the battery in high-temperature environments, and do not use it if it has been immersed in water.
- During transportation, do not mix the battery with metallic objects.
Compliance and Support
FCC Note
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the Users, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. Such modifications could void the user's authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirement. This equipment complies with FCC's RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna(s) must not be co-located or conjunction with any other antenna or transmitter.
EU Declaration of Conformity
Inateck Co., Ltd. hereby declares that this device complies with the Directive 2014/53/EU. A copy of the Declaration of Conformity can be accessed from https://www.inateck.de/pages/inateck-euro-compliance.
[CE logo]
Service Center
Europe
F&M Technology GmbH
Tel: +49 341 5199 8410 (Working day 8 AM - 4 PM CET)
Fax: +49 341 5199 8413
Address: Fraunhoferstraße 7, 04178 Leipzig, Deutschland
North America
Inateck Technology Inc.
Tel: +1 (909) 698 7018 (Working day 9 AM - 5 PM PST)
Address: 2078 Francis St., Unit 14-02, Ontario, CA 91761, USA
Japan
Inateck 株式会社
電話番号: +81 06 7500 3304
〒547-0014 大阪府大阪市平野区長吉川辺3丁目10番11号
Manufacturer
Shenzhen Inateck Technology Co., Ltd.
Address: Suite 2507, Block 11 in Tian An Cloud Park, Bantian Street, Longgang District, Shenzhen, Guangdong, China
Email: product@licheng-tech.com
Postal code: 518129
EC REP
F&M Technology GmbH
Fraunhoferstraße 7, 04178 Leipzig, Deutschland
Tel: +49 341 5199 8410
Email: service@inateck.com
Postal code: 04178
UK REP
Inateck Technology (UK) Ltd.
95 High Street, Office B, Great Missenden, United Kingdom, HP16 0AL
Tel: +44 20 3239 9869
American Express
