Xiaomi Dust Mite Vacuum Cleaner

Safety Instructions

Read this manual carefully before use, and retain it for future reference.

WARNINGS

• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
• The plug must be removed from the socket-outlet before cleaning or maintaining the appliance.
• The dust mite vacuum cleaner comes with a UV light. Do not expose the eyes or skin of humans or animals to UV radiation; otherwise, it may cause damage.
• To prevent burns, do not touch the UV light with your hands during use or immediately after it is turned off.
• Before cleaning the UV light, make sure the dust mite vacuum cleaner is powered off and avoid pressing the power button during cleaning. Otherwise, the dust mite vacuum cleaner may suddenly start and cause damage.
• Do not touch the plug or any part of the dust mite vacuum cleaner with wet hands.
• Do not use the dust mite vacuum cleaner to vacuum water, any flammable or explosive liquids like gasoline, or any solutions containing toxic and harmful ingredients such as chlorine bleach, ammonia, and drain cleaner.
• Do not use the dust mite vacuum cleaner to vacuum drywall particles, ashes like fireplace ash, or smoking or burning materials such as coal, cigarette butts or matches.
• Do not use the dust mite vacuum cleaner to vacuum hard or sharp objects, such as glass, nails, screws, or coins, which may damage the product.
• Keep the dust mite vacuum cleaner away from heating appliances and direct sunlight to prevent fires.
• Avoid using the dust mite vacuum cleaner for a long time if the suction inlets, heat dissipation vent, or hot air outlet is blocked. Otherwise, the cleaner may be damaged.
• To prevent personal injury, do not touch the tapping module with your hands during use.
• Only use accessories and replacement parts that are approved by Xiaomi.
• The dust mite vacuum cleaner is solely intended for cleaning and removing dust mites from home textiles like mattresses, blankets, pillows, and sofas. Do not use it for other purposes.
• Do not leave the dust mite vacuum cleaner running in the same position for a long time, or items may be damaged.
• Keep the power cord away from sharp objects that may damage it.
• Do not place the dust mite vacuum cleaner on unstable surfaces of objects, such as chairs or tables, to prevent damage or personal injury caused by its falling off.
• If the dust mite vacuum cleaner gives off smoke or odors, or produces powders from the heat dissipation vent during use, stop using and unplug it immediately, and contact the after-sales service team.
• Never attempt to disassemble the dust mite vacuum cleaner by yourself. Contact an authorized service center if it needs repairs.
• ⚠️ WARNING - This appliance contains a UV emitter. Do not stare at the light source.

Package Contents

• Dust Mite Vacuum Cleaner
• User Manual
• Warranty Notice

Product Overview

The product consists of the following parts:

• Handle: The grip for holding and maneuvering the device.
• Dust Mite Vacuum Cleaner Body: The main unit of the appliance.
• Heat Dissipation Vent: An opening for releasing heat.
• Hot Air Outlet: An outlet for hot air.
• Power Button: The button to turn the device on and off.
• Dust Compartment: The container for collecting dust and debris.
• Dust Compartment Release Button: A button to detach the dust compartment.
• Tapping Module: A component designed to agitate dust mites.
• Roller: Rotating wheels that help move the device and activate sensors.
• Suction Inlet: The opening where dust and debris are drawn into the device.
• UV Light: An ultraviolet light source for sanitization.
• Power Cord: The cable for connecting the device to a power source.

How to Use

Turning on/off

• Connect the dust mite vacuum cleaner to power, and press its power button to turn it on.
• When the dust mite vacuum cleaner is turned on, press its power button to turn it off. Turn off and unplug it after each use.

Using

• Turn on the dust mite vacuum cleaner, place it on the textile surface, and slightly press it while slowly moving it. The rollers will trigger the micro switch to turn on, and the UV light and tapping modules will start working.
• Take the dust mite vacuum cleaner away from the textile surface; the rollers go back to their original position, the micro switch turns off, and then the UV light and tapping modules stop working.

Notes:

• The micro switch is inside the dust mite vacuum cleaner and is invisible.
• During use, hot air will come out from the heat dissipation vent.
• For first-time use, it is normal for a slight odor to come from the cooling vent; the odor will naturally dissipate after a period of use.
• When the dust mite vacuum cleaner is turned on but does not contact the textile, it is normal for the UV light and tap module to stop operating.

Care & Maintenance

General Warning: Before cleaning or maintaining the dust mite vacuum cleaner, turn it off and unplug it.

Dust Compartment Assembly

The dust compartment assembly includes:

• Dust Compartment: Collects dust.
• Cyclone Separator: Separates dust.
• Filter: Filters fine particles.
• Filter Bracket: Holds the filter.

Daily Cleaning of the Dust Compartment Assembly

1. Press and hold the dust compartment release button, and simultaneously pull out the dust compartment assembly.
2. Lift the cyclone separator assembly over a trash bin, empty the dust compartment, and clean the surface of the cyclone separator assembly with a cloth.
3. After cleaning, reinstall the cyclone separator assembly back into the dust compartment.
4. Align the triangular notch of the dust compartment assembly with the triangular protrusion on the dust mite vacuum cleaner, then push the dust compartment assembly into the vacuum cleaner. It is properly installed when you hear a "click" sound.

Washing the Dust Compartment Assembly

If suction decreases, clean the dust compartment assembly promptly to regain mite removal performance and prevent air duct blockage.

1. Remove the dust compartment assembly and take out the cyclone separator assembly. Hold the filter bracket and rotate the cyclone separator counterclockwise to remove it.
2. Rotate the filter counterclockwise to remove it.
3. Clean the surfaces of the dust compartment, cyclone separator, filter, and filter bracket. Rinse them with clean tap water, and then air-dry them thoroughly (away from direct sunlight).
4. After cleaning and fully drying, reinstall the filter and cyclone separator into the filter bracket clockwise in order. Then place the cyclone separator assembly into the dust compartment and press it firmly.
5. Reinstall the dust compartment assembly back into the dust mite vacuum cleaner.

Notes on Washing:

• It is recommended to wash and clean the filter every 5 to 6 vacuuming sessions, or adjust frequency as needed.
• It is recommended to replace the filter every 2-3 months for optimal vacuuming performance.
• Rinse the filter and the air inlet filter cotton with clean water. To prevent damage, do not rub, scrub, or wash them with hands or sharp objects like brushes.
• After rinsing, ensure components are thoroughly air-dried (away from direct sunlight) before re-installation.

Cleaning the Suction Inlets

Remove the dust compartment assembly and flip the dust mite vacuum cleaner. There are two suction inlets: the bottom one and the one on the dust compartment. Use a dry cloth or tissue to clean the dust from these inlets.

Notes on Suction Inlets:

• It is normal for dust and other particles to adhere to the two suction inlets. Clean them in a timely manner.
• The air inlet filter cotton functions as a filter and should not be discarded. If it becomes dirty, remove and rinse it with clean tap water. Ensure it is thoroughly air-dried (away from direct sunlight) before reinstallation.

Specifications

Troubleshooting

Notes:

• In the event of a malfunction during use, turn off and unplug the dust mite vacuum cleaner before troubleshooting.
• If the issue persists after following the above steps, please contact the after-sales service team.

Regulatory Compliance Information

WEEE Disposal and Recycling Information

All products bearing this symbol ?️ are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points.

EU Declaration of Conformity

CE Guangdong Deerma Technology Co., Ltd., hereby declare that this equipment is in compliance with the applicable Directives and European Norms, and amendments. The full text of the EU declaration of conformity is available at the following internet address: http://www.mi.com/global/service/support/declaration.html

For detailed e-manual, please go to www.mi.com/global/service/userguide

Manufacturer Information

For further information, please go to www.mi.com

Manufactured for: Xiaomi Communications Co., Ltd.

Manufactured by: Guangdong Deerma Technology Co., Ltd. (a Mi Ecosystem company)

Address: No.4-1 Longhui Road, Malong Village Committee, Beijiao Town, Shunde District, Foshan City, Guangdong Province, China

User Manual Version: V4.0

Contact Information

EU REP: Xiaomi Technology Netherlands B.V., Prinses Beatrixlaan 582, 2595BM, The Hague, The Netherlands, contact@support.mi.com

UK REP: Xiaomi Technology UK Limited, Davidson House, Forbury Square, Reading, Berkshire RG1 3EU, contact@support.mi.com