Assembly Instructions
43039371-STORAGE UNIT WITH 6 TUBS WHITE
WARNING: DO NOT STAND, SIT OR LEAN ON THE UNIT. DO NOT USE THIS UNIT AS A STEP LADDER. ENSURE THIS UNIT IS USED ONLY ON A FLAT SURFACE. DO NOT USE THIS UNIT UNLESS ALL BOLTS AND SCREWS ARE FIRMLY SECURED. DO NOT PLACE HOT OBJECTS SUCH AS COFFEE CUPS DIRECTLY ON THE SURFACE OF THIS FURNITURE ITEM. THIS ITEM IS FOR STORAGE PURPOSE ONLY. FAILURE TO FOLLOW THESE WARNINGS COULD RESULT IN SERIOUS INJURY. CONTAINS SMALL PARTS. IT IS TO BE ASSEMBLED BY AN ADULT.
CARE INSTRUCTIONS:
WIPE CLEAN WITH A SOFT DAMP CLOTH. NEVER USE SCOURERS, ABRASIVES OR CHEMICAL SOLVENTS. KEEP AWAY FROM MOISTURE AND DIRECT SUNLIGHT. STORE IN A DRY PLACE FOR INDOOR USE ONLY.
MAXIMUM SAFE LOAD:
10KGS FOR TOP PANEL, 5KGS FOR BIG AND SMALL TUBS, MAXIMUM LOADING 40KGS.
Hardware list
| Identifier | Description | Quantity |
|---|---|---|
| a | 6x35mm | 48PCS |
| b | 15x10mm | 48PCS |
| c | 3x12mm | 24PCS |
| d | 6x30mm | 18PCS |
| e | 12PCS |
Assembly Overview
| Part | Quantity |
| A | 1 PC |
| B | 2 PCS |
| C | 2 PCS |
| D | 2 PCS |
| E | 6 PCS |
| F | 1 PC |
| G | 3 PCS |
| H | 3 PCS |
Note: Do not tighten the screws fully during assembly. Fully tighten screws after the final assembly steps.
Step 1
Attach part 'a' (x8) and part 'd' (x16) to panel C (x2) as shown. Ensure correct orientation indicated by checkmarks [✔️] and crosses [❌].
Step 2
Attach panels E (x4) using screws 'b' (x8) to the side panels C. Ensure the smooth side of E faces outwards.
Step 3
Attach panels E (x2) using screws 'b' (x4) to the other side panel C. Ensure the smooth side of E faces outwards.
Step 4
Attach panels E (x2) using screws 'b' (x4) to the panel F. Ensure the smooth side of E faces outwards.
Step 5
Attach panels E (x2) using screws 'b' (x8) to the side panels C. Ensure the smooth side of E faces outwards.
Step 6
Attach panel F using screws 'b' (x4) to the side panels C.
Step 7
Attach part 'a' (x4) to panel F as shown.
Step 8
Attach panels E (x2) and E (x2) using screws 'c' (x8) and part 'e' (x4) to the side panels C (x2).
Step 9
Attach panels E (x2) and E (x2) using screws 'c' (x8) and part 'e' (x4) to the side panels C (x2).
Step 10
Rotate the partially assembled unit by 90 degrees.
Step 11
Attach panel F using part 'd' (x2) to the side panels C.
Step 12
Attach panel F using part 'd' (x2) to the side panels C.
Step 13
Attach the top panel B using screws 'b' (x10) to the assembled structure.
Step 14
Attach the top panel B using screws 'b' (x10) to the assembled structure.
Step 15
Insert tubs G (x3) and H (x3) into the unit.
Step 16
Insert tubs G (x3) and H (x3) into the unit.
Step 17
Attach part 'a' (x8) to panel A as shown.
Step 18
Attach panel A to the top of the unit using screws 'b' (x10).
Step 19
Insert tubs G (x3) and H (x3) into the unit.
Step 20
Insert tubs G (x3) and H (x3) into the unit.
