Mi Handheld Vacuum Cleaner User Manual

Safety Information

Read this manual carefully before use, and retain it for future reference.

Usage Restrictions

• Do not use this vacuum in outdoor, commercial, or industrial environments. It is intended for home and in-car use only.
• Do not store the vacuum anywhere in the car to avoid high or low temperatures affecting its battery life.
• Do not use the vacuum in environments with high humidity, or temperatures above 40°C or below 3°C.
• Children should be supervised to ensure that they do not play with the appliance.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. (CB)
• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. (EU)
• Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
• While using an electric brush head, keep limbs and pets away from the rotating brush heads to avoid injury.
• Do not touch the power supply, nor operate the product with wet hands to prevent injuries.
• Do not vacuum any liquids (such as water, cola).
• Do not vacuum any burning or smoking substances (such as non-extinguished cigarette butts).
• Do not vacuum any hard or pointy objects (such as building materials, glass, and nails).
• Please use this product in accordance with the instructions in the User Manual. Users are responsible for any loss or damage that may arise from improper use of this product.
• This product is only to be used in areas below 3,000 meters above sea level.

Battery & Charging

WARNING

• This product contains batteries that are only replaceable by skilled persons.
• This product can only be charged using an ATC01RR or BTC01RR power supply.
• Do not use any third-party batteries, power adapters or docking stations.
• Do not disassemble, repair or modify the battery, power adapter or the docking station.
• Do not charge the vacuum or install the docking station near heat sources or in humid areas (such as radiators or bathrooms).
• Do not wipe the adapter or the docking station with a wet cloth, nor touch them with wet hands.
• If the power cord is damaged or broken, immediately stop using it and contact after-sales service.
• If the vacuum is not going to be used for an extended period of time, please fully charge it, unplug its power supply, and place it in a cool and dry place. Make sure that you recharge it once every three months to avoid the battery to over-discharge.

The lithium ion battery inside this product contains substances harmful to the environment.

ATTENTION:

• The battery must be removed from the appliance before it is scrapped.
• The appliance must be disconnected from the supply mains when removing the battery.
• The battery is to be disposed of safely. Please do not discard waste batteries. Leave them to a professional organization.

Removing the Battery (for scrapping):

1. Remove the dust compartment and cyclone assembly, and remove the two screws on the inner wall of the vacuum near the dust compartment release switch.
2. Remove the top fan filter, and remove the screw used for fixing the cover of the handle on the inner wall of the vacuum.
3. Open the handle cover along the gap at the top of the handle and gently slide it up to remove the cover.
4. Unplug the 3 connectors inside the handle from the battery.
5. Slide out the battery pack.

Transportation

• It is recommended to transport the vacuum in its original packaging.

Note

• Rinse the filter at least once a month with tap water. For details please refer to Maintenance.

Beijing Roborock Technology Co., Ltd. declares that this equipment is in compliance with the applicable Directives and European Norms, and amendments. The full text of the EU declaration of conformity is available at: http://www.mi.com/global/service/support/declaration.html

Product Overview

Vacuum Cleaner

The diagram illustrates the Mi Handheld Vacuum Cleaner. Key components are indicated:

• Top Fan Filter
• Dust Compartment: Notes mention that patterns on the compartment are from the production process, not defects. Powder inside is lubricating powder, not a sign of use.
• Dust Compartment Opening Switch
• Dust Compartment Release Switch
• MAX Button: Press and hold the switch, then press the Max button to change to MAX mode. In MAX mode, the fan runs at full speed, reducing battery life and blowing hot air. Turning off the vacuum reverts it to Standard mode.
• MAX-LED: Indicates MAX mode (On) or Standard Mode (Off).
• On/Off Switch: Push to turn on, release to turn off.
• LED Battery Status Indicator:
  • Red: Battery level < 20%
  • Orange: Battery level of 20-60%
  • White: Battery level > 60%
  • Off: Battery is fully charged or the vacuum is turned off.
  • Slowly Blinking Orange: Temporary protection due to high or low battery temperature. Wait for normal temperature before use or charging.
  • Slowly Blinking Red: Low battery, charge before use.
  • Quickly Blinking Red: Battery charging protection (unplug for one minute and plug in again) or hardware error status (contact after-sales service).
• Charging Port

Accessories

The following accessories are included or available:

• Power Supply
• Crevice Nozzle: Suitable for vacuuming narrow crevices such as around doors, windows, and dead corners of stairs.
• Brush Nozzle: Suitable for vacuuming sofas, seats, etc.
• Floor Attachment: Suitable for vacuuming different types of floors.
• Bed Attachment: Suitable for vacuuming dust and mites on textile surfaces like beds and curtains.
• Extension Rod

Installation

Vacuum and Accessories Installation Diagram

Method One:

• Illustrates connecting the extension rod and then an attachment, with an indicator showing insertion until it clicks into place.

Method Two:

• Illustrates connecting an attachment to the extension rod. A diagram shows pushing down a quick release switch to remove a part. An indicator shows insertion until it clicks into place.

Mi Handheld Vacuum Cleaner Docking Station Installation

* The docking station needs to be purchased separately. Visit: www.mi.com

1. The docking station is an optional accessory.
2. Install the docking station in a cool, dry place near a power outlet, away from direct sunlight.
3. Use appropriate mounting hardware for your wall type. Ensure the installation area is clear of pipes (gas, water, air, electricity, drainage).
4. It is recommended to hire a professional for installation and use protective gear (clothing, goggles).
5. Use a 6 mm drill for holes, insert wall plugs, align docking station holes, and tighten screws.

Diagrams show:

• Storing the vacuum on the docking station.
• A close-up of a screw, wall plug, and charging socket.
• Recommended height: 1.06 meters from the ground.
• Pulling the vacuum down onto the docking station to charge.

Instructions

Charging

LED Battery Status Indicator:

• Red: Battery level < 20%
• Orange: Battery level of 20 - 60%
• White: Battery level > 60%
• Off: Battery is fully charged or the vacuum is turned off.

Notes:

1. When using the vacuum for the first time, fully charge it before use.
2. When charging, the vacuum stops operating and enters Charging mode.
3. After continuous use in MAX mode, the battery may become hot, increasing charging time. Allow the vacuum to cool down for 30 minutes before charging.

Please read the Safety Instructions in this User Manual before proceeding.

Diagrams show:

• Charging the vacuum by power supply.
• Charging the vacuum by docking station.

Vacuum Usage

1. Some carpets may fluff when vacuumed by the handheld vacuum cleaner or upholstery brush. Use the brush or crevice nozzle for vacuuming in such cases.
2. Before vacuuming highly polished floors, check the floor brush for foreign objects to avoid scratching.
3. Ensure the dust compartment is installed before using the handheld vacuum cleaner.
4. Do not block the exhaust port when vacuuming.
5. For fine dust (e.g., flour), use the vacuum for small amounts only.
6. Do not use the vacuum to pick up sharp objects, small toys, pins, paper clips, etc., to avoid damage to the vacuum cleaner and the floor.
7. When cleaning dangerous areas like stairs and windows, pay attention to personal safety.
8. Do not place the vacuum on tables or chairs, or lean it against items, to avoid damage from dropping or slipping.
9. The vacuum's brush movement may cause uneven gloss on waxed floors. Wipe the floor with a damp cloth and polish with wax.

Automatic Turn-off Feature

1. If rotating parts get stuck, the product may automatically turn off. It can be used again after removing foreign objects.
2. If the motor enters overheating protection mode, it will automatically turn off. Wait for the electric brush head's temperature to cool down before using it again.

Cleaning String-like Materials from the Roller Brush

1. If the electric brush head picks up large foreign objects or gets wrapped in hair, causing the roller to stop rotating, clean the roller immediately.
2. Before removing foreign objects from the roller, detach the brush head from the vacuum to prevent accidental activation and personal injury.
3. Be careful of sharp objects when clearing materials from the roller.
4. If objects wrapped around the roller cannot be removed smoothly, refer to the "Cleaning the Roller" section to remove and clean the roller first.

Brush Head Usage

1. Crevice Nozzle: Suitable for vacuuming narrow crevices such as around doors, windows, and dead corners of stairs.
2. Brush Nozzle: Suitable for vacuuming sofas, seats, etc.
3. Bed Attachment: Suitable for vacuuming dust and mites on textile surfaces like beds and curtains.
4. Floor Attachment: Suitable for vacuuming different types of floors.

Note: Brushes can also be used independently to vacuum dust from the vacuum cleaner or electric brush heads.

Product Maintenance

1. Always use genuine parts; otherwise, warranty may be voided.
2. If the filter or nozzle is clogged, the fan will stop working shortly after turning on the vacuum. Rinse the filter, nozzle, etc., immediately.
3. When the vacuum will not be used for an extended period, store it in a cool, dry place, away from direct sunlight or humid environments.
4. If the vacuum is not going to be used for an extended period, fully charge it, unplug its power adapter, and store it in a cool, dry place. Recharge it every three months to avoid battery over-discharge.

Cleaning the Vacuum

Wipe the vacuum with a soft dry cloth.

Maintenance

Cleaning the Dust Compartment

* Recommended to clean the dust compartment at least once a month.

1. Before cleaning, disconnect the adapter and ensure the vacuum is turned off. Empty the dust compartment as soon as possible once the dust reaches the "MAX" mark, as it affects vacuuming performance.
2. To empty the dust compartment, push the switch on the dust compartment in the direction of the arrow to open the bottom cover and empty it into a trash can.
3. While pushing the switch next to the dust compartment in the direction of the arrow, pull the compartment away from the vacuum to rinse it with water.
4. It is recommended to rinse the dust compartment with water at least once a month. Wipe the contact points of the vacuum with a soft dry cloth if they are dirty.
5. After the dust compartment is completely dried, follow the steps shown in the figure below to reinstall it.

Caution: Do not use detergents, polishes, or air fresheners to rinse the dust compartment. Do not rinse it in a dishwasher or any other device.

Rinsing the Internal Filter and Cyclone Assembly

* Recommended to rinse at least once a month.

1. Before cleaning, ensure the product is disconnected from the supply and be careful not to press the switch to turn on the vacuum.
2. Regularly inspect and rinse the internal filter and cyclone assembly to ensure optimal performance.
3. When cleaning fine dust or using MAX mode frequently, the filter may need rinsing more often.
4. To rinse the internal filter and cyclone assembly: first remove the dust compartment; second, rotate the cyclone assembly counter-clockwise and remove it; third, remove the internal filter, and rinse them with tap water.
5. Rinse the filter and cyclone assembly until clean. Wring out the filter after rinsing.
6. To thoroughly dry the filter and cyclone assembly, keep them in a ventilated or cool place for at least 24 hours after cleaning.
7. After drying, reinstall the filter and cyclone assembly by aligning it with the unlocked position and turning it clockwise until it locks into place.

Caution: Do not rinse the filter in a dishwasher or washing machine, nor dry it in a tumble dryer, oven, microwave, or near an open fire.

Rinsing the Top Fan Filter

* Recommended to rinse at least once a month.

1. Turn the top fan filter counterclockwise to the unlocked position and remove it from the vacuum.
2. Rinse the inside of the top filter under the tap. Rotate the filter while rinsing to ensure all dust in the filter gaps is rinsed out. Tap the filter several times against the sink to remove remaining dust before rinsing.
3. Repeat this process four to five times until the filter is clean.
4. To thoroughly dry the filter, keep it in a ventilated or cool place for at least 24 hours after cleaning.
5. After drying, reinstall the filter by aligning it with the unlocked position and turning it clockwise until it locks into place.

Cleaning the Roller

Follow the instructions below to check and clean the roller regularly to maintain performance. Before removing the roller, detach the brush head from the vacuum to avoid personal injury from accidental activation.

Caution: The bed attachment roller must be removed and cleaned separately. The bed attachment and floor attachment contain electrical components, and the floor attachment roller contains bearings; do not clean these parts with water.

Cleaning the Floor Attachment

1. Place the floor attachment as shown in the figure (facing your direction). Use a coin to turn the lock counterclockwise by 90° to the unlocked position.
2. Turn the end cap to the open position. Gently slide the roller away from the head.
3. Separate the end cap from the roller and remove any hair wrapped around the roller and end cap.
4. After cleaning, install the end cap back on the roller.
5. After confirming the end cap is installed, put the roller back as shown in the figure. Once the roller is installed, turn the end cap to the locked position.
6. Rotate the latch clockwise by 90° to the locked position to secure the roller.

Cleaning the Bed Attachment

1. With the side latch of the brush head facing your direction, use a coin to turn the latch counterclockwise until it comes off.
2. After removing the latch, remove the roller from the bed attachment.
3. Rinse and clean the roller.
4. Place the roller vertically and keep it in a ventilated or cool place for at least 24 hours to dry thoroughly.
5. After confirming the roller is completely dry, put the roller back in place.
6. With the side latch of the brush head facing your direction, use a coin to turn the latch clockwise into the locked position, while making sure the roller is in place.

Specifications

Vacuum Cleaner

Power Supply

Troubleshooting

WEEE Information

All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points.

Warranty Notice

THIS WARRANTY GIVES YOU SPECIFIC RIGHTS, AND YOU MAY HAVE OTHER RIGHTS CONVEYED BY LAWS OF YOUR COUNTRY, PROVINCE OR STATE. INDEED, IN SOME COUNTRIES, PROVINCES OR STATES, CONSUMER LAW MAY IMPOSE A MINIMUM WARRANTY PERIOD.

OTHER THAN AS PERMITTED BY LAW, XIAOMI DOES NOT EXCLUDE, LIMIT OR SUSPEND OTHER RIGHTS YOU MAY HAVE. FOR A FULL UNDERSTANDING OF YOUR RIGHTS WE INVITE YOU TO CONSULT THE LAWS OF YOUR COUNTRY, PROVINCE OR STATE.

1. LIMITED PRODUCT WARRANTY

XIAOMI warrants that the Products are free from defects in materials and workmanship under normal use and use in accordance with the respective Product user manual, during the Warranty Period. The duration and conditions related to the legal warranties are provided by respective local laws. For more information about the consumer warranty benefits, please refer to Xiaomi's official website https://www.mi.com/en/service/warranty/.

Xiaomi warrants to the original purchaser that its Xiaomi Product will be free from defects in materials and workmanship under normal use in the period mentioned above. Xiaomi does not guarantee that the operation of the Product will be uninterrupted or error free. Xiaomi is not liable for damages arising from non-compliance with the instructions related to the use of the Product.

2. REMEDIES

If a hardware defect is found and a valid claim is received by Xiaomi within the Warranty Period, Xiaomi will either (1) repair the product at no charge, (2) replace the product, or (3) refund the Product, excluding potential shipping costs.

3. HOW TO OBTAIN WARRANTY SERVICE

To obtain warranty service, you must deliver the Product, in its original packaging or similar packaging providing an equal degree of Product protection, to the address specified by Xiaomi. Except to the extent prohibited by applicable law, Xiaomi may require you to present proofs or proof of purchase and / or comply with registration requirements before receiving warranty service.

4. EXCLUSIONS AND LIMITATIONS

Unless otherwise stipulated by Xiaomi, this Limited Warranty applies only to the Product manufactured by or for Xiaomi and identifiable by the trademarks, trade name or “Xiaomi” or “Mi” logo. The Limited Warranty does not apply to any (a) Damage due to acts of nature or God, for example, lightning strikes, tornadoes, flood, fire, earthquake or other external causes; (b) Negligence; (c) Commercial use; (d) Alterations or modifications to any part of the Product; (e) Damage caused by use with non-Xiaomi products; (f) Damage caused by accident, abuse or misuse; (g) Damage caused by operating the Product outside the permitted or intended uses described by Xiaomi or with improper voltage or power supply; or (h) Damage caused by service (including upgrades and expansions) performed by anyone who is not a representative of Xiaomi.

It is your responsibility to backup any data, software, or other materials you may have stored or preserved on the product. It is likely that the data, software or other materials in the equipment will be lost or reformatted during the service process, Xiaomi is not responsible for such damage or loss.

No Xiaomi reseller, agent, or employee is authorized to make any modification, extension, or addition to this Limited Warranty. If any term is held to be illegal or unenforceable, the legality or enforceability of the remaining terms shall not be affected or impaired.

Except as prohibited by laws or otherwise promised by Xiaomi, the after-sales services shall be limited to the country or region of the original purchase.

Products which were not duly imported and/or were not duly manufactured by Xiaomi and/or were not duly acquired from Xiaomi or a Xiaomi's official seller are not covered by the present warranties. As per applicable law you may benefit from warranties from the non-official retailer who sold the product. Therefore, Xiaomi invites you to contact the retailer from whom you purchased the product. The present warranties do not apply in Hong Kong and Taiwan.

5. IMPLIED WARRANTIES

Except to the extent prohibited by applicable law, all implied warranties (including warranties of merchantability and fitness for a particular purpose) will have a limited duration up to a maximum duration of this limited warranty. Some jurisdictions do not allow limitations on the duration of an implied warranty, so the above limitation will not be applied in these cases.

6. DAMAGE LIMITATION

Except to the extent prohibited by applicable law, Xiaomi shall not be liable for any damages caused by accidents, indirect, special or consequential damages, including but not limited to loss of profits, revenue or data, damages resulting from any breach of express or implied warranty or condition, or under any other legal theory, even if Xiaomi has been informed of the possibility of such damages. Some jurisdictions do not allow the exclusion or limitation of special, indirect, or consequential damages, so the above limitation or exclusion may not apply to you.

7. XIAOMI CONTACTS

For customers, please visit the website: https://www.mi.com/en/service/warranty/

The contact person for the after-sale service may be any person in Xiaomi's authorized service network, Xiaomi's authorized distributors or the final vendor who sold the products to you. If in doubt please contact the relevant person as Xiaomi may identify.