Allegion

Installation Steps:

1. Measure and Cut: Measure the door sill at the bottom of the frame. Cut the threshold to span the full width of the opening.
2. Notch for Jamb Stops: If the door frame has side jamb stops, notch the threshold ends as needed to ensure a proper fit.
3. Secure the Threshold: Place the threshold on the sill and fasten it in place using the provided screws.
4. Check Door Operation: Open and close the door several times to confirm that it latches and closes smoothly. Make any necessary adjustments to the threshold.

Product Classification:

The UL Classified CUL US mark indicates compliance with safety standards.

Positive Pressure Tested Gasketing Materials for Fire Doors. Intended for Application to/ with listed steel frames and/or classified steel covered composite, hollow metal type fire doors rated up to 3 hours, wood and plastic covered composite type fire doors rated up to 1-1/2 hours, and wood core type fire doors rated up to 20 minutes. Meets UL10B, UL10C and CAN4-S104-2010 Category J.17L5 9903