ASSEMBLY INSTRUCTIONS
This document provides assembly instructions for a sofa. It is intended for residential use only.
2 - People are recommended for assembly.
CHECK BEFORE STARTING
Double-check all parts, hardware and accessories listed are all accounted for.
Are there any irregularities or flaws in the parts? We can send replacements!
We recommend reviewing the pre-assembly handouts. Even experts need a refresher now and then!
Please review the assembly instructions and all diagrams prior to assembling.
PRE ASSEMBLY INTRODUCTION
We understand building ready-to-assemble furniture can be a challenging experience for some. To help avoid confusion, we have provided some helpful tips that may speed up the process.
Teamwork
ALWAYS have at least two people to help with transporting and assembling the product to avoid potential injury and/or damage.
Suitable Location
Assembling near the area of the intended location is highly recommended.
Sufficient Space
Make sure you have enough space to move around during the assembly.
Avoid Scratches
Use cardboard, blankets or a carpeted area while assembling furniture to prevent scratches and damages.
Flat Surface
Make sure the furniture rests on a flat and level surface with each leg evenly touching the floor.
ASSEMBLY AND CARE ADVICE
! FAILURE TO FOLLOW THE GUIDELINES BELOW MAY RESULT IN INJURY AND/OR PROPERTY DAMAGE.
Position each part correctly and insert screws or bolts into their respective holes.
Turn clockwise to tighten and only tighten when step is completed or when instructed to do so.
Use the appropriate hand tools or power tools for assembly. Select steps, such as tightening screws and/or bolts, may require hand tools to avoid causing damage during assembly.
Save the instructions and store any supplied tools for later maintenance.
After two weeks, check and tighten any loose hardware and repeat again every six months thereafter.
IT IS THE USER'S RESPONSIBILITY TO MAINTAIN THE FURNITURE. THE HARDWARE MAY LOOSEN OVER TIME AND MAY CAUSE THE FURNITURE TO BE WOBBLY AND UNABLE TO SUPPORT ITS INTENDED WEIGHT CAPACITY. THIS MAY LEAD TO COLLAPSE AND MAY CAUSE SERIOUS INJURY.
PARTS
Sofa
1 pc.
HARDWARE
A Rear wood leg
2 pc.
B Front wood leg
2 pc.
C Plastic spacer 11*40*2mm
5 pc.
D Middle support leg 5/16*14.5cm
1 pc.
ASSEMBLY INSTRUCTIONS
Step 1
Take out the legs and hardware package from the underneath zipper bag (Please check the hardware QTY as above).
Assemble the wood legs with hardware, make sure to turn them tightly.
Step 2
Assembly completed
ASSEMBLY COMPLETED
Please ensure the furniture rests on an even and flat surface. If the product wobbles or feels loose, double-check all bolts and/or screws are properly tightened and secured.
Keep this handy!
Please retain this instruction manual and any order-related information for future reference.
☑ Lift, don't drag!
To avoid damage to product please always LIFT the product when transporting or adjusting the placement.
