ZyXEL P-660HN-51 Quick Start Guide

Device Panels

The ZyXEL P-660HN-51 features several ports and indicators on its front and rear panels:

Front Panel: Includes indicators for POWER (?), LAN1-4 (?), DSL (☎️), INTERNET (?), and WPS/WLAN (?).

Rear Panel: Features a POWER (?) button, a RESET (⚙️) button, LAN PORT 1-4 (?) connectors, and a DSL PORT (☎️) connector.

Overview

The P-660HN-51 is an ADSL router equipped with a four-port Ethernet switch and IEEE 802.11n wireless capability. It enables both wired and wireless clients to securely access the Internet. The integrated firewall provides protection against unauthorized network access. Additionally, it supports Quality of Service (QoS) to optimize the performance of time-sensitive services and applications.

Hardware Connections

This section details how to set up your P-660HN-51.

Connection Steps

1. DSL: Connect your P-660HN-51's DSL port (☎️) to a telephone jack or splitter using a telephone cable.
2. LAN: Connect a computer to one of the LAN ports (?) using an Ethernet cable for initial configuration and Internet access.
3. POWER: Connect the provided power adapter to the POWER socket (?) and a suitable power source. Ensure the power outlet is switched on.

Powering On and LED Indicators

After connecting the power adapter, observe the front panel lights:

• POWER (?): Blinks during startup and remains solid when the device is ready.
• DSL (☎️): Illuminates when a DSL connection is established.
• WPS (?): Indicates when the wireless LAN is ready.
• INTERNET (?): Lights up when the gateway has Internet access; blinks during data transmission or reception.
• LAN (?) (Each port): Stays on for a proper connection and blinks to indicate network traffic.

If the POWER (?), DSL (☎️), or connected LAN (?) lights are not illuminated, check your connections and cables for any damage. If the lights remain off, please contact technical support.

Set Up a Wireless Network

Using Wireless Protected Setup (WPS)

Press the WPS (?) button on the P-660HN-51's front panel for more than 5 seconds to enable the WPS function.

Follow these steps to add a WPS-enabled device to your wireless network:

1. Place the devices you intend to connect near each other.
2. Press the WPS (?) button on the P-660HN-51. The WPS (?) light will begin to blink.
3. Within 2 minutes, press the WPS (?) button on the compatible device. The WPS (?) light on the P-660HN-51 will illuminate steadily once connected.

Set Up a Wireless Network Manually

The wireless LAN on your P-660HN-51 is enabled by default. To connect a wireless client to the network, use the settings typically found on the bottom panel of your device:

• SSID: ZyXEL00561
• Security Mode: WPA-PSK
• Pre-Shared Key: FB373BD356

Configure your wireless devices to use these same wireless settings. Note that default wireless settings may vary; always refer to the information provided on your specific device's bottom panel.

Log into the Web Configurator

Your device may already be configured for Internet access. However, you may need or want to log into the P-660HN-51 Web Configurator to perform various tasks:

• Configure your Internet access settings manually.
• Customize Quality of Service (QoS) and routing features.
• Create firewall and web filter rules.
• Edit remote management settings and other advanced features.

Accessing the Configurator

1. Open your web browser and navigate to: http://192.168.1.1.
2. Enter the default user name admin and password password1, then click [Login]. If the login screen does not appear, ensure your browser allows pop-up windows, JavaScript, and Java permissions. Your computer should also be configured to obtain an IP address automatically via DHCP.
3. A welcome screen may display a summary of your last login, including the time, number of failed login attempts, and password expiration status. You can choose to see this screen on subsequent logins by selecting "Show this page next time". Click [Continue].

Changing the Login Password

It is recommended to change the default login password for enhanced security. On the subsequent screen, enter your new password in the "New Password" field, re-type it in the "Verify New Password" field, and then click [Apply]. If you prefer not to change the password at this time, leave both fields blank and click [Skip].

It is advisable to record your new password:

Network Status and Information

The "Network Map" page illustrates the Internet access status for the P-660HN-51 and any connected computers or devices. By clicking on "Status", you can view detailed information about the P-660HN-51 device, its interfaces, and system status.

Viewing Certifications

For further details on using the Web Configurator screens or setting up your Broadband connection (especially if the INTERNET (?) LED remains off), please consult your User's Guide.

To view certifications:

• Visit www.zyxel.com.
• Select your product from the drop-down list on the ZyXEL homepage to navigate to its product page.
• View certifications by selecting them on the page or by clicking the "Specifications" tab.

Customer Information Statement

This section outlines the rights and obligations of both the user and the telephone company, which will be incorporated into the final version of the manual.

Important Notes

1. If this equipment causes harm to the telephone network, the telephone company will provide advance notification of any required temporary service discontinuance. If advance notice is not practical, the company will notify the customer as soon as possible. You are also advised of your right to file a complaint with the FCC if you deem it necessary.
2. If you encounter issues with this equipment, disconnect it from the network until the problem is resolved or you are certain the equipment is functioning correctly.
3. Follow repair instructions, such as battery replacement, carefully. Do not attempt to repair or alter any parts of the device unless specifically instructed.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

For a Class B digital device or peripheral, the instructions furnished to the user shall include the following or similar statement, placed in a prominent location within the text of the manual:

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF Exposure Warning

This equipment must be installed and operated in accordance with provided instructions. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.