AstroAI 6L User Manual - Mini Fridge with Mirror
Thank you for purchasing the AstroAI 6L Mirror Mini Fridge. This manual contains important information regarding the safety, operation, maintenance, and storage of this product. Please read and understand all warnings, instructions, and labels before use. Keep this manual for future reference.
For questions or concerns, please contact AstroAI at support@astroai.com.
Safety Information
- Connect the device to a 220V power source. (Note: Different countries have different voltages. Choose the product that matches your actual situation when purchasing.)
- When using a 12V vehicle power supply, do not connect the refrigerator for extended periods when the engine is not running.
- Do not connect directly to the 24V cigarette lighter socket of heavy-duty vehicles.
- Unplug the device during thunderstorms or when not in use for extended periods to prevent damage.
- Do not open or remove the cover, as this may expose you to danger.
- To avoid the risk of fire or electric shock, avoid overloading wall outlets, extension cords, or other devices that support electrical loads.
- Use a suitable power source: plug the product into an appropriate power source according to the instructions in the manual or on the product label.
- The power supply voltage must be the same as the voltage indicated in the manual and on the equipment nameplate.
- To completely disconnect the device from the power supply, turn off the power and unplug the power supply completely.
- Do not bend, stretch, or pull the power cord to avoid electric shock.
- When installing, the power outlet should be easily accessible.
- Avoid using in locations where the fan may draw in dust or other air contaminants.
- Do not place the refrigerator in poorly ventilated areas, such as a car trunk.
- Handle with care; do not squeeze, do not turn upside down.
- Do not sit on the refrigerator.
- Leave a distance of at least 2 inches (5.08 cm) from the back and sides of the device to allow for air circulation and heat dissipation.
- Before switching from heating mode to cooling mode, turn off the refrigerator for 30 minutes to allow it to return to room temperature, and vice versa.
- Do not expose the product to rain and keep it away from corrosive gases and liquids.
- When not in use for a long time, disconnect the power supply and store it in a dry, ventilated environment, avoiding direct sunlight.
- It is strictly prohibited for children to use it alone; children must use it under adult supervision.
Symbol Description
- (1) Handle
- (2) Door Latch
- (3) Light Bar
- (4) Light Bar Switch
- (5) Cooling Indicator
- (6) Heating Indicator
- (7) Cooling/Off/Heating Switch
- (8) Non-ECO Mode / ECO Mode
- (9) DC Power Interface
- (10) AC Power Interface
- (11) Partition
- (12) Shelf
- (13) AC Power Cable
- (14) DC Power Cable
Size Description
External Dimensions: 27 cm (Width) x 19.5 cm (Depth) x 30 cm (Height)
Internal capacity for 330ml cans.
Instructions
I. Car Operation Instructions
Suggestion: Do not remove the protective film from the mirror surface when frequently used in the car, as it is intended to prevent dirt on the mirror surface.
- Before inserting the power cable connector into the socket, switch the mode button to the Off position (the middle gear of the cooling/off/heating switch). At this time, the two indicator lights will not be illuminated.
- Plug the power cable into the DC power connector on the back of the refrigerator.
- Secure the refrigerator in the required position and then plug the power cable into the vehicle's power outlet.
- Turn the cooling/heating switch to either cooling or heating. In cooling mode, the green indicator light will be on; in heating mode, the red indicator light will be on.
- The height of the partition inside the refrigerator can be adjusted according to the size of the items being stored.
Consideration:
Operating the refrigerator when the vehicle is turned off may drain the vehicle's battery.
II. Home Operation Instructions
- Remove the protective film from the mirror surface before use to avoid affecting the line of sight. Clean the mirror surface after prolonged use to ensure the best effect. Refer to the manual for detailed mirror cleaning and maintenance methods.
- Before inserting the power cable connector into the socket, first switch the mode button to the Off position (the middle gear of the cooling/off/heating switch). At this time, the two indicator lights will not be illuminated.
- Plug the power cable into the AC power connector on the back of the refrigerator.
- Secure the refrigerator in place and plug the power cable into a standard wall outlet.
- Turn the cooling/heating switch to cooling or heating. In cooling mode, the green indicator light will be on; in heating mode, the red indicator light will be on.
- When using the mirror, you can touch the light bar switch to adjust the brightness.
- The height of the partition inside the refrigerator can be adjusted according to the size of the items being stored.
ECO Mode
- ECO mode is an energy-saving mode. The minimum cooling temperature in this mode is higher than in non-ECO mode, the cooling speed is slower, and the noise level is significantly lower than in non-ECO mode.
- The refrigerator defaults to a mode. If you find the noise too high, you can switch from non-ECO mode to ECO mode. If you feel the cooling is insufficient, you can switch from ECO mode to non-ECO mode.
Cooling Mode Reminder
- For the fastest cooling speed, fill the refrigerator with pre-chilled beverages.
- It can be used not only for cooling beverages but also for refrigerating skincare products and cosmetics.
- The cooling effect is affected by the ambient temperature. Excessive ambient temperature may cause the minimum temperature the refrigerator can reach to increase.
Heating Mode Indication
- The refrigerator is designed to maintain the temperature of food. It is not designed to heat objects.
- As long as the door is closed properly, hot items will remain warm for several hours after the refrigerator is turned off.
Care and Maintenance
- Before performing routine maintenance, ensure the device is completely unplugged.
- Use a damp cloth and mild detergent to clean the casing.
- When not in use, ensure the interior is completely dry before storing.
- Place the handle upwards and do not squeeze it.
Mirror Cleaning
- Use hand sanitizer to clean the mirror thoroughly.
- Cleaning with a soft cloth or gauze dampened with kerosene or wax is also very effective.
- You can also clean the mirror with a cloth dampened with milk.
- Apply soap to the mirror surface and wipe with a dry cloth.
- Cleaning with an astringent lotion or detergent can also achieve a cleaning effect.
Troubleshooting
Problem | Solution |
---|---|
Does not work |
|
Poor heat dissipation |
|
No cooling |
|
Condensation |
|
Light does not illuminate |
|
Parameter Description
Mini Fridge | |||
---|---|---|---|
Model | LY2006A | ||
Capacity | 6 L | ||
Operating Temperature | Below ambient temperature 18-20°C | 140°F (60°C) Warm | ||
Input Voltage | DC12V | Cooling Mode: 40W | Heating Mode: 32W |
AC100 - 120V (USA) | Cooling Mode: 0.7A 50/60Hz | Heating Mode: 0.63A 50/60Hz | |
AC100 - 110V (JP) | Cooling Mode: 50W 50/60Hz | Heating Mode: 40W 50/60Hz | |
AC200 -240V (DE/UK/FR/ES) | Cooling Mode: 50W 50/60Hz | Heating Mode: 40W 50/60Hz | |
Certifications | ETL / CE / PSE / UKCA / RoHS | ||
Class II Construction | ☐ |
AstroAI 1-Year Limited Warranty
Each AstroAI 6L Mirror Mini Fridge is warranted to be free from defects in material and workmanship. This warranty does not cover damage caused by negligence, misuse, contamination, alteration, accident, or abnormal conditions of operation or handling. This warranty covers the original purchaser only and is non-transferable.
AstroAI always aims to provide customers with excellent products as well as customer service. To learn more about AstroAI, please visit astroai.com.