Assembly Instruction
43027750 Oak Look and White Shelf With Cupboard
Important Warnings
DO NOT STAND, SIT OR LEAN ON THE UNIT. DO NOT USE THIS UNIT AS A STEP LADDER. ENSURE THIS UNIT IS USED ONLY ON A FLAT SURFACE. DO NOT USE THIS UNIT UNLESS ALL BOLTS AND SCREWS ARE FIRMLY SECURED. DO NOT PLACE HOT OBJECTS SUCH AS COFFEE CUPS DIRECTLY ON THE SURFACE OF THIS FURNITURE ITEM. THIS ITEM IS FOR STORAGE PURPOSE ONLY. CONTAINS SMALL PARTS. IT IS TO BE ASSEMBLED BY AN ADULT. FAILURE TO FOLLOW THESE WARNINGS COULD RESULT IN SERIOUS INJURY.
Care Instructions
WIPE CLEAN WITH A SOFT DAMP CLOTH. NEVER USE SCOURERS, ABRASIVES OR CHEMICAL SOLVENTS. KEEP AWAY FROM MOISTURE AND DIRECT SUNLIGHT. STORE IN A DRY PLACE FOR INDOOR USE ONLY.
Maximum Loading Weight
TOP PANEL: 5KG, SHELF: 5KG, INSIDE CUPBOARD: 10KG.
Hardware List
| Part | Description | Quantity |
|---|---|---|
| a | 4x35mm | 18pcs |
| b | 6x30mm | 22pcs |
| c | 2x16mm | 22pcs |
| d | 16pcs | |
| e | 4pcs | |
| f | 2pcs | |
| g | 3x12mm | 10pcs |
| h | 1pc | |
| i | 3x14mm | 2pcs |
| j | 4x12mm | 2pcs |
| k | 4x35mm | 2pcs |
Note: Do not tighten the screws fully during assembly. Fully tighten screws after the final assembly steps.
Assembly Steps
Step 1
Prepare the main components: top panel (1), side panels (2, 3), and base/shelf panels (5, 9). Use hardware 'g' (dowels) and 'e' (screws) for initial connections.
Visual Description: Components are laid out. Panel 1 is the top. Panels 2 and 3 are sides. Panels 5 and 9 are base/shelf elements. Hardware 'g' and 'e' are shown ready for use.
Step 2
Attach side panel (1) to base panel (9) and shelf panel (5) using hardware 'a' (screws).
Visual Description: A side panel is shown connecting to a base and a shelf panel. Screws 'a' are used at multiple points.
Step 3
Insert shelves (1, 2, 3) into the assembled frame. Use hardware 'a' and 'g' for securing.
Visual Description: The partially assembled frame is shown with three shelves being slotted into place. Screws 'a' and dowels 'g' are indicated for securing.
Step 4
Attach the back panel or a cupboard/drawer component using hardware 'b' and 'a'.
Visual Description: The unit is shown from the side. A component, possibly a drawer or cupboard base, is being slid into position and secured with screws 'b' and 'a'.
Step 5
Attach the remaining side panels and top/bottom panels using hardware 'a', 'b', 'c', 'd', 'j', and 'k'.
Visual Description: The unit is shown from the front. Remaining side panels and top/bottom pieces are being attached. Various screws ('a', 'b', 'c', 'd', 'j', 'k') are shown being used for these connections.
Step 6: Wall Anchoring
Secure the unit to the wall using the provided wall fixings (hardware 'd' and 'k' are indicated). Multiple fixing points are shown along the top and sides of the unit.
Visual Description: The unit is shown from the back, positioned against a wall. Screws 'd' and 'k' are used to attach it to the wall at several points. Close-up views show screws entering the wall.
USER INSTRUCTION FOR WALL ANCHOR
IT IS STRONGLY RECOMMENDED THAT THIS PRODUCT IS PERMANENTLY FIXED TO THE WALL. PLEASE SEEK PROFESSIONAL ADVICE IF YOU ARE IN DOUBT OF WHAT FIXING DEVICE TO USE. REGULARLY CHECK THAT ANCHORS ARE SECURELY MAINTAINED. CAUTION: FOR YOUR SAFETY WHEN ATTACHING THE ANCHOR FIXINGS, PLEASE NOTE THE FOLLOWING: CHECK ANY ELECTRICAL WIRES OR PLUMBING INSIDE THE WALL BEFORE DRILLING ANY HOLES. (IF YOU ARE UNSURE PLEASE SEEK PROFESSIONAL ADVICE FROM A QUALIFIED TRADESPERSON).
WARNING: PLEASE SECURE YOUR FURNITURE WITH THE SUPPLIED WALL FIXING. SCAN THE CODE [QR code for more information] FOR MORE INFORMATION. [Toppling Hazard]
