VEVOR Smart Cat Litter Box

Quick Connect Guide

1. Download the "Tuya Smart" app by searching in your app store.
2. Install the app, register, and click "Add Device" on the main page.
3. On the device, long press the network connection button. The buzzer will sound, and the WiFi indicator light will flash rapidly.
4. Wait for the mobile app to recognize the smart litter box device (approximately 5 seconds) and click "add".
5. Follow the app prompts to complete the binding process.

Attention: If the mobile app prompts binding failure, please check if the WiFi name and password are correct. Restart your phone and router, then try rebinding.

Indicator Status: A constant light indicates a normal network connection, while a flashing light indicates network configuration.

Description of Buttons and Indicator Lights

Buttons:

• Clean/Empty/Reset Button:
  • Press and hold for 3 seconds (1 beep): Initiate cleaning of cat waste.
  • Press and hold for 7 seconds (2 beeps): Initiate emptying the litter box.
  • Press and hold for 3 seconds (1 beep): Reset the device.
• Network Configuration Button: Press and hold for 3 seconds (1 beep): Enter network configuration mode.
• Mode Switch Button: Press and hold for 3 seconds (with sound): Switch between automatic and manual modes.
• Standby/Child Lock Button:
  • Short press for 1 second: Enter standby mode (device sounds once).
  • Simultaneously press the Reset and Network Settings buttons for 3 seconds (with a beep): Unlock the child lock.

Indicator Lights:

• Standby: Always on.
• Automatic: Always on.
• Cleaning: Constant light indicates cleaning is in progress; flashing indicates cleaning is paused.
• Clear: Constant light indicates the clear function is active; flashing indicates it is paused.
• WiFi: Always on indicates normal network connection; flashing indicates network configuration.
• Exception: Constantly on indicates equipment malfunction (e.g., drawers not inserted, drum unable to reset).
• Reset: Constant light indicates reset is in progress; flashing indicates reset is paused.

Important Notes

• The smart cat litter box is suitable for cats weighing 2KG or more, with a recommended maximum weight of 15KG.
• Press the reset button after each litter addition.

Technical Specifications and Compliance

Input Voltage: 12V DC

Input Current: 2A

Power Consumption: 24W

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Compliance: ROHS

Company Information

Manufacturer/Origin: Made in China

Imported to USA: Sanven Technology Ltd., Suite 250, 9166 Anaheim Place, Rancho, CA 91730

Chinese Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

E-Warranty

Please refer to the website for Technical Support and E-Warranty details.