Sofa Assembly Instructions
Parts List
Please identify all parts and hardware before beginning assembly. Ensure you have received all components as listed below.
BOX-1 Components:
| Part Label | Description | Quantity | Details |
|---|---|---|---|
| A | Sofa Frame/Base | x1 | Main structural component. |
| BL, BR, F | Armrest Components | x1 set | Parts for constructing armrests. |
| C | Back Cushion Support | x3 | Supports for the back cushions. |
| E | Legs | x4 | Feet for the sofa base. |
| D | Seat Cushions | x2 | Cushions for seating. |
BOX-2 Components:
| Part Label | Description | Quantity | Details |
|---|---|---|---|
| R | Armrest Component | x1 | Additional part for armrest assembly. |
Hardware:
| Item | Description | Quantity |
|---|---|---|
| 1 | Screw | x4 |
| 2 | Screw | x4 |
| 3 | Screw | x4 |
Screw 1: 5/16*8CM
Screw 2: 5/16*19MM
Screw 3: M5/40*100MM
Preparation Notes:
? Open the Velcro on the non-woven fabric cover on the bottom of the sofa to access the hardware and legs.
? Please open the black woven fabric with Velcro closure on the bottom of the frame, then cut off any black straps before removing parts for assembly.
? Please allow at least 24 hours for the cushions to recover to their natural state after removing them from the package.
Assembly Instruction - Step 1
Attach the legs and armrests to the main sofa frame.
Action: Secure the four legs (E) to the underside of the sofa frame (A) using the provided screws.
Action: Attach the armrest components (L, R, BL, BR, F) to the sides of the sofa frame (A) using the provided screws (hardware items 1, 2, and 3). The diagrams show specific attachment points.
Assembly Instruction - Step 2
Attach the back cushion supports.
Action: Position the back cushion supports (C) onto the rear of the sofa frame. Arrows indicate an upward and inward placement into designated slots or brackets.
Visual Check: The diagram shows two methods of attachment. The correct method, indicated by a checkmark (✔️), involves aligning the supports properly. The incorrect method, indicated by a cross (❌), shows misaligned parts.
Assembly Instruction - Step 3
Place cushions and finalize assembly.
Action: Place the seat cushions (D) onto the sofa base. Arrows indicate their position.
Action: Place the back cushions (C) onto the attached back supports.
Action: Close the Velcro fasteners on the back of the sofa to secure the fabric cover.
The final diagram shows the fully assembled sofa.
