Key Features
- 300 Mbps 802.11n access point with 5 dBi antennas
- Standards-based WPS simplifies secure WLAN setup
- IPv6 6rd and dual stack support
- Auto-detect CenturyLink network setting configuration
- Remote provisioning, monitoring, and management via TR-069
- CenturyLink Standard GUI
Benefits
ADSL2+ High Speed Broadband Access
The PK5001Z is based on ADSL2+ standards offering fast access to the Internet while maintaining stable connections, delivering enough bandwidth for surfing the Internet. Heavy multimedia use, such as simultaneously streaming video/audio content and online-gaming, is faster and smoother with the PK5001Z.
802.11n Wireless Technology
The PK5001Z features 802.11n technology with 5 dBi antennas (2T x 2R), providing improved speed, reduced dead zones, and extended coverage. With data rates of up to 300 Mbps, the PK5001Z offers stable and reliable wireless connections for high-speed data and multimedia delivery.
Enhanced Security Features
Enhanced security ensures the protection of traffic from the WAN to the LAN. Through ZyXEL's implementation of dual Ethernet firewalls (NAT and SPI), the PK5001Z identifies and manages malicious content and applications. The PK5001Z supports WPA2/WPA/WEP and features a hardware WPS button for easy setup. These features simplify the end user's ability to set up and utilize a secure, wireless network.
TR-069 Remote Management
The PK5001Z provides DSL Forum compliant TR-069 remote management features for faster deployment by Service Providers. ZyXEL's standard onboard management options, remote provisioning, monitoring, and management features help reduce operational expenses while enhancing customer satisfaction.
IPv6 Enabled
Many North American carrier networks are migrating from IPv4 to IPv4/IPv6, creating potential issues for equipment unable to support these requirements. ZyXEL, a certified IPv6-ready vendor, provides equipment supporting dual-stack IP networks, including the PK5001Z.
Specifications
System Specifications
ADSL Compliance
- Support Multi-Mode standard (ANSI T1.413, Issue 2; G.dmt(G.992.1); G.lite(G992.2))
- ITU 992.1 (G.dmt)
- ITU 992.3 ADSL2 (G.dmt.bis)
- ITU 992.4 ADSL2 (G.lite.bis)
- ITU 992.5 ADSL2+
- T1.413
- Reach-Extended ADSL (RE ADSL) G.992.3 Annex L
- SRA (Seamless Rate Adaptation)
- Auto-negotiating rate adaptation
- ADSL physical connection ATM AAL5
- Support multi-protocol over AAL5 (RFC2684/1483)
- Support PPP over ATM AAL5 (RFC2364)
- PPP over Ethernet support for DSL connection (RFC 2516)
- Support VC-based and LLC-based multiplexing
- Support up to 8 PVCs
- I.610 F4/F5 OAM
WLAN
- IEEE 802.11n compliance, backward compatible with 11b/g
- Frequency operation: 2.4 GHz
- 64/128 bits WEP data encryption
- WPA2/WPA (Wi-Fi Protected Access) security
- 4x SSID support
- Wireless scheduler
- Wi-Fi Multimedia (WMM)
- WPS (Wi-Fi Protected Setup)
- WDS
- MAC Authentication
Router
- NAT
- SIP ALG pass-through
- NAT port forwarding
- Dynamic DNS
- DHCP server/client/relay
- RIP I/RIP II support
- IGMPv1 and v2 support
- UPnP support
- IPv6 (6rd, dual stack IPv4/IPv6, DHCPv6, PPPv6, Static IPv6)
- QoS
Firewall
- Stateful Packet Inspection (SPI)
- Denial of Service (DoS) prevention
Security
- VPN (IPSec, PPTP) pass-through
- URL blocking
Management
- Standard CenturyLink GUI
- TR-064
- TR-069 HTTPS support
- Logs and statistics
- Remote management control: Telnet, FTP, Web, SSH
- CLI command via Telnet/console
Hardware Specifications
- ADSL port (Green): 1 x RJ-14
- Phone port (Black): 1x RJ-14
- Power input (12 V DC 0.5 A)
- Reset button
- WPS button
- Two 5 dBi internal antennas
Environmental Specifications
Operating Environment
- Temperature: 0°C to 40°C
- Humidity: 20% to 85% RH (Non-condensing)
Storage Environment
- Temperature: -20°C to 60°C
- Humidity: 20% to 90% RH (Non-condensing)
Certification
- UL 60950-1
- FCC Part 15 (Class B), Part 68
- UPnP
- WPS 2.0
- K.21
Rear Panel
The rear panel of the ZyXEL PK5001Z features the following ports and buttons:
- Phone Port (RJ-14, Black): For telephone line connection.
- DSL Port (RJ-14, Green): For ADSL line connection.
- Ethernet Port: For LAN connectivity.
- Reset Button: To restore the device to factory default settings.
- Power Button/Port: For power connection.
Regulatory and compliance logos are present, including [FCC], [CE], [RoHS], and [CULUS Listed].
