NUX Mighty Plug Pro MP-3: Guitar and Bass Amp Modeling Earphone Amplug
Thank you for purchasing the NUX Mighty Plug Pro. This versatile amp modeling amp-plug offers enhanced features and a more professional experience.
Overview
The Mighty Plug Pro provides a variety of effects for electric guitar and bass guitar, including amp modeling and cabinet IRs. It also features acoustic amp modeling and acoustic IRs to simulate acoustic guitar sounds. You can load 3rd party IRs through the Mighty Editor™ software to expand your tone options. The Mighty Editor™ software will automatically convert WAV format IRs to 32bits/48kHz for the device.
Note: There are 34 default IRs, and user IR slots are 20 (from 35 to 54).
You can customize presets via the Mighty Amp™ App (mobile) or Mighty Editor™ software (PC).
Control Panel & I/O Jacks
The device features a 1/4" (6.35mm) phone plug, VOLUME buttons, APP button, AUDIO indicator, BATTERY indicator, POWER/MUTE button, PRESET switch & indicator, RESET hole, USB-C port, and a 1/8" (3.5mm) stereo headphone output.
The 1/4" (6.35mm) phone plug is sturdy and flexible, fitting securely into guitar and bass output jacks. It is designed to not block the whammy bar on Stratocaster type guitars.
POWER/MUTE button
Hold the POWER/MUTE button for 2 seconds to turn the device on or off. A short press mutes the headphone output while the PRESET switch indicator flashes.
VOLUME +/- buttons
Press VOLUME + to increase headphone volume, and VOLUME - to decrease it.
PRESET switch & indicator
Press the PRESET switch to cycle through 7 presets. The indicator color changes with each preset. You can select which presets are active via the Mighty Amp™ App or Mighty Editor™ software.
Mighty Amp™ App & Mighty Editor™ Software
The Mighty Amp™ App and Mighty Editor™ software allow you to tweak all signal blocks and parameters. The Mighty Plug Pro offers GATE, COMP, EFX, AMP, IR, EQ, MOD, DLY, and RVB effect blocks with adjustable order. In addition to 34 built-in IRs, there are 20 slots for 3rd party IRs. The Mighty Editor™ software automatically converts WAV(IR) sample rates.
The Mighty Plug Pro can be used as a USB recording interface, supporting Normal / Dry Out / Re-amp / Loopback routing. You can adjust these settings via the Mighty Amp™ App or Mighty Editor™ software. Loopback mode is ideal for live streaming.
The Mighty Editor™ software also includes an IR file format converter.
Indicators
BATTERY indicator
Shows charging status: Red while charging, turns off when fully charged. Flashes red when battery is low. Charging time is approximately 2.5 hours. Operation time is approximately 5 hours.
App indicator
Turns blue when the Mighty Amp™ App connects to the device. To connect, launch the app, go to Settings > Current Amp, select "MIGHTY PLUG PRO", then "click to scan devices". Once found, click it to connect.
AUDIO indicator
Turns blue when a mobile phone or other player connects via Bluetooth audio. To connect, go to your phone's Bluetooth settings and select "MIGHTY PLUG PRO".
Note: Bluetooth audio and Bluetooth MIDI are independent and require separate connections.
Ports and Connections
RESET port
Use a paperclip or SIM card tool to press the RESET port to reboot the device if it freezes.
1/8" (3.5mm) stereo headphone output
Connect headphones for silent practice. Supports TRRS earbuds with mic. The microphone can be engaged via the Mighty Amp™ App or Mighty Editor™ software for live streaming.
Note: Microphone input is streamed via USB audio when activated.
USB-C port
Used for charging, Mighty Editor™ software communication, USB audio streaming, and firmware updates. Charging time is approximately 2.5 hours with a 5V/1A charger or PC USB port.
Recording:
For Windows users, download the ASIO driver from the product page. Mac users can utilize CORE AUDIO without additional drivers.
Connections for Use Cases
Silent Practice
Connect the Mighty Plug Pro to your guitar, plug in headphones, and play without disturbing others. Jam with backing tracks via Bluetooth audio stream from a mobile device.
Recording
Connect to your PC via USB to use the Mighty Plug Pro as a portable recording interface.
Live Stream
Use the phone out with TRRS headset or earbuds with a mic. Choose Loopback USB routing for live streaming with your PC or mobile phone (USB On-The-Go).
Features
- Compact and powerful amp modeling headphone amplifier.
- TSAC-HD (White-Box) Amp Modeling algorithm for realistic playing feel and feedback.
- Supports 512 samples IR (Impulse Response) files, with 34 factory presets and 20 user slots for 3rd party IRs.
- 7 presets with user-selectable active functions.
- 9 effect modules with customizable effect chains.
- Physical volume control buttons.
- High-quality headphone output preamp supports TRRS headset or headphone microphone input.
- 3.7V/1450mAh battery provides up to 5 hours of continuous use.
- Ultra-low system latency: 1.2ms.
- Dynamic range: 103dB.
- Intuitive Mighty Amp™ App and Mighty Editor™ software for tone editing.
Specifications
- Input Impedance: 1MΩ
- Headphone Output Impedance: 10Ω
- Dynamic Range: 103dB
- Sampling Rate: 48kHz / 32bit
- System Latency: 1.2ms
- Charging Power: 5V USB-C
- Battery: 3.7V / 1450mAh
- Current Draw: 4V / 260mA
- Dimensions: 81mm(L) x 41mm(W) x 30mm(H)
- Weight: 70g
Accessories
- Owner's manual
- Warranty card
- USB cable
*Specifications are subject to change without notice.
Safety Instructions
WARNING
To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
IMPORTANT SAFETY INSTRUCTIONS
- Use only the supplied power supply or power cord.
- Do not place near heat sources.
- Guard against objects or liquids entering the enclosure.
- Do not attempt to service this product yourself. Refer all servicing to qualified service personnel.
- Unplug the power supply cord when the unit is unused for long periods.
- Protect the power cord from being walked on or pinched.
- Prolonged listening at high volume levels may cause hearing loss. Practice safe listening.
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure statement. The device can be used in portable exposure condition without restriction.
Environmental Information
RoHS Compliance
This document provides information on the presence of specific hazardous substances in the product, in accordance with Chinese environmental regulations.
Environmental Use Period
The symbol indicates the environmental use period for electronic information products sold in China. It signifies that the product does not contain hazardous substances that will cause serious environmental pollution or adverse effects on human health and property within its specified service life, provided the product is used according to the instructions.
Name and Content of Hazardous Substances
| Part Name | Lead (Pb) | Mercury (Hg) | Cadmium (Cd) | Hexavalent Chromium (Cr(VI)) | Polybrominated Biphenyls (PBB) | Polybrominated Diphenyl Ethers (PBDE) |
|---|---|---|---|---|---|---|
| Plastic parts | X | ○ | ○ | ○ | ○ | ○ |
| Metal parts | ○ | ○ | ○ | ○ | ○ | ○ |
| Main body (Silicone parts) | X | ○ | ○ | ○ | ○ | ○ |
| Internal circuit board | ○ | ○ | ○ | ○ | ○ | ○ |
| Accessories (Power adapter, cable) | X | ○ | ○ | ○ | ○ | ○ |
○: Indicates that the content of the hazardous substance is below the limit requirement specified in GB/T 26572.
X: Indicates that the content of the hazardous substance is above the limit requirement in at least one homogeneous material of the part. Due to current technological limitations, there is no substitute for this substance.
*The information in this table applies only when the product contains these items.
This table is compiled in accordance with SJ/T 11364.
Environmental Protection
When disposing of this product, please follow local guidelines and do not discard it as household waste to prevent environmental pollution.
Quality Assurance
Warranty Policy
For any quality issues within 7 days of purchase, return for refund or exchange is possible. Within 1 month, exchange is available for quality issues. Lifetime consultation and repair services are provided.
Repair Policy
Exchange Policy: Products purchased through authorized channels can be exchanged within 1 month of purchase if they have non-human-induced performance failures and are in good cosmetic condition. Proof of purchase is required.
Warranty Policy: Products purchased through authorized channels are eligible for free repair for non-human-induced performance failures within 1 year of purchase. Paid repair services are available for issues beyond the warranty period or caused by external factors.
*This after-sales policy is applicable to mainland China. Other countries and regions are subject to local policies and laws.
Certificate of Conformity
This product has been inspected and approved.
| Inspector: | [Inspector Name] |
| Date of Manufacture: | [Date] |
| Name: | Guitar and Bass Amp Modeling Earphone Amplifier |
| Model: | MP-3 |
| Type: | MP-3 |
| Standard: | Q/WKDZ 001-2020 |
| Certificate: | Product is certificated with Q/WKDZ 001-2020 |
Manufacturer: Cherub Technology Co., Ltd.
Manufacturer Address: [Address]
Website: www.nuxefx.com
