Smart WiFi LED Controller USER GUIDE

Introduction

The Shelly RGBW2 WiFi LED Controller by Allterco Robotics is designed for direct installation with LED strips/lights to control color and dimming. It can function as a standalone device or integrate with home automation systems.

Shelly devices offer remote control of electrical appliances via mobile phone, PC, or home automation systems using WiFi. They can operate locally or remotely via the internet through Shelly Cloud services.

The device features an integrated web server for adjustment, control, and monitoring, with two WiFi modes: Access Point (AP) and Client Mode (CM).

Specification

Power Supply: 12 or 24V DC

Power Output (12V): 144W (combined), 45W (per channel)

Power Output (24V): 288W (combined), 90W (per channel)

EU Standards Compliance: RE Directive 2014/53/EU, LVD 2014/35/EU, EMC 2004/108/WE, RoHS2 2011/65/UE

Working Temperature: -20°C to 40°C

Radio Signal Power: 1mW

Radio Protocol: WiFi 802.11 b/g/n

Frequency: 2400 – 2500 MHz

Operational Range: Up to 20m outdoors, up to 10m indoors (depending on construction)

Dimensions (HxWxL): 43 x 38 x 14 mm

Electrical Consumption: < 1 W

Technical Information

Control via WiFi from mobile phone, PC, automation system, or any device supporting HTTP/UDP.
Microprocessor management.
Controlled elements: multiple white and color (RGB) LED diodes.
Can be controlled by an external button/switch.

⚠️ CAUTION! Danger of electrocution. Mounting to the power grid requires caution.

⚠️ CAUTION! Keep devices for remote control (phones, tablets, PCs) away from children. Do not allow children to play with connected buttons/switches.

Installation Instructions

⚠️ CAUTION! Installation should be performed by a qualified person (electrician).

⚠️ CAUTION! Voltage may be present across clamps even when the device is off. Ensure power is disconnected before making connections.

⚠️ CAUTION! Do not connect to appliances exceeding the maximum load.

⚠️ CAUTION! Connect only as shown in instructions to avoid damage or injury.

⚠️ CAUTION! Read all documentation carefully before installation. Failure to follow procedures may lead to malfunction, danger, or legal violation. Allterco Robotics is not responsible for loss or damage due to incorrect installation or operation.

⚠️ CAUTION! Use only with power grids and appliances complying with applicable regulations. Short circuits may damage the device.

RECOMMENDATION: Connect and control electric circuits/appliances only if they comply with relevant standards and safety norms.

Initial Inclusion:

Ensure the power grid is off before installation.
Connect Shelly to the power grid following the wiring scheme (described as Figure 1 in the original document, showing connections for Power Supply DC, GND, Switch Input (I), and RGBW channels).
You can use Shelly with the Shelly Cloud mobile application or via its embedded web interface.

Voice Control: Shelly devices are compatible with Amazon Echo and Google Home. Guides available at: https://shelly.cloud/compatibility/Alexa and https://shelly.cloud/compatibility/Assistant.

Mobile Application for Management of Shelly®

The Shelly Cloud app allows control and adjustment of Shelly devices globally via internet connection.

Install the app from Google Play (Android, represented by a Google Play icon) or the App Store (iOS, represented by an App Store icon).

Registration: Create an account to manage Shelly devices. A valid email is required for password recovery.

Forgotten Password: Use the registered email address to reset your password.

Device Inclusion Steps (using Shelly Cloud App):

Step 1: After installation and power-on, Shelly creates its own WiFi Access Point (AP) (e.g., shellyrgbw2-35FA58). If not, reset the device (power cycle and press switch 5 times, or press reset button once; LED will flash, then power cycle again).
Step 2: In the app, select "Add Device". Enter the WiFi network name (SSID) and password for your home network.
Step 3:
- iOS: Press the home button, go to Settings > WiFi, and connect to the Shelly WiFi network (e.g., shellyrgbw2-35FA58).
- Android: The phone/tablet automatically scans and includes Shelly devices on the connected WiFi network.
Step 4: A pop-up confirms successful device inclusion.
Step 5: A list of discovered devices appears in the "Discovered Devices" room (approx. 30 seconds after network discovery).
Step 6: Select the device, enter a name, choose a room, and optionally add an icon or picture. Press "Save Device".
Step 7: Press "YES" to enable Shelly Cloud service for remote control and monitoring.

Shelly Device Settings: Control and automate devices via the app. Use ON/OFF buttons, click device name for details, edit appearance, and settings.

Work Modes

The Shelly RGBW2 supports two modes:

Color Mode: Choose from a full color gamma. Includes 4 predefined colors (Red, Green, Blue, Yellow) and a dimmer slider for brightness.
White Mode: Four separate channels, each with an On/Off button and a dimmer slider for individual brightness control.

The Embedded Web Interface

Control and set up Shelly devices via a web browser without the mobile app. Connect to the device's WiFi network (AP mode) and navigate to its IP address (e.g., 192.168.33.1).

Abbreviations:

Shelly-ID: Unique device name (e.g., 35FA58).
SSID: WiFi network name created by the device (e.g., shellyrgbw2-35FA58).
Access Point (AP): Device creates its own WiFi connection point.
Client Mode (CM): Device connects to an existing WiFi network.

Initial Inclusion via Web Interface:

Step 1: Install and power on the Shelly device. It creates its own WiFi network (AP). (Refer to reset instructions if AP is not created).
Step 2: Connect your phone, tablet, or PC to the Shelly WiFi network (SSID).
Step 3: Open a web browser and type 192.168.33.1 to access the web interface.

Home Page: Displays current work mode, state (on/off), brightness, power button, cloud connection status, time, and settings.

Settings:

Edit Device: Change Device Name, Room, Picture.
Timer:
- Auto OFF: Automatically shuts down after a set time (0 cancels).
- Auto ON: Automatically turns on after a set time (0 cancels).
Weekly Schedule: Turn devices on/off automatically at predefined times (requires internet connection).
Sunrise/Sunset: Turn devices on/off automatically based on sunrise/sunset times (requires internet connection).
Internet/Security:
- WiFi Mode: Client (connect to existing network) or Access Point (create new network).
- Cloud: Enable/Disable cloud service connection.
- Restrict Login: Set username and password for web interface access.
Power On Default Mode: Set default state (ON, OFF, or Restore Last Mode) upon power restoration.
Firmware Update: Update device firmware when new versions are available.
Time Zone and Geo-location: Enable/disable automatic detection.
Factory Reset: Restore device to default settings.
Device Reboot: Restart the device.
Device Information: View Device ID and IP address.

Additional Features:

Shelly allows control via HTTP from other devices or servers. For REST control protocol information, visit https://shelly.cloud/developers/.

Environmental Protection

Dispose of the device, accessories, and packaging at designated recycling locations. Do not dispose of batteries with household waste.

Warranty Terms

Warranty Period: 24 months from the date of purchase by the End User.

Validity: EU territory, in compliance with applicable laws and user rights.

Manufacturer: Allterco Robotics EOOD, Sofia, Bulgaria.

Claims: Address claims regarding conformity to the Seller. Damages related to defective products should be claimed against the Manufacturer.

Contact for Support: support@shelly.cloud. Contact manufacturer before sending for servicing.

Warranty Exclusions: The warranty does NOT cover damages resulting from:

Inappropriate use, wiring, or exceeding load/current limits.
Non-compliance with warranty card/receipt requirements or forgery.
Unauthorized self-repair, modification, or adaptation.
Improper handling, storage, or transportation, or non-observance of instructions.
Use of non-standard power supply, network, or faulty devices.
Force majeure events (floods, storms, fire, natural disasters, war, etc.), accidents, robbery, water damage, ingress of liquids, extreme temperatures, air pollution.
Mechanical damage (impacts, falls, scratches, deformations) from wrong use.
Exposure to severe outdoor conditions (high humidity, dust, extreme temperatures).
Lack of user maintenance as specified in the manual.
Use of faulty or non-recommended accessories, or non-original spare parts.
Faulty software, computer viruses, or incorrect software updates.

Limitations: Warranty repairs do not include routine maintenance. Wear and tear are not covered. Manufacturer is not liable for property damage or indirect damages (loss of profits, etc.).

Manufacturer Information

Manufacturer: Allterco Robotics EOOD

Address: Sofia, 1407, 103 Cherni vrah blvd.

Tel: +359 2 988 7435

Email: support@shelly.cloud

Website: http://www.Shelly.cloud

Declaration of Conformity available at: https://Shelly.cloud/declaration-of-conformity/

Latest user guide available at: https://shelly.cloud/downloads/

All rights to trademarks and intellectual property belong to Allterco Robotics EOOD.

	Shelly RGBW 2 Smart WiFi LED Controller User Guide Comprehensive user guide for the Shelly RGBW 2 Smart WiFi LED Controller, covering installation, setup via mobile app and web interface, work modes, specifications, and warranty information.
	Shelly RGBW2 LED Controller: User and Safety Guide Comprehensive user and safety guide for the Shelly RGBW2 WiFi LED Controller by Allterco Robotics. Learn about its specifications, technical information, installation instructions, and safety precautions for controlling RGBW LED lighting.
	Shelly RGBW2 LED Controller User and Safety Guide Comprehensive user and safety guide for the Shelly RGBW2 WiFi LED Controller, detailing specifications, installation, and safe operation for smart home lighting.
	Shelly RGBW2 Smart WiFi LED Controller User Guide User guide for the Shelly RGBW2 Smart WiFi LED Controller, detailing its specifications, installation, mobile app integration, and embedded web interface for controlling LED lighting.
	Shelly Smart WiFi LED Dimmer User Guide - Installation, Setup, and Features Comprehensive user guide for the Shelly Smart WiFi LED Dimmer. Covers installation, wiring diagrams, mobile app setup via Shelly Cloud, device settings, technical specifications, and warranty information for smart home lighting control.
	Shelly RGBW2 WiFi LED Controller User Guide Comprehensive guide to installing, configuring, and using the Shelly RGBW2 WiFi LED controller, including setup with the Shelly Cloud app, voice control compatibility, and advanced settings.
	Shelly Plus RGBW PM: Smart Wi-Fi/Bluetooth RGBW Controller with Power Measurement Comprehensive guide to the Shelly Plus RGBW PM, a versatile Wi-Fi and Bluetooth-enabled RGBW controller for smart lighting. Features include power monitoring, advanced scheduling, local control, and integration with major smart home platforms.
	Shelly Dimmer 2 User Guide: Smart WiFi Dimmer Switch Installation & Setup Learn how to install, set up, and use the Shelly Dimmer 2 smart WiFi dimmer switch. This comprehensive guide covers specifications, wiring, mobile app integration, web interface control, and warranty information for smart home lighting.